| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220110152432.3799227-1-nikita.yoush@cogentembedded.com>
Date: Mon, 10 Jan 2022 18:24:32 +0300
From: Nikita Yushchenko <nikita.yoush@...entembedded.com>
To: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandru Ardelean <aardelean@...iqon.com>,
Cai Huoqing <caihuoqing@...du.com>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
Nikita Yushchenko <nikita.yoush@...entembedded.com>
Subject: [PATCH v3] iio: st_sensors: don't always auto-enable I2C and SPI interface drivers
This patch makes I2C and SPI interface drivers for STMicroelectronics
sensor chips individually selectable via Kconfig.
The default is kept unchanged - I2C and SPI interface drivers are still
selected by default if the corresponding bus support is available.
However, the patch makes it possible to explicitly disable drivers
that are not needed for a particular target.
Signed-off-by: Nikita Yushchenko <nikita.yoush@...entembedded.com>
---
Changes since v2:
- fix subject and spelling in the commit message
Changes since v1:
- use "default XXX" instead of "default y if XXX", per suggestion by
Arnd Bergmann
drivers/iio/accel/Kconfig | 35 ++++++++++++++-----------
drivers/iio/common/st_sensors/Kconfig | 2 --
drivers/iio/gyro/Kconfig | 37 ++++++++++++++++-----------
drivers/iio/imu/st_lsm9ds0/Kconfig | 28 +++++++++++++++-----
drivers/iio/magnetometer/Kconfig | 35 ++++++++++++++-----------
drivers/iio/pressure/Kconfig | 35 ++++++++++++++-----------
6 files changed, 104 insertions(+), 68 deletions(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 49587c992a6d..eb17ca40e08a 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -349,8 +349,6 @@ config IIO_ST_ACCEL_3AXIS
depends on !SENSORS_LIS3_I2C
depends on !SENSORS_LIS3_SPI
select IIO_ST_SENSORS_CORE
- select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
- select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics accelerometers:
@@ -358,23 +356,30 @@ config IIO_ST_ACCEL_3AXIS
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
- This driver can also be built as a module. If so, these modules
- will be created:
- - st_accel (core functions for the driver [it is mandatory]);
- - st_accel_i2c (necessary for the I2C devices [optional*]);
- - st_accel_spi (necessary for the SPI devices [optional*]);
-
- (*) one of these is necessary to do something.
+ Also need to enable at least one of I2C and SPI interface drivers
+ below.
config IIO_ST_ACCEL_I2C_3AXIS
- tristate
- depends on IIO_ST_ACCEL_3AXIS
- depends on IIO_ST_SENSORS_I2C
+ tristate "STMicroelectronics accelerometers 3-Axis I2C Interface"
+ depends on I2C && IIO_ST_ACCEL_3AXIS
+ default I2C && IIO_ST_ACCEL_3AXIS
+ select IIO_ST_SENSORS_I2C
+ help
+ Build support for STMicroelectronics accelerometers I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_accel_i2c.
config IIO_ST_ACCEL_SPI_3AXIS
- tristate
- depends on IIO_ST_ACCEL_3AXIS
- depends on IIO_ST_SENSORS_SPI
+ tristate "STMicroelectronics accelerometers 3-Axis SPI Interface"
+ depends on SPI_MASTER && IIO_ST_ACCEL_3AXIS
+ default SPI_MASTER && IIO_ST_ACCEL_3AXIS
+ select IIO_ST_SENSORS_SPI
+ help
+ Build support for STMicroelectronics accelerometers SPI interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_accel_spi.
config KXSD9
tristate "Kionix KXSD9 Accelerometer Driver"
diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig
index 9364ec7a811f..eda8f347fda5 100644
--- a/drivers/iio/common/st_sensors/Kconfig
+++ b/drivers/iio/common/st_sensors/Kconfig
@@ -13,5 +13,3 @@ config IIO_ST_SENSORS_SPI
config IIO_ST_SENSORS_CORE
tristate
- select IIO_ST_SENSORS_I2C if I2C
- select IIO_ST_SENSORS_SPI if SPI_MASTER
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index a672f7d12bbb..97b86c4a53a6 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -139,30 +139,37 @@ config IIO_ST_GYRO_3AXIS
tristate "STMicroelectronics gyroscopes 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
select IIO_ST_SENSORS_CORE
- select IIO_ST_GYRO_I2C_3AXIS if (I2C)
- select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics gyroscopes:
L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330, LSM9DS0.
