linux-kernel - Re: [PATCH V3 5/7] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAA8EJpo-pLbWH3t0MN-pV0RV=0+wt47qcU3oDbaXcDG1NQq6ow@mail.gmail.com>
Date:   Tue, 4 Jan 2022 22:24:03 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Souradeep Chowdhury <quic_schowdhu@...cinc.com>
Cc:     linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
        devicetree@...r.kernel.org, pure.logic@...us-software.ie,
        bjorn.andersson@...aro.org, greg@...ah.com,
        linux-kernel@...r.kernel.org, tsoni@...eaurora.org,
        psodagud@...eaurora.org, satyap@...eaurora.org,
        pheragu@...eaurora.org, rnayak@...eaurora.org,
        sibis@...eaurora.org, saiprakash.ranjan@...eaurora.org
Subject: Re: [PATCH V3 5/7] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

On Tue, 4 Jan 2022 at 15:00, Souradeep Chowdhury
<quic_schowdhu@...cinc.com> wrote:
>
> Add the Embedded USB Debugger(EUD) device tree node. The
> node contains EUD base register region and EUD mode
> manager register regions along with the interrupt entry.
> Also add the connector to EUD which is mapped as the child
> of dwc3. The connector is attached to EUD via port. Also add
> the role-switch property to dwc3 node.
>
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 53a21d0..2d14e5c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1315,6 +1315,18 @@
>                                 phys = <&usb_2_hsphy>;
>                                 phy-names = "usb2-phy";
>                                 maximum-speed = "high-speed";
> +                               usb-role-switch;
> +                               usb_con: eud_usb_connector {

Is this node meant to be named connector instead?

> +                                       compatible = "qcom,usb-connector-eud",
> +                                                    "usb-c-connector";
> +                                       ports {
> +                                               port@0 {
> +                                                       usb2_role_switch: endpoint {
> +                                                               remote-endpoint = <&eud_ep>;
> +                                                       };
> +                                               };
> +                                       };
> +                               };
>                         };
>                 };
>
> @@ -1339,6 +1351,19 @@
>                         interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>                 };
>
> +               eud:  eud@...0000 {
> +                       compatible = "qcom,sc7280-eud","qcom,eud";
> +                       reg = <0 0x88e0000 0 0x2000>,
> +                             <0 0x88e2000 0 0x1000>;
> +                       interrupt-parent = <&pdc>;
> +                       interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> +                       port {
> +                               eud_ep: endpoint {
> +                                       remote-endpoint = <&usb2_role_switch>;
> +                               };
> +                       };
> +               };
> +
>                 nsp_noc: interconnect@...0000 {
>                         reg = <0 0x0a0c0000 0 0x10000>;
>                         compatible = "qcom,sc7280-nsp-noc";
> --
> 2.7.4
>


-- 
With best wishes
Dmitry