linux-kernel - Re: [PATCH v6] sun4i-emac.c: add dma support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:   Sun, 2 Jan 2022 18:38:51 +0100
From:   Corentin Labbe <clabbe.montjoie@...il.com>
To:     Conley Lee <conleylee@...mail.com>
Cc:     davem@...emloft.net, kuba@...nel.org, mripard@...nel.org,
        wens@...e.org, netdev@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...ts.linux.dev, jernej.skrabec@...il.com
Subject: Re: [PATCH v6] sun4i-emac.c: add dma support

Le Sat, Jan 01, 2022 at 03:09:01PM +0800, Conley Lee a écrit :
> On 12/31/21 at 11:43上午, Corentin Labbe wrote:
> > Date: Fri, 31 Dec 2021 11:43:53 +0100
> > From: Corentin Labbe <clabbe.montjoie@...il.com>
> > To: conleylee@...mail.com
> > Cc: davem@...emloft.net, kuba@...nel.org, mripard@...nel.org,
> >  wens@...e.org, netdev@...r.kernel.org,
> >  linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
> > Subject: Re: [PATCH v6] sun4i-emac.c: add dma support
> > 
> > Le Wed, Dec 29, 2021 at 09:43:51AM +0800, conleylee@...mail.com a écrit :
> > > From: Conley Lee <conleylee@...mail.com>
> > > 
> > > Thanks for your review. Here is the new version for this patch.
> > > 
> > > This patch adds support for the emac rx dma present on sun4i. The emac
> > > is able to move packets from rx fifo to RAM by using dma.
> > > 
> > > Change since v4.
> > >   - rename sbk field to skb
> > >   - rename alloc_emac_dma_req to emac_alloc_dma_req
> > >   - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid
> > >     sleeping
> > >   - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails
> > >   - fix some code style issues 
> > > 
> > > Change since v5.
> > >   - fix some code style issue
> > > 
> > 
> > Hello
> > 
> > I just tested this on a sun4i-a10-olinuxino-lime
> > 
> > I got:
> > [    2.922812] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): get io resource from device: 0x1c0b000, size = 4096
> > [    2.934512] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): failed to request dma channel. dma is disabled
> > [    2.945740] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): configure dma failed. disable dma.
> > [    2.957887] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 19 MAC: 02:49:09:40:ab:3d
> > 
> > On which board did you test it and how ?
> > 
> > Regards
> 
> Sorry. I sent the email with text/html format. This email is an clean version.
> 
> In order to enable dma rx channel. `dmas` and `dma-names` properties
> should be added to emac section in dts:
> 
> emac: ethernet@...b000 {
> 	...
> 	dmas = <&dma SUN4I_DMA_DEDICATED 7>;
> 	dma-names = "rx";
> 	...
> }

Helo

Yes I figured that out. But you should have done a patch serie adding this.
Your patch is now applied but it is a useless change without the dtb change.
You should also probably update the driver binding (Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml) since you add new members to DT node.

Furthermore, why did you add RX only and not TX dma also ?

Probably it is too late since patch is applied but it is:
Tested-by: Corentin Labbe <clabbe.montjoie@...il.com>
Tested-on: sun4i-a10-olinuxino-lime

Regards