linux-kernel - [PATCH 5.15 026/177] arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 Dec 2021 15:32:56 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Mathew McBride <matt@...verse.com.au>,
        Shawn Guo <shawnguo@...nel.org>
Subject: [PATCH 5.15 026/177] arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys

From: Mathew McBride <matt@...verse.com.au>

commit c88c5e461939a06ae769a01649d5c6b5a156f883 upstream.

gpio-keys already 'inherits' the interrupts from the controller
of the specified GPIO, so having another declaration is redundant.
On >=v5.15 this started causing an oops under gpio_keys_probe as
the IRQ was already claimed.

Signed-off-by: Mathew McBride <matt@...verse.com.au>
Fixes: 418962eea358 ("arm64: dts: add device tree for Traverse Ten64 (LS1088A)")
Cc: stable@...r.kernel.org
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts |    2 --
 1 file changed, 2 deletions(-)

--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -38,7 +38,6 @@
 		powerdn {
 			label = "External Power Down";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
 			linux,code = <KEY_POWER>;
 		};
 
@@ -46,7 +45,6 @@
 		admin {
 			label = "ADMIN button";
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};