[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220105110434.GG303@pengutronix.de>
Date: Wed, 5 Jan 2022 12:04:34 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Shawn Guo <shawnguo@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, devicetree@...r.kernel.org,
Fabio Estevam <festevam@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
Robin van der Gracht <robin@...tonic.nl>,
dri-devel@...ts.freedesktop.org,
Jonathan Cameron <jic23@...nel.org>
Subject: Re: [PATCH v1 4/4] ARM: dts: imx6dl: plym2m, prtvt7, victgo: make
use of new resistive-adc-touch driver
Hi Shawn,
sorry for the delay, I just came back to work.
On Mon, Dec 06, 2021 at 09:06:28AM +0800, Shawn Guo wrote:
> On Mon, Nov 22, 2021 at 01:43:10PM +0100, Oleksij Rempel wrote:
> > The tsc2046 is an ADC used as touchscreen controller. To share as mach
> > code as possible, we should use it as actual ADC + virtual tochscreen
> > controller.
> > With this patch we make use of the new kernel IIO and HID infrastructure.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
>
> One space is enough in subject "victgo: make".
done.
> > ---
> > arch/arm/boot/dts/imx6dl-plym2m.dts | 55 ++++++++++++++++++++---------
> > arch/arm/boot/dts/imx6dl-prtvt7.dts | 53 ++++++++++++++++++++-------
> > arch/arm/boot/dts/imx6dl-victgo.dts | 55 +++++++++++++++++++++--------
> > 3 files changed, 120 insertions(+), 43 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
> > index 60fe5f14666e..e2afedae85cb 100644
> > --- a/arch/arm/boot/dts/imx6dl-plym2m.dts
> > +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
> > @@ -101,6 +101,17 @@ reg_12v0: regulator-12v0 {
> > regulator-min-microvolt = <12000000>;
> > regulator-max-microvolt = <12000000>;
> > };
> > +
> > + touchscreen {
> > + compatible = "resistive-adc-touch";
> > + io-channels = <&adc 1>, <&adc 3>, <&adc 4>, <&adc 5>;
> > + io-channel-names = "y", "z1", "z2", "x";
> > + touchscreen-min-pressure = <64687>;
> > + touchscreen-inverted-x;
> > + touchscreen-inverted-y;
> > + touchscreen-x-plate-ohms = <300>;
> > + touchscreen-y-plate-ohms = <800>;
> > + };
> > };
> >
> > &can1 {
> > @@ -129,26 +140,38 @@ &ecspi2 {
> > pinctrl-0 = <&pinctrl_ecspi2>;
> > status = "okay";
> >
> > - touchscreen@0 {
> > - compatible = "ti,tsc2046";
> > + adc: adc@0 {
>
> Isn't label name "adc" too generic?
I do not have strong opinion about this. Currently we have no
restrictions for the node names:
Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
Documentation/devicetree/bindings/iio/adc/adc.yaml
I can name it touchscreen-adc@0 or something like this. What are your
preferences?
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists