| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fa637b7a-c85b-6287-87ac-cf518b59d027@intel.com>
Date: Wed, 5 Jan 2022 10:31:15 +0100
From: Andrzej Hajda <andrzej.hajda@...el.com>
To: Xin Ji <xji@...logixsemi.com>, <a.hajda@...sung.com>,
<narmstrong@...libre.com>, <dan.carpenter@...cle.com>,
<robert.foss@...aro.org>, <Laurent.pinchart@...asonboard.com>,
<jonas@...boo.se>, <jernej.skrabec@...il.com>, <airlied@...ux.ie>,
<daniel@...ll.ch>, <sam@...nborg.org>, <pihsun@...omium.org>,
<tzungbi@...gle.com>, <maxime@...no.tech>, <drinkcat@...gle.com>,
<hsinyi@...omium.org>, <dri-devel@...ts.freedesktop.org>,
<linux-kernel@...r.kernel.org>, <bliang@...logixsemi.com>,
<qwen@...logixsemi.com>
Subject: Re: [PATCH 1/2] drm/bridge: anx7625: add HDCP support
Hi Xin,
On 09.11.2021 03:42, Xin Ji wrote:
> This patch provides HDCP setting interface for userspace to dynamic
> enable/disable HDCP function.
>
> Signed-off-by: Xin Ji <xji@...logixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 368 +++++++++++++++++++++-
> drivers/gpu/drm/bridge/analogix/anx7625.h | 69 +++-
> 2 files changed, 425 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 001fb39d9919..6d93026c2999 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -26,6 +26,7 @@
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_dp_helper.h>
> #include <drm/drm_edid.h>
> +#include <drm/drm_hdcp.h>
> #include <drm/drm_mipi_dsi.h>
> #include <drm/drm_of.h>
> #include <drm/drm_panel.h>
> @@ -213,6 +214,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> return 0;
> }
>
> +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> + u8 addrh, u8 addrm, u8 addrl,
Wouldn't be more convenient to use single u32 address (in fact 24 bits
of it)?
> + u8 len, u8 *buf)
> +{
> + struct device *dev = &ctx->client->dev;
> + int ret;
> + u8 cmd;
> +
> + if (len > MAX_DPCD_BUFFER_SIZE) {
> + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
Here and below (note from inline docs)m regarding DRM_DEV_ERROR and friends:
NOTE: this is deprecated in favor of drm_err() or dev_err()
> + return -EINVAL;
> + }
> +
> + cmd = ((len - 1) << 4) | 0x09;
Here and below you can replace magic numbers by macros.
> +
> + /* Set command and length */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_COMMAND, cmd);
> +
> + /* Set aux access address */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_7_0, addrl);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_15_8, addrm);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_19_16, addrh);
> +
> + /* Enable aux access */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> +
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> + return -EIO;
> + }
> +
> + usleep_range(2000, 2100);
> +
> + ret = wait_aux_op_finish(ctx);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_BUFF_START, len, buf);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> static int anx7625_video_mute_control(struct anx7625_data *ctx,
> u8 status)
> {
> @@ -669,6 +724,160 @@ static int anx7625_dpi_config(struct anx7625_data *ctx)
> return ret;
> }
>
> +static int anx7625_read_flash_status(struct anx7625_data *ctx)
> +{
> + return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, R_RAM_CTRL);
> +}
> +
> +static int anx7625_hdcp_key_probe(struct anx7625_data *ctx)
> +{
> + int ret, val;
> + struct device *dev = &ctx->client->dev;
> + u8 ident[32];
> +
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_ADDR_HIGH, 0x91);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_ADDR_LOW, 0xA0);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : set key flash address.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_LEN_HIGH, (FLASH_BUF_LEN - 1) >> 8);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_LEN_LOW, (FLASH_BUF_LEN - 1) & 0xFF);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : set key flash len.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_FLASH_RW_CTRL, FLASH_READ);
> + ret |= readx_poll_timeout(anx7625_read_flash_status,
> + ctx, val,
> + ((val & FLASH_DONE) || (val < 0)),
> + 2000,
> + 2000 * 150);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "flash read access fail!\n");
> + return -EIO;
> + }
> +
> + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> + FLASH_BUF_BASE_ADDR,
> + FLASH_BUF_LEN, ident);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "read flash data fail!\n");
> + return -EIO;
> + }
> +