- This driver can also be built as a module. If so, these modules
- will be created:
- - st_gyro (core functions for the driver [it is mandatory]);
- - st_gyro_i2c (necessary for the I2C devices [optional*]);
- - st_gyro_spi (necessary for the SPI devices [optional*]);
-
- (*) one of these is necessary to do something.
+ Also need to enable at least one of I2C and SPI interface drivers
+ below.
config IIO_ST_GYRO_I2C_3AXIS
- tristate
- depends on IIO_ST_GYRO_3AXIS
- depends on IIO_ST_SENSORS_I2C
+ tristate "STMicroelectronics gyroscopes 3-Axis I2C Interface"
+ depends on I2C && IIO_ST_GYRO_3AXIS
+ default I2C && IIO_ST_GYRO_3AXIS
+ select IIO_ST_SENSORS_I2C
+ help
+ Build support for STMicroelectronics gyroscopes I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_gyro_i2c.
+
config IIO_ST_GYRO_SPI_3AXIS
- tristate
- depends on IIO_ST_GYRO_3AXIS
- depends on IIO_ST_SENSORS_SPI
+ tristate "STMicroelectronics gyroscopes 3-Axis SPI Interface"
+ depends on SPI_MASTER && IIO_ST_GYRO_3AXIS
+ default SPI_MASTER && IIO_ST_GYRO_3AXIS
+ select IIO_ST_SENSORS_SPI
+ help
+ Build support for STMicroelectronics gyroscopes SPI interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_gyro_spi.
+
config ITG3200
tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
diff --git a/drivers/iio/imu/st_lsm9ds0/Kconfig b/drivers/iio/imu/st_lsm9ds0/Kconfig
index 53b7017014f8..d29558edee60 100644
--- a/drivers/iio/imu/st_lsm9ds0/Kconfig
+++ b/drivers/iio/imu/st_lsm9ds0/Kconfig
@@ -5,8 +5,6 @@ config IIO_ST_LSM9DS0
depends on (I2C || SPI_MASTER) && SYSFS
depends on !SENSORS_LIS3_I2C
depends on !SENSORS_LIS3_SPI
- select IIO_ST_LSM9DS0_I2C if I2C
- select IIO_ST_LSM9DS0_SPI if SPI_MASTER
select IIO_ST_ACCEL_3AXIS
select IIO_ST_MAGN_3AXIS
@@ -17,12 +15,30 @@ config IIO_ST_LSM9DS0
To compile this driver as a module, choose M here: the module
will be called st_lsm9ds0.
+ Also need to enable at least one of I2C and SPI interface drivers
+
config IIO_ST_LSM9DS0_I2C
- tristate
- depends on IIO_ST_LSM9DS0
+ tristate "STMicroelectronics LSM9DS0 IMU I2C interface"
+ depends on I2C && IIO_ST_LSM9DS0
+ default I2C && IIO_ST_LSM9DS0
+ select IIO_ST_ACCEL_I2C_3AXIS
+ select IIO_ST_MAGN_I2C_3AXIS
select REGMAP_I2C
+ help
+ Build support for STMicroelectronics LSM9DS0 IMU I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_lsm9ds0_i2c.
config IIO_ST_LSM9DS0_SPI
- tristate
- depends on IIO_ST_LSM9DS0
+ tristate "STMicroelectronics LSM9DS0 IMU SPI interface"
+ depends on SPI_MASTER && IIO_ST_LSM9DS0
+ default SPI_MASTER && IIO_ST_LSM9DS0
+ select IIO_ST_ACCEL_SPI_3AXIS
+ select IIO_ST_MAGN_SPI_3AXIS
select REGMAP_SPI
+ help
+ Build support for STMicroelectronics LSM9DS0 IMU I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_lsm9ds0_spi.
