linux-kernel - Re: [PATCH v5 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 21 Dec 2021 16:14:16 +0800
From:   hammer hsieh <hammerh0314@...il.com>
To:     Greg KH <gregkh@...uxfoundation.org>
Cc:     robh+dt@...nel.org, linux-serial@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        jirislaby@...nel.org, p.zabel@...gutronix.de, wells.lu@...plus.com,
        Hammer Hsieh <hammer.hsieh@...plus.com>
Subject: Re: [PATCH v5 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver

Greg KH <gregkh@...uxfoundation.org> 於 2021年12月20日 週一 下午11:51寫道：
>
> On Mon, Dec 13, 2021 at 03:10:07PM +0800, Hammer Hsieh wrote:
> > +/* Register offsets */
> > +#define SUP_UART_DATA                        0x00
> > +#define SUP_UART_LSR                 0x04
> > +#define SUP_UART_MSR                 0x08
> > +#define SUP_UART_LCR                 0x0C
> > +#define SUP_UART_MCR                 0x10
> > +#define SUP_UART_DIV_L                       0x14
> > +#define SUP_UART_DIV_H                       0x18
> > +#define SUP_UART_ISC                 0x1C
> > +#define SUP_UART_TX_RESIDUE          0x20
> > +#define SUP_UART_RX_RESIDUE          0x24
> > +
> > +/* Line Status Register bits */
> > +#define SUP_UART_LSR_TXE             BIT(6) /* tx empty */
> > +#define SUP_UART_LSR_BC                      BIT(5) /* break condition status */
> > +#define SUP_UART_LSR_FE                      BIT(4) /* frame error status */
> > +#define SUP_UART_LSR_OE                      BIT(3) /* overrun error status */
> > +#define SUP_UART_LSR_PE                      BIT(2) /* parity error status */
> > +#define SUP_UART_LSR_RX                      BIT(1) /* 1: receive fifo not empty */
> > +#define SUP_UART_LSR_TX                      BIT(0) /* 1: transmit fifo is not full */
> > +#define SUP_UART_LSR_TX_NOT_FULL     1
> > +#define SUP_UART_LSR_BRK_ERROR_BITS  GENMASK(5, 2)
> > +
> > +/* Line Control Register bits */
> > +#define SUP_UART_LCR_BC                      BIT(5) /* break condition select */
> > +#define SUP_UART_LCR_PR                      BIT(4) /* parity bit polarity select */
> > +#define SUP_UART_LCR_PE                      BIT(3) /* parity bit enable */
> > +#define SUP_UART_LCR_ST                      BIT(2) /* stop bits select */
> > +#define SUP_UART_LCR_WL5             0x00 /*  word length 5 */
> > +#define SUP_UART_LCR_WL6             0x01 /*  word length 6 */
> > +#define SUP_UART_LCR_WL7             0x02 /*  word length 7 */
> > +#define SUP_UART_LCR_WL8             0x03 /*  word length 8 (default) */
> > +
> > +/* Modem Control Register bits */
> > +#define SUP_UART_MCR_LB                      BIT(4) /* Loopback mode */
> > +#define SUP_UART_MCR_RI                      BIT(3) /* ring indicator */
> > +#define SUP_UART_MCR_DCD             BIT(2) /* data carrier detect */
> > +#define SUP_UART_MCR_RTS             BIT(1) /* request to send */
> > +#define SUP_UART_MCR_DTS             BIT(0) /* data terminal ready */
> > +
> > +/* Interrupt Status/Control Register bits */
> > +#define SUP_UART_ISC_RXM             BIT(5) /* RX interrupt enable */
> > +#define SUP_UART_ISC_TXM             BIT(4) /* TX interrupt enable */
> > +#define SUP_UART_ISC_RX                      BIT(1) /* RX interrupt status */
> > +#define SUP_UART_ISC_TX                      BIT(0) /* TX interrupt status */
> > +
> > +#define SUP_DUMMY_READ                       BIT(16) /* drop bytes received on a !CREAD port */
> > +#define SUP_UART_NR                  5
>
> Aren't most of these defines already in the kernel header files?  Why
> create them again?
>

If for reduce code.
I can add #include<linux/serial_reg.h>
And remove some overlap define name.

#define SUP_UART_LCR_PR -> UART_LCR_EPAR
#define SUP_UART_LCR_PE -> UART_LCR_PARITY
#define SUP_UART_LCR_ST -> UART_LCR_STOP
#define SUP_UART_LCR_WL5 -> UART_LCR_WLEN5
#define SUP_UART_LCR_WL6 -> UART_LCR_WLEN6
#define SUP_UART_LCR_WL7 -> UART_LCR_WLEN7
#define SUP_UART_LCR_WL8 -> UART_LCR_WLEN8

#define SUP_UART_MCR_LB -> UART_MCR_LOOP
#define SUP_UART_MCR_RI -> UART_MCR_OUT2 ?
#define SUP_UART_MCR_DCD -> UART_MCR_OUT1 ?
#define SUP_UART_MCR_RTS -> UART_MCR_RTS
#define SUP_UART_MCR_DTS -> UART_MCR_DTR

But the rest define didn't match internal #include<linux/serial_reg.h>
, those define still need to keep.
Some use SUP_xxxx specific define.
Some use internal #include<linux/serial_reg.h>, it is strange.