| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Dec 2021 10:26:59 +0000
From: Ricky WU <ricky_wu@...ltek.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: "tommyhebb@...il.com" <tommyhebb@...il.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v3] mmc: rtsx: improve performance for multi block rw
> -----Original Message-----
> From: Ulf Hansson <ulf.hansson@...aro.org>
> Sent: Tuesday, December 21, 2021 8:51 PM
> To: Ricky WU <ricky_wu@...ltek.com>
> Cc: tommyhebb@...il.com; linux-mmc@...r.kernel.org;
> linux-kernel@...r.kernel.org
> Subject: Re: [PATCH v3] mmc: rtsx: improve performance for multi block rw
>
> On Tue, 21 Dec 2021 at 13:24, Ricky WU <ricky_wu@...ltek.com> wrote:
> >
> > Improving performance for the CMD is multi-block read/write and the
> > data is sequential.
> > sd_check_multi_seq() to distinguish multi-block RW (CMD 18/25) or
> > normal RW (CMD 17/24) if the CMD is multi-block and the data is
> > sequential then call to sd_rw_multi_seq()
> >
> > This patch mainly to control the timing of reply at CMD 12/13.
> > Originally code driver reply CMD 12/13 at every RW (CMD 18/25).
> > The new code to distinguish multi-block RW(CMD 18/25) and the data is
> > sequential or not, if the data is sequential RW driver do not send CMD
> > 12 and bypass CMD 13 until wait the different direction RW CMD or
> > trigger the delay_work to sent CMD 12.
> >
> > run benchmark result as below:
> > SD Card : Samsumg Pro Plus 128GB
> > Number of Samples:100, Sample Size:10MB <Before> Read : 86.9 MB/s,
> > Write : 38.3 MB/s <After> Read : 91.5 MB/s, Write : 55.5 MB/s
>
> A much nicer commit message, thanks a lot! Would you mind running some
> additional tests, like random I/O read/writes?
>
> Also, please specify the benchmark tool and command you are using. In the
> meantime, I will continue to look at the code.
>
The Tool just use Ubuntu internal GUI benchmark Tool in the "Disks"
and the Tool don't have random I/O to choice...
Do you have any suggestion for testing random I/O
But we think random I/O will not change much
BR,
Ricky
> Kind regards
> Uffe
>
> >
> > Signed-off-by: Ricky Wu <ricky_wu@...ltek.com>
> > ---
> > v2:
> > make commit message more clarity
> > change function name for more clarity
> > v3:
> > add more commit message and benchmark result
> > ---
> > drivers/mmc/host/rtsx_pci_sdmmc.c | 185
> > +++++++++++++++++++++++++++++-
> > 1 file changed, 180 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c
> > b/drivers/mmc/host/rtsx_pci_sdmmc.c
> > index 58cfaffa3c2d..ee2b0eec6422 100644
> > --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> > +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> > @@ -22,6 +22,8 @@
> > #include <asm/unaligned.h>
> > #include <linux/pm_runtime.h>
> >
> > +enum RW_MODE {NORMAL_RW, SEQ_RW};
> > +
> > struct realtek_pci_sdmmc {
> > struct platform_device *pdev;
> > struct rtsx_pcr *pcr;
> > @@ -31,6 +33,7 @@ struct realtek_pci_sdmmc {
> >
> > struct work_struct work;
> > struct mutex host_mutex;
> > + struct delayed_work rw_idle_work;
> >
> > u8 ssc_depth;
> > unsigned int clock;
> > @@ -46,6 +49,12 @@ struct realtek_pci_sdmmc {
> > s32 cookie;
> > int cookie_sg_count;
> > bool using_cookie;
> > +
> > + enum RW_MODE rw_mode;
> > + u8 prev_dir;
> > + u8 cur_dir;
> > + u64 prev_sec_addr;
> > + u32 prev_sec_cnt;
> > };
> >
> > static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios
> > *ios); @@ -226,6 +235,14 @@ static void sd_send_cmd_get_rsp(struct
> realtek_pci_sdmmc *host,
> > dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg =
> 0x%08x\n",
> > __func__, cmd_idx, arg);
> >
> > + if (cmd_idx == MMC_SEND_STATUS && host->rw_mode ==
> SEQ_RW) {
> > + cmd->resp[0] = R1_READY_FOR_DATA |
> (R1_STATE_TRAN << 9);
> > + goto out;
> > + }
> > +
> > + if (!mmc_op_multi(cmd->opcode))
> > + host->rw_mode = NORMAL_RW;
