| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1641208380-15510-2-git-send-email-quic_srivasam@quicinc.com>
Date: Mon, 3 Jan 2022 16:42:58 +0530
From: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<robh+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<rohitkr@...eaurora.org>, <srinivas.kandagatla@...aro.org>,
<dianders@...omium.org>, <swboyd@...omium.org>,
<judyhsiao@...omium.org>
CC: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
"Venkata Prasad Potturu" <quic_potturu@...cinc.com>
Subject: [PATCH v2 1/3] arm64: dts: qcom: sc7280: Add nodes for va tx and rx macros and external codecs
SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
codecs like WCD938x, max98360a using soundwire masters and i2s bus.
Add these nodes for sc7280 based platforms audio use case.
Add tlmm gpio property in wcd938x node for switching CTIA/OMTP Headset.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
---
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 4 ++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 52 ++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 113 +++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index cd2755c..035cca9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -72,6 +72,10 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
+&wcd938x {
+ qcom,us-euro-gpios = <&tlmm 81 0>;
+};
+
&tlmm {
tp_int_odl: tp-int-odl {
pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ddeb508..94614c9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -636,3 +636,55 @@
bias-pull-up;
};
};
+
+&swr0 {
+ wcd_rx: wcd938x-rx{
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ wcd_tx: wcd938x-tx{
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
+&soc {
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ wcd938x: codec {
+ compatible = "qcom,wcd9380-codec";
+ #sound-dai-cells = <1>;
+
+ reset-gpios = <&tlmm 83 0>;
+
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 6233f2c..c0d9de3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1744,6 +1744,119 @@
#clock-cells = <1>;
};
+ rxmacro: rxmacro@...0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rx_swr_active>;
+ compatible = "qcom,sc7280-lpass-rx-macro";
+ reg = <0 0x3200000 0 0x1000>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&vamacro>;
+ clock-names = "mclk", "npl", "fsgen";
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ /* rx macro */
+ swr0: soundwire-controller@...0000 {
+ reg = <0 0x3210000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.6.0";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rxmacro>;
+ clock-names = "iface";
+ label = "RX";
+
+ qcom,din-ports = <0>;
+ qcom,dout-ports = <5>;
+ qcom,swrm-hctl-reg = <0x032a90a0>;
+
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
+ qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3F 0x1F 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
+ qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
+ qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
+ qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ txmacro: txmacro@...0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tx_swr_active>;
+ compatible = "qcom,sc7280-lpass-tx-macro";
+ reg = <0 0x3220000 0 0x1000>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&vamacro>;
+ clock-names = "mclk", "npl", "fsgen";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #sound-dai-cells = <1>;
+ };
+
+ /* tx macro */
+ swr1: soundwire-controller@...0000 {
+ reg = <0 0x3230000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.6.0";
+
+ interrupts-extended =
+ <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "swr_master_irq", "swr_wake_irq";
+ clocks = <&txmacro>;
+ clock-names = "iface";
+ label = "TX";
+
+ qcom,din-ports = <3>;
+ qcom,dout-ports = <0>;
+ qcom,swrm-hctl-reg = <0x032a90a8>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF>;
+ qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF>;
+ qcom,ports-word-length = /bits/ 8 <0xFF 0x0 0xFF>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF>;
+ qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF>;
+ qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>;
+ qcom,port-offset = <1>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ vamacro: codec@...0000 {
+ compatible = "qcom,sc7280-lpass-va-macro";
+ pinctrl-0 = <&dmic01_active>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_bob>;
+ reg = <0 0x3370000 0 0x1000>;
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_RX_MCLK_CLK>;
+ clock-names = "mclk", "macro";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "fsgen";
+ #sound-dai-cells = <1>;
+ };
+
lpass_tlmm: pinctrl@...0000 {
compatible = "qcom,sc7280-lpass-lpi-pinctrl";
reg = <0 0x33c0000 0x0 0x20000>,
--
2.7.4
Powered by blists - more mailing lists