| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211227151333.414376646@linuxfoundation.org>
Date: Mon, 27 Dec 2021 16:30:32 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Josh Lehan <krellan@...gle.com>,
Guenter Roeck <linux@...ck-us.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.15 057/128] hwmon: (lm90) Drop critical attribute support for MAX6654
From: Guenter Roeck <linux@...ck-us.net>
[ Upstream commit 16ba51b5dcd3f6dde2e51d5ccc86313119dcf889 ]
Tests with a real chip and a closer look into the datasheet show that
MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support
of the respective attributes for this chip.
Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit
attributes to solve the problem.
Cc: Josh Lehan <krellan@...gle.com>
Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver")
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/hwmon/lm90.c | 86 +++++++++++++++++++++++++-------------------
1 file changed, 49 insertions(+), 37 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 72969ea83d82e..6597d055e09d8 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -35,13 +35,14 @@
* explicitly as max6659, or if its address is not 0x4c.
* These chips lack the remote temperature offset feature.
*
- * This driver also supports the MAX6654 chip made by Maxim. This chip can
- * be at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is
- * otherwise similar to MAX6657/MAX6658/MAX6659. Extended range is available
- * by setting the configuration register accordingly, and is done during
- * initialization. Extended precision is only available at conversion rates
- * of 1 Hz and slower. Note that extended precision is not enabled by
- * default, as this driver initializes all chips to 2 Hz by design.
+ * This driver also supports the MAX6654 chip made by Maxim. This chip can be
+ * at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is similar
+ * to MAX6657/MAX6658/MAX6659, but does not support critical temperature
+ * limits. Extended range is available by setting the configuration register
+ * accordingly, and is done during initialization. Extended precision is only
+ * available at conversion rates of 1 Hz and slower. Note that extended
+ * precision is not enabled by default, as this driver initializes all chips
+ * to 2 Hz by design.
*
* This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
* MAX6692 chips made by Maxim. These are again similar to the LM86,
@@ -188,6 +189,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
#define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */
#define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/
#define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */
+#define LM90_HAVE_CRIT (1 << 10)/* Chip supports CRIT/OVERT register */
/* LM90 status */
#define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */
@@ -354,38 +356,43 @@ struct lm90_params {
static const struct lm90_params lm90_params[] = {
[adm1032] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
[adt7461] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
+ | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
[g781] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 8,
},
[lm86] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_CRIT,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[lm90] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_CRIT,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[lm99] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_CRIT,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[max6646] = {
+ .flags = LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
@@ -396,50 +403,50 @@ static const struct lm90_params lm90_params[] = {
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
[max6657] = {
- .flags = LM90_PAUSE_FOR_CONFIG,
+ .flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
[max6659] = {
- .flags = LM90_HAVE_EMERGENCY,
+ .flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
[max6680] = {
- .flags = LM90_HAVE_OFFSET,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
[max6696] = {
.flags = LM90_HAVE_EMERGENCY
- | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3,
+ | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT,
.alert_alarms = 0x1c7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
[w83l771] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 8,
},
[sa56004] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT,
.alert_alarms = 0x7b,
.max_convrate = 9,
.reg_local_ext = SA56004_REG_R_LOCAL_TEMPL,
},
[tmp451] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 9,
.reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
},
[tmp461] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT,
.alert_alarms = 0x7c,
.max_convrate = 9,
.reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
@@ -668,20 +675,22 @@ static int lm90_update_limits(struct device *dev)
struct i2c_client *client = data->client;
int val;
- val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT);
- if (val < 0)
- return val;
- data->temp8[LOCAL_CRIT] = val;
+ if (data->flags & LM90_HAVE_CRIT) {
+ val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT);
+ if (val < 0)
+ return val;
+ data->temp8[LOCAL_CRIT] = val;
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT);
- if (val < 0)
- return val;
- data->temp8[REMOTE_CRIT] = val;
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT);
+ if (val < 0)
+ return val;
+ data->temp8[REMOTE_CRIT] = val;
- val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST);
- if (val < 0)
- return val;
- data->temp_hyst = val;
+ val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST);
+ if (val < 0)
+ return val;
+ data->temp_hyst = val;
+ }
val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH);
if (val < 0)
@@ -1902,11 +1911,14 @@ static int lm90_probe(struct i2c_client *client)
info->config = data->channel_config;
data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
- HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
- HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM;
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM;
data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
- HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
- HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT;
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_FAULT;
+
+ if (data->flags & LM90_HAVE_CRIT) {
+ data->channel_config[0] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST;
+ data->channel_config[1] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST;
+ }
if (data->flags & LM90_HAVE_OFFSET)
data->channel_config[1] |= HWMON_T_OFFSET;
--
2.34.1
Powered by blists - more mailing lists