> + if (ident[29] == 0xFF && ident[30] == 0xFF && ident[31] == 0xFF)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int anx7625_hdcp_key_load(struct anx7625_data *ctx)
> +{
> + int ret;
> + struct device *dev = &ctx->client->dev;
> +
> + /* Select HDCP 1.4 KEY */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_BOOT_RETRY, 0x12);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_ADDR_HIGH, HDCP14KEY_START_ADDR >> 8);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_ADDR_LOW, HDCP14KEY_START_ADDR & 0xFF);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_RAM_LEN_H, HDCP14KEY_SIZE >> 12);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_RAM_LEN_L, HDCP14KEY_SIZE >> 4);
> +
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_RAM_ADDR_H, 0);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_RAM_ADDR_L, 0);
> + /* Enable HDCP 1.4 KEY load */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_RAM_CTRL, DECRYPT_EN | LOAD_START);
> + DRM_DEV_DEBUG_DRIVER(dev, "load HDCP 1.4 key done\n");
> + return ret;
> +}
> +
> +static int anx7625_hdcp_config(struct anx7625_data *ctx, bool on)
> +{
> + u8 bcap;
> + int ret;
> + struct device *dev = &ctx->client->dev;
> +
> + if (!on) {
> + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP 1.4\n");
> +
> + /* Disable HDCP */
> + ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
> + /* Try auth flag */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> + /* Interrupt for DRM */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "fail to disable HDCP\n");
> +
> + return anx7625_write_and(ctx, ctx->i2c.tx_p0_client,
> + TX_HDCP_CTRL0, ~HARD_AUTH_EN & 0xFF);
> + }
Code path for on==true, and on==false have nothing common.
This is definitely shows that anx7625_hdcp_config should be split to
anx7625_hdcp_enable and anx7625_hdcp_disable (or on/off, whatever).
> +
> + ret = anx7625_hdcp_key_probe(ctx);
> + if (ret) {
> + DRM_DEV_DEBUG_DRIVER(dev, "no key found, not to do hdcp\n");
> + return ret;
> + }
> +
> + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> + if (!(bcap & 0x01)) {
> + DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
> + return 0;
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> +
> + /* First clear HDCP state */
> + ret = anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
> + TX_HDCP_CTRL0,
> + KSVLIST_VLD | BKSV_SRM_PASS | RE_AUTHEN);
> + usleep_range(1000, 1100);
> + /* Second clear HDCP state */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
> + TX_HDCP_CTRL0,
> + KSVLIST_VLD | BKSV_SRM_PASS | RE_AUTHEN);
> +
> + /* Set time for waiting KSVR */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
> + SP_TX_WAIT_KSVR_TIME, 0xc8);
> + /* Set time for waiting R0 */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
> + SP_TX_WAIT_R0_TIME, 0xb0);
> + ret |= anx7625_hdcp_key_load(ctx);
> + if (ret) {
> + DRM_WARN("prepare HDCP key failed.\n");
> + return ret;
> + }
> +
> + ret = anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> +
> + /* Try auth flag */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> + /* Interrupt for DRM */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "fail to enable HDCP\n");
> +
> + return anx7625_write_or(ctx, ctx->i2c.tx_p0_client,
> + TX_HDCP_CTRL0, HARD_AUTH_EN);
> +}
> +
> static void anx7625_dp_start(struct anx7625_data *ctx)
> {
> int ret;
> @@ -679,6 +888,9 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> return;
> }
>
> + /* Disable HDCP */
> + anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
> +
> if (ctx->pdata.is_dpi)
> ret = anx7625_dpi_config(ctx);
> else
> @@ -686,6 +898,10 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
>
> if (ret < 0)
> DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
> +
> + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
> +
> + ctx->dp_en = 1;
> }
>
> static void anx7625_dp_stop(struct anx7625_data *ctx)
> @@ -705,6 +921,10 @@ static void anx7625_dp_stop(struct anx7625_data *ctx)
> ret |= anx7625_video_mute_control(ctx, 1);
> if (ret < 0)
> DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
> +
> + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
> +
> + ctx->dp_en = 0;
> }
>
> static int sp_tx_rst_aux(struct anx7625_data *ctx)
> @@ -859,7 +1079,7 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
> AP_AUX_ADDR_7_0, 0x50);
> ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> AP_AUX_ADDR_15_8, 0);
> - ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> AP_AUX_ADDR_19_16, 0xf0);
This is bugfix? How it is related to the rest of patchset.
