[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <PH7PR19MB5562E60AFDA5416F50376924A0449@PH7PR19MB5562.namprd19.prod.outlook.com>
Date: Wed, 29 Dec 2021 10:49:37 +0000
From: Li Chen <lchen@...arella.com>
To: Kishon Vijay Abraham I <kishon@...com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Krzysztof Wilczyński <kw@...ux.com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] misc: pci_endpoint_test: fix misuse of COMMAND_READ/WRITE
Sorry, I misunderstood the two functions. pci_endpoint_test_write has fulfilled orig_addr, which is used to dma_map_single. So it ask the device to read from the dma address, and **writes** to its own dma address/buf.
Pls ignore this patch, thanks.
> -----Original Message-----
> From: Li Chen
> Sent: Wednesday, December 29, 2021 2:07 PM
> To: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd
> Bergmann; Greg Kroah-Hartman; linux-pci@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Subject: [PATCH] misc: pci_endpoint_test: fix misuse of
> COMMAND_READ/WRITE
>
> IIUC, COMMAND_WRITE should be set for pci_endpoint_test_write,
> and COMMAND_READ should be set for pci_endpoint_test_read.
>
> Signed-off-by: Li Chen <lchen@...arella.com>
> ---
> drivers/misc/pci_endpoint_test.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
> index 2ed7e3aaff3a8..ea7a90830932d 100644
> --- a/drivers/misc/pci_endpoint_test.c
> +++ b/drivers/misc/pci_endpoint_test.c
> @@ -551,12 +551,12 @@ static bool pci_endpoint_test_write(struct
> pci_endpoint_test *test,
> pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
> irq_type);
> pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
> pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
> - COMMAND_READ);
> + COMMAND_WRITE);
>
> wait_for_completion(&test->irq_raised);
>
> reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
> - if (reg & STATUS_READ_SUCCESS)
> + if (reg & STATUS_WRITE_SUCCESS)
> ret = true;
>
> dma_unmap_single(dev, orig_phys_addr, size + alignment,
> @@ -643,7 +643,7 @@ static bool pci_endpoint_test_read(struct
> pci_endpoint_test *test,
> pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
> irq_type);
> pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
> pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
> - COMMAND_WRITE);
> + COMMAND_READ);
>
> wait_for_completion(&test->irq_raised);
>
> --
> 2.34.1
Regards,
Li
**********************************************************************
This email and attachments contain Ambarella Proprietary and/or Confidential Information and is intended solely for the use of the individual(s) to whom it is addressed. Any unauthorized review, use, disclosure, distribute, copy, or print is prohibited. If you are not an intended recipient, please contact the sender by reply email and destroy all copies of the original message. Thank you.
Powered by blists - more mailing lists