| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220104072658.69756-10-marcan@marcan.st>
Date: Tue, 4 Jan 2022 16:26:32 +0900
From: Hector Martin <marcan@...can.st>
To: Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Len Brown <lenb@...nel.org>,
Arend van Spriel <aspriel@...il.com>,
Franky Lin <franky.lin@...adcom.com>,
Hante Meuleman <hante.meuleman@...adcom.com>,
Chi-hsien Lin <chi-hsien.lin@...ineon.com>,
Wright Feng <wright.feng@...ineon.com>,
Dmitry Osipenko <digetx@...il.com>
Cc: Hector Martin <marcan@...can.st>, Sven Peter <sven@...npeter.dev>,
Alyssa Rosenzweig <alyssa@...enzweig.io>,
Mark Kettenis <kettenis@...nbsd.org>,
Rafał Miłecki <zajec5@...il.com>,
Pieter-Paul Giesberts <pieter-paul.giesberts@...adcom.com>,
Linus Walleij <linus.walleij@...aro.org>,
Hans de Goede <hdegoede@...hat.com>,
"John W. Linville" <linville@...driver.com>,
"brian m. carlson" <sandals@...stytoothpaste.net>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-acpi@...r.kernel.org, brcm80211-dev-list.pdl@...adcom.com,
SHA-cyfmac-dev-list@...ineon.com
Subject: [PATCH v2 09/35] brcmfmac: pcie: Perform firmware selection for Apple platforms
On Apple platforms, firmware selection uses the following elements:
Property Example Source
============== ======= ========================
* Chip name 4378 Device ID
* Chip revision B1 OTP
* Platform shikoku DT (ARM64) or ACPI (x86)
* Module type RASP OTP
* Module vendor m OTP
* Module version 6.11 OTP
* Antenna SKU X3 DT (ARM64) or ACPI (x86)
In macOS, these firmwares are stored using filenames in this format
under /usr/share/firmware/wifi:
C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt
To prepare firmwares for Linux, we rename these to a scheme following
the existing brcmfmac convention:
brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\
<mod_vendor>-<mod_version>-<antenna_sku>.txt
The NVRAM uses all the components, while the firmware and CLM blob only
use the chip/revision/platform/antenna_sku:
brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin
e.g.
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin
In addition, since there are over 1000 files in total, many of which are
symlinks or outright duplicates, we deduplicate and prune the firmware
tree to reduce firmware filenames to fewer dimensions. For example, the
shikoku platform (MacBook Air M1 2020) simplifies to just 4 files:
brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob
brcm/brcmfmac4378b1-pcie.apple,shikoku.bin
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt
This reduces the total file count to around 170, of which 75 are
symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and
61 NVRAM config files. We also slightly process NVRAM files to correct
some formatting issues.
To handle this, the driver must try the following path formats when
looking for firmware files:
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt *
brcm/brcmfmac4378b1-pcie.apple,shikoku.txt
* Not relevant for NVRAM, only for firmware/CLM.
The chip revision nominally comes from OTP on Apple platforms, but it
can be mapped to the PCI revision number, so we ignore the OTP revision
and continue to use the existing PCI revision mechanism to identify chip
revisions, as the driver already does for other chips. Unfortunately,
the mapping is not consistent between different chip types, so this has
to be determined experimentally.
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Hector Martin <marcan@...can.st>
---
.../broadcom/brcm80211/brcmfmac/pcie.c | 58 ++++++++++++++++++-
1 file changed, 56 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 74c9a4f74813..250e0bd40cb3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -2094,8 +2094,62 @@ brcmf_pcie_prepare_fw_request(struct brcmf_pciedev_info *devinfo)
fwreq->domain_nr = pci_domain_nr(devinfo->pdev->bus) + 1;
fwreq->bus_nr = devinfo->pdev->bus->number;
- brcmf_dbg(PCIE, "Board: %s\n", devinfo->settings->board_type);
- fwreq->board_types[0] = devinfo->settings->board_type;
+ /* Apple platforms with fancy firmware/NVRAM selection */
+ if (devinfo->settings->board_type &&
+ devinfo->settings->antenna_sku &&
+ devinfo->otp.valid) {
+ char *buf;
+ int len;
+
+ brcmf_dbg(PCIE, "Apple board: %s\n",
+ devinfo->settings->board_type);
+
+ /* Example: apple,shikoku-RASP-m-6.11-X3 */
+ len = (strlen(devinfo->settings->board_type) + 1 +
+ strlen(devinfo->otp.module) + 1 +
+ strlen(devinfo->otp.vendor) + 1 +
+ strlen(devinfo->otp.version) + 1 +
+ strlen(devinfo->settings->antenna_sku) + 1);
+
+ /* apple,shikoku */
+ fwreq->board_types[5] = devinfo->settings->board_type;
+
+ buf = devm_kzalloc(&devinfo->pdev->dev, len, GFP_KERNEL);
+
+ strscpy(buf, devinfo->settings->board_type, len);
+ strlcat(buf, "-", len);
+ strlcat(buf, devinfo->settings->antenna_sku, len);
+ /* apple,shikoku-X3 */
+ fwreq->board_types[4] = devm_kstrdup(&devinfo->pdev->dev, buf,
+ GFP_KERNEL);
+
+ strscpy(buf, devinfo->settings->board_type, len);
+ strlcat(buf, "-", len);
+ strlcat(buf, devinfo->otp.module, len);
+ /* apple,shikoku-RASP */
+ fwreq->board_types[3] = devm_kstrdup(&devinfo->pdev->dev, buf,
+ GFP_KERNEL);
+
+ strlcat(buf, "-", len);
+ strlcat(buf, devinfo->otp.vendor, len);
+ /* apple,shikoku-RASP-m */
+ fwreq->board_types[2] = devm_kstrdup(&devinfo->pdev->dev, buf,
+ GFP_KERNEL);
+
+ strlcat(buf, "-", len);
+ strlcat(buf, devinfo->otp.version, len);
+ /* apple,shikoku-RASP-m-6.11 */
+ fwreq->board_types[1] = devm_kstrdup(&devinfo->pdev->dev, buf,
+ GFP_KERNEL);
+
+ strlcat(buf, "-", len);
+ strlcat(buf, devinfo->settings->antenna_sku, len);
+ /* apple,shikoku-RASP-m-6.11-X3 */
+ fwreq->board_types[0] = buf;
+ } else {
+ brcmf_dbg(PCIE, "Board: %s\n", devinfo->settings->board_type);
+ fwreq->board_types[0] = devinfo->settings->board_type;
+ }
return fwreq;
}
--
2.33.0
Powered by blists - more mailing lists