Regards
Andrzej
> if (ret < 0) {
> DRM_DEV_ERROR(dev, "access aux channel IO error.\n");
> @@ -1688,6 +1908,83 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> return 0;
> }
>
> +void hdcp_check_work_func(struct work_struct *work)
> +{
> + u8 status;
> + struct delayed_work *dwork;
> + struct anx7625_data *ctx;
> + struct device *dev;
> + struct drm_device *drm_dev;
> +
> + dwork = to_delayed_work(work);
> + ctx = container_of(dwork, struct anx7625_data, hdcp_work);
> + dev = &ctx->client->dev;
> +
> + if (!ctx->connector) {
> + DRM_ERROR("HDCP connector is null!");
> + return;
> + }
> +
> + drm_dev = ctx->connector->dev;
> + drm_modeset_lock(&drm_dev->mode_config.connection_mutex, NULL);
> + mutex_lock(&ctx->hdcp_wq_lock);
> +
> + status = anx7625_reg_read(ctx, ctx->i2c.tx_p0_client, 0);
> + DRM_DEV_DEBUG_DRIVER(dev, "sink HDCP status check: %.02x\n", status);
> + if (status & BIT(1)) {
> + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_ENABLED;
> + drm_hdcp_update_content_protection(ctx->connector,
> + ctx->hdcp_cp);
> + DRM_DEV_DEBUG_DRIVER(dev, "update CP to ENABLE\n");
> + }
> +
> + mutex_unlock(&ctx->hdcp_wq_lock);
> + drm_modeset_unlock(&drm_dev->mode_config.connection_mutex);
> +}
> +
> +static int anx7625_connector_atomic_check(struct anx7625_data *ctx,
> + struct drm_connector_state *state)
> +{
> + struct device *dev = &ctx->client->dev;
> + int cp;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "hdcp state check\n");
> + cp = state->content_protection;
> +
> + if (cp == ctx->hdcp_cp)
> + return 0;
> +
> + if (cp == DRM_MODE_CONTENT_PROTECTION_DESIRED) {
> + if (ctx->dp_en) {
> + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP\n");
> + anx7625_hdcp_config(ctx, true);
> +
> + queue_delayed_work(ctx->hdcp_workqueue,
> + &ctx->hdcp_work,
> + msecs_to_jiffies(2000));
> + }
> + }
> +
> + if (cp == DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
> + if (ctx->hdcp_cp != DRM_MODE_CONTENT_PROTECTION_ENABLED) {
> + DRM_ERROR("current CP is not ENABLED\n");
> + return -EINVAL;
> + }
> + anx7625_hdcp_config(ctx, false);
> + ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
> + drm_hdcp_update_content_protection(ctx->connector,
> + ctx->hdcp_cp);
> + DRM_DEV_DEBUG_DRIVER(dev, "update CP to UNDESIRE\n");
> + }
> +
> + if (cp == DRM_MODE_CONTENT_PROTECTION_ENABLED) {
> + DRM_ERROR("Userspace illegal set to PROTECTION ENABLE\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int anx7625_bridge_attach(struct drm_bridge *bridge,
> enum drm_bridge_attach_flags flags)
> {
> @@ -1902,25 +2199,58 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
> return true;
> }
>
> -static void anx7625_bridge_enable(struct drm_bridge *bridge)
> +static int anx7625_bridge_atomic_check(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> {
> struct anx7625_data *ctx = bridge_to_anx7625(bridge);
> struct device *dev = &ctx->client->dev;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "drm enable\n");
> + DRM_DEV_DEBUG_DRIVER(dev, "drm bridge atomic check\n");
> + anx7625_bridge_mode_fixup(bridge, &crtc_state->mode,
> + &crtc_state->adjusted_mode);
> +
> + return anx7625_connector_atomic_check(ctx, conn_state);
> +}
> +
> +static void anx7625_bridge_atomic_enable(struct drm_bridge *bridge,
> + struct drm_bridge_state *state)
> +{
