lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220107001328.2233896-6-f.fainelli@gmail.com>
Date:   Thu,  6 Jan 2022 16:13:24 -0800
From:   Florian Fainelli <f.fainelli@...il.com>
To:     linux-mtd@...ts.infradead.org
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Rafał Miłecki <zajec5@...il.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Richard Weinberger <richard@....at>,
        Vignesh Raghavendra <vigneshr@...com>,
        Brian Norris <computersforpeace@...il.com>,
        Kamal Dasu <kdasu.kdev@...il.com>,
        Arnd Bergmann <arnd@...db.de>,
        Cai Huoqing <caihuoqing@...du.com>,
        Colin Ian King <colin.king@...el.com>,
        linux-kernel@...r.kernel.org (open list),
        linux-wireless@...r.kernel.org (open list:BROADCOM SPECIFIC AMBA DRIVER
        (BCMA)),
        bcm-kernel-feedback-list@...adcom.com (open list:BROADCOM STB NAND
        FLASH DRIVER)
Subject: [PATCH v2 5/9] mtd: rawnand: brcmnand: Allow working without interrupts

The BCMA devices include the brcmnand controller but they do not wire up
any interrupt line, allow the main interrupt to be optional and update
the completion path to also check for the lack of an interrupt line.

Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 54 +++++++++++-------------
 1 file changed, 24 insertions(+), 30 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index eb3f96489f83..08e2acde5133 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -216,7 +216,7 @@ struct brcmnand_controller {
 	void __iomem		*nand_base;
 	void __iomem		*nand_fc; /* flash cache */
 	void __iomem		*flash_dma_base;
-	unsigned int		irq;
+	int			irq;
 	unsigned int		dma_irq;
 	int			nand_version;
 
@@ -1610,7 +1610,7 @@ static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
 	bool err = false;
 	int sts;
 
-	if (mtd->oops_panic_write) {
+	if (mtd->oops_panic_write || ctrl->irq < 0) {
 		/* switch to interrupt polling and PIO mode */
 		disable_ctrl_irqs(ctrl);
 		sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
@@ -3144,35 +3144,29 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 	}
 
 	/* IRQ */
-	ctrl->irq = platform_get_irq(pdev, 0);
-	if ((int)ctrl->irq < 0) {
-		dev_err(dev, "no IRQ defined\n");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	/*
-	 * Some SoCs integrate this controller (e.g., its interrupt bits) in
-	 * interesting ways
-	 */
-	if (soc) {
-		ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
-				       DRV_NAME, ctrl);
+	ctrl->irq = platform_get_irq_optional(pdev, 0);
+	if (ctrl->irq > 0) {
+		/*
+		 * Some SoCs integrate this controller (e.g., its interrupt bits) in
+		 * interesting ways
+		 */
+		if (soc) {
+			ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
+					       DRV_NAME, ctrl);
 
-		/* Enable interrupt */
-		ctrl->soc->ctlrdy_ack(ctrl->soc);
-		ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
-		if (brcmnand_soc_has_ops(soc))
-			static_branch_enable(&brcmnand_soc_has_ops_key);
-	} else {
-		/* Use standard interrupt infrastructure */
-		ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
-				       DRV_NAME, ctrl);
-	}
-	if (ret < 0) {
-		dev_err(dev, "can't allocate IRQ %d: error %d\n",
-			ctrl->irq, ret);
-		goto err;
+			/* Enable interrupt */
+			ctrl->soc->ctlrdy_ack(ctrl->soc);
+			ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+		} else {
+			/* Use standard interrupt infrastructure */
+			ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
+					       DRV_NAME, ctrl);
+		}
+		if (ret < 0) {
+			dev_err(dev, "can't allocate IRQ %d: error %d\n",
+				ctrl->irq, ret);
+			goto err;
+		}
 	}
 
 	for_each_available_child_of_node(dn, child) {
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