> > +
> > rsp_type = sd_response_type(cmd);
> > if (rsp_type < 0)
> > goto out;
> > @@ -542,6 +559,93 @@ static int sd_write_long_data(struct
> realtek_pci_sdmmc *host,
> > return 0;
> > }
> >
> > +static int sd_rw_multi_seq(struct realtek_pci_sdmmc *host, struct
> > +mmc_request *mrq) {
> > + struct rtsx_pcr *pcr = host->pcr;
> > + struct mmc_host *mmc = host->mmc;
> > + struct mmc_card *card = mmc->card;
> > + struct mmc_data *data = mrq->data;
> > + int uhs = mmc_card_uhs(card);
> > + u8 cfg2;
> > + int err;
> > + size_t data_len = data->blksz * data->blocks;
> > +
> > + cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 |
> > + SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 |
> SD_RSP_LEN_0;
> > +
> > + if (!uhs)
> > + cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
> > +
> > + rtsx_pci_init_cmd(pcr);
> > + sd_cmd_set_data_len(pcr, data->blocks, data->blksz);
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
> > + DMA_DONE_INT, DMA_DONE_INT);
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3,
> > + 0xFF, (u8)(data_len >> 24));
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2,
> > + 0xFF, (u8)(data_len >> 16));
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1,
> > + 0xFF, (u8)(data_len >> 8));
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF,
> > + (u8)data_len);
> > +
> > + if (host->cur_dir == DMA_DIR_FROM_CARD)
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
> > + 0x03 | DMA_PACK_SIZE_MASK,
> > + DMA_DIR_FROM_CARD | DMA_EN |
> DMA_512);
> > + else
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
> > + 0x03 | DMA_PACK_SIZE_MASK,
> > + DMA_DIR_TO_CARD | DMA_EN | DMA_512);
> > +
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
> > + 0x01, RING_BUFFER);
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2);
> > +
> > + if (host->cur_dir == DMA_DIR_FROM_CARD)
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
> 0xFF,
> > + SD_TRANSFER_START |
> SD_TM_AUTO_READ_3);
> > + else
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
> 0xFF,
> > + SD_TRANSFER_START |
> > + SD_TM_AUTO_WRITE_3);
> > +
> > + rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
> > + SD_TRANSFER_END, SD_TRANSFER_END);
> > + rtsx_pci_send_cmd_no_wait(pcr);
> > +
> > + if (host->cur_dir == DMA_DIR_FROM_CARD)
> > + err = rtsx_pci_dma_transfer(pcr, data->sg,
> host->sg_count, 1, 10000);
> > + else
> > + err = rtsx_pci_dma_transfer(pcr, data->sg,
> > + host->sg_count, 0, 10000);
> > +
> > + if (err < 0) {
> > + sd_clear_error(host);
> > + return err;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int sd_stop_rw_multi_seq(struct realtek_pci_sdmmc *host,
> > +struct mmc_request *mrq) {
> > + struct rtsx_pcr *pcr = host->pcr;
> > + struct mmc_command *cmd;
> > +
> > + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
> > +
> > + cmd->opcode = MMC_STOP_TRANSMISSION;
> > + cmd->arg = 0;
> > + cmd->busy_timeout = 0;
> > + if (host->cur_dir == DMA_DIR_FROM_CARD)
> > + cmd->flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
> MMC_CMD_AC;
> > + else
> > + cmd->flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
> MMC_CMD_AC;
> > + sd_send_cmd_get_rsp(host, cmd);
> > + udelay(50);
> > + rtsx_pci_write_register(pcr, RBCTL, RB_FLUSH, RB_FLUSH);
> > + kfree(cmd);
> > + return 0;
> > +}
> > +
> > static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc
> > *host) {
> > rtsx_pci_write_register(host->pcr, SD_CFG1, @@ -796,6 +900,45
> > @@ static inline int sd_rw_cmd(struct mmc_command *cmd)
> > (cmd->opcode == MMC_WRITE_BLOCK); }
> >
> > +static void sd_rw_idle_work(struct work_struct *work) {
> > + struct delayed_work *dwork = to_delayed_work(work);
> > + struct realtek_pci_sdmmc *host = container_of(dwork,
> > + struct realtek_pci_sdmmc, rw_idle_work);
> > + struct mmc_command *cmd;
> > +
> > + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
> > +
> > + cmd->opcode = MMC_STOP_TRANSMISSION;
> > + cmd->arg = 0;
> > + cmd->busy_timeout = 0;
> > + if (host->cur_dir == DMA_DIR_FROM_CARD)
> > + cmd->flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
> MMC_CMD_AC;
> > + else
> > + cmd->flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
> > + MMC_CMD_AC;
> > +
> > + sd_send_cmd_get_rsp(host, cmd);
> > + host->rw_mode = NORMAL_RW;
> > + kfree(cmd);
> > +}
> > +
> > +static int sd_check_multi_seq(struct realtek_pci_sdmmc *host, struct
> > +mmc_request *mrq) {
> > + struct mmc_command *cmd = mrq->cmd;
> > + struct mmc_data *data = mrq->data;
> > +
> > + if (!mmc_op_multi(cmd->opcode))
> > + return 0;
> > +
> > + if (host->prev_dir != host->cur_dir)
> > + return 0;
> > +
> > + if ((host->prev_sec_addr + host->prev_sec_cnt) != data->blk_addr)
> > + return 0;
> > +
> > + return 1;
> > +}
> > +
> > static void sd_request(struct work_struct *work) {
> > struct realtek_pci_sdmmc *host = container_of(work, @@ -841,12
> > +984,36 @@ static void sd_request(struct work_struct *work)
> > if (!data_size) {
> > sd_send_cmd_get_rsp(host, cmd);
> > } else if (sd_rw_cmd(cmd) || sdio_extblock_cmd(cmd, data)) {
> > - cmd->error = sd_rw_multi(host, mrq);
> > - if (!host->using_cookie)
> > - sdmmc_post_req(host->mmc, host->mrq, 0);
> > + /* Check multi-block and seq function*/
> > + if (data->flags & MMC_DATA_READ)
> > + host->cur_dir = DMA_DIR_FROM_CARD;
> > + else
> > + host->cur_dir = DMA_DIR_TO_CARD;
> > +
> > + if (host->rw_mode == SEQ_RW) {
> > + cancel_delayed_work(&host->rw_idle_work);
> > + if (!sd_check_multi_seq(host, mrq)) {
> > + sd_stop_rw_multi_seq(host, mrq);
> > + host->rw_mode = NORMAL_RW;
> > + }
> > + }
> > +
> > + if (host->rw_mode == SEQ_RW)
> > + cmd->error = sd_rw_multi_seq(host, mrq);
> > + else {
> > + if (mmc_op_multi(cmd->opcode))
> > + host->rw_mode = SEQ_RW;
> > + cmd->error = sd_rw_multi(host, mrq);
> > + if (!host->using_cookie)
> > + sdmmc_post_req(host->mmc,
> host->mrq, 0);
> > + }
> > +
> > + if (cmd->error)
> > + host->rw_mode = NORMAL_RW;
> > +
> > + if (mmc_op_multi(cmd->opcode) && host->rw_mode ==
> SEQ_RW)
> > + mod_delayed_work(system_wq,
> > + &host->rw_idle_work, msecs_to_jiffies(150));
> >
> > - if (mmc_op_multi(cmd->opcode) && mrq->stop)
> > - sd_send_cmd_get_rsp(host, mrq->stop);
> > } else {
> > sd_normal_rw(host, mrq);
> > }
> > @@ -867,6 +1034,11 @@ static void sd_request(struct work_struct *work)
> > }
> >
> > mutex_lock(&host->host_mutex);
> > + if (sd_rw_cmd(cmd) || sdio_extblock_cmd(cmd, data)) {
> > + host->prev_dir = host->cur_dir;
> > + host->prev_sec_addr = data->blk_addr;
> > + host->prev_sec_cnt = data->blocks;
> > + }
> > host->mrq = NULL;
> > mutex_unlock(&host->host_mutex);
> >
> > @@ -1457,6 +1629,7 @@ static void rtsx_pci_sdmmc_card_event(struct
> platform_device *pdev)
> > struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
> >
> > host->cookie = -1;
> > + host->rw_mode = NORMAL_RW;
> > mmc_detect_change(host->mmc, 0); }
> >
> > @@ -1487,6 +1660,7 @@ static int rtsx_pci_sdmmc_drv_probe(struct
> platform_device *pdev)
> > host->cookie = -1;
> > host->power_state = SDMMC_POWER_OFF;
> > INIT_WORK(&host->work, sd_request);
> > + INIT_DELAYED_WORK(&host->rw_idle_work, sd_rw_idle_work);
> > platform_set_drvdata(pdev, host);
> > pcr->slots[RTSX_SD_CARD].p_dev = pdev;
> > pcr->slots[RTSX_SD_CARD].card_event =
> > rtsx_pci_sdmmc_card_event; @@ -1526,6 +1700,7 @@ static int
> rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
> > pm_runtime_disable(&pdev->dev);
> > }
> >
> > + cancel_delayed_work_sync(&host->rw_idle_work);
> > cancel_work_sync(&host->work);
> >
> > mutex_lock(&host->host_mutex);
> > --
> > 2.25.1
> ------Please consider the environment before printing this e-mail.
Powered by blists - more mailing lists