> + struct anx7625_data *ctx = bridge_to_anx7625(bridge);
> + struct device *dev = &ctx->client->dev;
> + struct drm_connector *connector;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "drm atomic enable\n");
> +
> + if (!bridge->encoder) {
> + DRM_DEV_ERROR(dev, "Parent encoder object not found");
> + return;
> + }
> +
> + connector = drm_atomic_get_new_connector_for_encoder(state->base.state,
> + bridge->encoder);
> + if (!connector)
> + return;
> +
> + ctx->connector = connector;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "attached content protection.\n");
>
> pm_runtime_get_sync(dev);
>
> anx7625_dp_start(ctx);
> }
>
> -static void anx7625_bridge_disable(struct drm_bridge *bridge)
> +static void anx7625_bridge_atomic_disable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old)
> {
> struct anx7625_data *ctx = bridge_to_anx7625(bridge);
> struct device *dev = &ctx->client->dev;
>
> DRM_DEV_DEBUG_DRIVER(dev, "drm disable\n");
>
> + ctx->connector = NULL;
> anx7625_dp_stop(ctx);
>
> pm_runtime_put_sync(dev);
> @@ -1950,11 +2280,14 @@ static struct edid *anx7625_bridge_get_edid(struct drm_bridge *bridge,
>
> static const struct drm_bridge_funcs anx7625_bridge_funcs = {
> .attach = anx7625_bridge_attach,
> - .disable = anx7625_bridge_disable,
> .mode_valid = anx7625_bridge_mode_valid,
> .mode_set = anx7625_bridge_mode_set,
> - .mode_fixup = anx7625_bridge_mode_fixup,
> - .enable = anx7625_bridge_enable,
> + .atomic_check = anx7625_bridge_atomic_check,
> + .atomic_enable = anx7625_bridge_atomic_enable,
> + .atomic_disable = anx7625_bridge_atomic_disable,
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> .detect = anx7625_bridge_detect,
> .get_edid = anx7625_bridge_get_edid,
> };
> @@ -2134,6 +2467,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> anx7625_init_gpio(platform);
>
> mutex_init(&platform->lock);
> + mutex_init(&platform->hdcp_wq_lock);
> +
> + INIT_DELAYED_WORK(&platform->hdcp_work, hdcp_check_work_func);
> + platform->hdcp_workqueue = create_workqueue("hdcp workqueue");
> + if (!platform->hdcp_workqueue) {
> + DRM_DEV_ERROR(dev, "fail to create work queue\n");
> + ret = -ENOMEM;
> + goto free_platform;
> + }
>
> platform->pdata.intp_irq = client->irq;
> if (platform->pdata.intp_irq) {
> @@ -2143,7 +2485,7 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> if (!platform->workqueue) {
> DRM_DEV_ERROR(dev, "fail to create work queue\n");
> ret = -ENOMEM;
> - goto free_platform;
> + goto free_hdcp_wq;
> }
>
> ret = devm_request_threaded_irq(dev, platform->pdata.intp_irq,
> @@ -2213,6 +2555,10 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> if (platform->workqueue)
> destroy_workqueue(platform->workqueue);
>
> +free_hdcp_wq:
> + if (platform->hdcp_workqueue)
> + destroy_workqueue(platform->hdcp_workqueue);
> +
> free_platform:
> kfree(platform);
>
> @@ -2228,6 +2574,12 @@ static int anx7625_i2c_remove(struct i2c_client *client)
> if (platform->pdata.intp_irq)
> destroy_workqueue(platform->workqueue);
>
> + if (platform->hdcp_workqueue) {
> + cancel_delayed_work(&platform->hdcp_work);
> + flush_workqueue(platform->workqueue);
> + destroy_workqueue(platform->workqueue);
> + }
> +
> if (!platform->pdata.low_power_mode)
> pm_runtime_put_sync_suspend(&client->dev);