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 565ee41ccb3a..54445365c4bc 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -117,30 +117,35 @@ config IIO_ST_MAGN_3AXIS
tristate "STMicroelectronics magnetometers 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
select IIO_ST_SENSORS_CORE
- select IIO_ST_MAGN_I2C_3AXIS if (I2C)
- select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics magnetometers:
LSM303DLHC, LSM303DLM, LIS3MDL.
- This driver can also be built as a module. If so, these modules
- will be created:
- - st_magn (core functions for the driver [it is mandatory]);
- - st_magn_i2c (necessary for the I2C devices [optional*]);
- - st_magn_spi (necessary for the SPI devices [optional*]);
-
- (*) one of these is necessary to do something.
+ Also need to enable at least one of I2C and SPI interface drivers
+ below.
config IIO_ST_MAGN_I2C_3AXIS
- tristate
- depends on IIO_ST_MAGN_3AXIS
- depends on IIO_ST_SENSORS_I2C
+ tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
+ depends on I2C && IIO_ST_MAGN_3AXIS
+ default I2C && IIO_ST_MAGN_3AXIS
+ select IIO_ST_SENSORS_I2C
+ help
+ Build support for STMicroelectronics magnetometers I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_magn_i2c.
config IIO_ST_MAGN_SPI_3AXIS
- tristate
- depends on IIO_ST_MAGN_3AXIS
- depends on IIO_ST_SENSORS_SPI
+ tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
+ depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
+ default SPI_MASTER && IIO_ST_MAGN_3AXIS
+ select IIO_ST_SENSORS_SPI
+ help
+ Build support for STMicroelectronics magnetometers SPI interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_magn_spi.
config SENSORS_HMC5843
tristate
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index fc0d3cfca418..0ff756cea63a 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -194,30 +194,35 @@ config IIO_ST_PRESS
tristate "STMicroelectronics pressure sensor Driver"
depends on (I2C || SPI_MASTER) && SYSFS
select IIO_ST_SENSORS_CORE
- select IIO_ST_PRESS_I2C if (I2C)
- select IIO_ST_PRESS_SPI if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics pressure
sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.
- This driver can also be built as a module. If so, these modules
- will be created:
- - st_pressure (core functions for the driver [it is mandatory]);
- - st_pressure_i2c (necessary for the I2C devices [optional*]);
- - st_pressure_spi (necessary for the SPI devices [optional*]);
-
- (*) one of these is necessary to do something.
+ Also need to enable at least one of I2C and SPI interface drivers
+ below.
config IIO_ST_PRESS_I2C
- tristate
- depends on IIO_ST_PRESS
- depends on IIO_ST_SENSORS_I2C
+ tristate "STMicroelectronics pressure sensor I2C Interface"
+ depends on I2C && IIO_ST_PRESS
+ default I2C && IIO_ST_PRESS
+ select IIO_ST_SENSORS_I2C
+ help
+ Build support for STMicroelectronics pressure sensor I2C interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_pressure_i2c.
config IIO_ST_PRESS_SPI
- tristate
- depends on IIO_ST_PRESS
- depends on IIO_ST_SENSORS_SPI
+ tristate "STMicroelectronics pressure sensor SPI Interface"
+ depends on SPI_MASTER && IIO_ST_PRESS
+ default SPI_MASTER && IIO_ST_PRESS
+ select IIO_ST_SENSORS_SPI
+ help
+ Build support for STMicroelectronics pressure sensor SPI interface.
+
+ To compile this driver as a module, choose M here. The module
+ will be called st_pressure_spi.
config T5403
tristate "EPCOS T5403 digital barometric pressure sensor driver"
--
2.30.2
Powered by blists - more mailing lists