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 3d79b6fb13c8..89b1b347a463 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -59,10 +59,23 @@
>
> /***************************************************************/
> /* Register definition of device address 0x70 */
> -#define I2C_ADDR_70_DPTX 0x70
> -
> -#define SP_TX_LINK_BW_SET_REG 0xA0
> -#define SP_TX_LANE_COUNT_SET_REG 0xA1
> +#define TX_HDCP_CTRL0 0x01
> +#define STORE_AN BIT(7)
> +#define RX_REPEATER BIT(6)
> +#define RE_AUTHEN BIT(5)
> +#define SW_AUTH_OK BIT(4)
> +#define HARD_AUTH_EN BIT(3)
> +#define ENC_EN BIT(2)
> +#define BKSV_SRM_PASS BIT(1)
> +#define KSVLIST_VLD BIT(0)
> +
> +#define SP_TX_WAIT_R0_TIME 0x40
> +#define SP_TX_WAIT_KSVR_TIME 0x42
> +#define SP_TX_SYS_CTRL1_REG 0x80
> +#define HDCP2TX_FW_EN BIT(4)
> +
> +#define SP_TX_LINK_BW_SET_REG 0xA0
> +#define SP_TX_LANE_COUNT_SET_REG 0xA1
>
> #define M_VID_0 0xC0
> #define M_VID_1 0xC1
> @@ -71,6 +84,12 @@
> #define N_VID_1 0xC4
> #define N_VID_2 0xC5
>
> +#define KEY_START_ADDR 0x9000
> +#define KEY_RESERVED 416
> +
> +#define HDCP14KEY_START_ADDR (KEY_START_ADDR + KEY_RESERVED)
> +#define HDCP14KEY_SIZE 624
> +
> /***************************************************************/
> /* Register definition of device address 0x72 */
> #define AUX_RST 0x04
> @@ -155,9 +174,43 @@
>
> #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
>
> +#define R_BOOT_RETRY 0x00
> +#define R_RAM_ADDR_H 0x01
> +#define R_RAM_ADDR_L 0x02
> +#define R_RAM_LEN_H 0x03
> +#define R_RAM_LEN_L 0x04
> #define FLASH_LOAD_STA 0x05
> #define FLASH_LOAD_STA_CHK BIT(7)
>
> +#define R_RAM_CTRL 0x05
> +/* bit positions */
> +#define FLASH_DONE BIT(7)
> +#define BOOT_LOAD_DONE BIT(6)
> +#define CRC_OK BIT(5)
> +#define LOAD_DONE BIT(4)
> +#define O_RW_DONE BIT(3)
> +#define FUSE_BUSY BIT(2)
> +#define DECRYPT_EN BIT(1)
> +#define LOAD_START BIT(0)
> +
> +#define FLASH_ADDR_HIGH 0x0F
> +#define FLASH_ADDR_LOW 0x10
> +#define FLASH_LEN_HIGH 0x31
> +#define FLASH_LEN_LOW 0x32
> +#define R_FLASH_RW_CTRL 0x33
> +/* bit positions */
> +#define READ_DELAY_SELECT BIT(7)
> +#define GENERAL_INSTRUCTION_EN BIT(6)
> +#define FLASH_ERASE_EN BIT(5)
> +#define RDID_READ_EN BIT(4)
> +#define REMS_READ_EN BIT(3)
> +#define WRITE_STATUS_EN BIT(2)
> +#define FLASH_READ BIT(1)
> +#define FLASH_WRITE BIT(0)
> +
> +#define FLASH_BUF_BASE_ADDR 0x60
> +#define FLASH_BUF_LEN 0x20
> +
> #define XTAL_FRQ_SEL 0x3F
> /* bit field positions */
> #define XTAL_FRQ_SEL_POS 5
> @@ -392,21 +445,29 @@ struct anx7625_data {
> struct platform_device *audio_pdev;
> int hpd_status;
> int hpd_high_cnt;
> + int dp_en;
> + int hdcp_cp;
> /* Lock for work queue */
> struct mutex lock;
> struct i2c_client *client;
> struct anx7625_i2c_client i2c;
> struct i2c_client *last_client;
> + struct timer_list hdcp_timer;
> struct s_edid_data slimport_edid_p;
> struct device *codec_dev;
> hdmi_codec_plugged_cb plugged_cb;
> struct work_struct work;
> struct workqueue_struct *workqueue;
> + struct delayed_work hdcp_work;
> + struct workqueue_struct *hdcp_workqueue;
> + /* Lock for hdcp work queue */
> + struct mutex hdcp_wq_lock;
> char edid_block;
> struct display_timing dt;
> u8 display_timing_valid;
> struct drm_bridge bridge;
> u8 bridge_attached;
> + struct drm_connector *connector;
> struct mipi_dsi_device *dsi;
> };
>
Powered by blists - more mailing lists