| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Ydyc/TJiVUHXRDVw@ripper>
Date: Mon, 10 Jan 2022 12:54:21 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: David Heidelberg <david@...t.cz>
Cc: Andy Gross <agross@...nel.org>,
Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
~okias/devicetree@...ts.sr.ht, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] dt-bindings: phy: convert Qualcomm USB HS phy to yaml
On Wed 29 Dec 16:07 PST 2021, David Heidelberg wrote:
> Conversion of Qualcomm USB HS phy documentation to yaml.
>
> Signed-off-by: David Heidelberg <david@...t.cz>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> ---
> v2:
> - changed uint8 array to matrix
> - improved clock-names check
> - move reset-names items, adjust DTS files later
> - added clocks and resets min and maxItems
> - if'ed resets, since apq8064 doesn't have phy reset
> ---
> .../bindings/phy/qcom,usb-hs-phy.txt | 84 --------------
> .../bindings/phy/qcom,usb-hs-phy.yaml | 108 ++++++++++++++++++
> 2 files changed, 108 insertions(+), 84 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
> deleted file mode 100644
> index b3b75c1e6285..000000000000
> --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -Qualcomm's USB HS PHY
> -
> -PROPERTIES
> -
> -- compatible:
> - Usage: required
> - Value type: <string>
> - Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
> - following:
> -
> - "qcom,usb-hs-phy-apq8064"
> - "qcom,usb-hs-phy-msm8916"
> - "qcom,usb-hs-phy-msm8974"
> -
> -- #phy-cells:
> - Usage: required
> - Value type: <u32>
> - Definition: Should contain 0
> -
> -- clocks:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: Should contain clock specifier for the reference and sleep
> - clocks
> -
> -- clock-names:
> - Usage: required
> - Value type: <stringlist>
> - Definition: Should contain "ref" and "sleep" for the reference and sleep
> - clocks respectively
> -
> -- resets:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: Should contain the phy and POR resets
> -
> -- reset-names:
> - Usage: required
> - Value type: <stringlist>
> - Definition: Should contain "phy" and "por" for the phy and POR resets
> - respectively
> -
> -- v3p3-supply:
> - Usage: required
> - Value type: <phandle>
> - Definition: Should contain a reference to the 3.3V supply
> -
> -- v1p8-supply:
> - Usage: required
> - Value type: <phandle>
> - Definition: Should contain a reference to the 1.8V supply
> -
> -- extcon:
> - Usage: optional
> - Value type: <prop-encoded-array>
> - Definition: Should contain the vbus extcon
> -
> -- qcom,init-seq:
> - Usage: optional
> - Value type: <u8 array>
> - Definition: Should contain a sequence of ULPI address and value pairs to
> - program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
> - to Device Mode Eye Diagram test. The addresses are offsets
> - from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
> - <0x1 0x53> would mean "write the value 0x53 to address 0x81".
> -
> -EXAMPLE
> -
> -otg: usb-controller {
> - ulpi {
> - phy {
> - compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
> - #phy-cells = <0>;
> - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
> - clock-names = "ref", "sleep";
> - resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
> - reset-names = "phy", "por";
> - v3p3-supply = <&pm8941_l24>;
> - v1p8-supply = <&pm8941_l6>;
> - extcon = <&smbb>;
> - qcom,init-seq = /bits/ 8 <0x1 0x63>;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> new file mode 100644
> index 000000000000..a60386bd19b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's USB HS PHY binding description
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@...aro.org>
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,usb-hs-phy-apq8064
> + then:
> + properties:
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + const: por
> +
> + else:
> + properties:
> + resets:
> + minItems: 2
> + maxItems: 2
> +
> + reset-names:
> + items:
> + - const: phy
> + - const: por
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - qcom,usb-hs-phy-apq8064
> + - qcom,usb-hs-phy-msm8916
> + - qcom,usb-hs-phy-msm8974
> + - const: qcom,usb-hs-phy
> +
> + clocks:
> + minItems: 2
> + maxItems: 2
> +
> + clock-names:
> + maxItems: 2
> + contains:
> + items:
> + - const: ref
> + - const: sleep
> +
> + resets: true
> +
> + reset-names: true
> +
> + v1p8-supply: true
> +
> + v3p3-supply: true
> +
> + extcon: true
> +
> + "#phy-cells":
> + const: 0
> +
> + qcom,init-seq:
> + $ref: /schemas/types.yaml#/definitions/uint8-matrix
> + description: >
> + Sequence of ULPI address and value pairs to
> + program into the ULPI_EXT_VENDOR_SPECIFIC area.
> + This is related to Device Mode Eye Diagram test.
> + maxItems: 32 # no hard limit
> + items:
> + items:
> + - description: >
> + the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address
> + - description: value
> +
> +required:
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + otg: usb-controller {
> + ulpi {
> + phy {
> + compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
> + #phy-cells = <0>;
> + clocks = <&clk 0>, <&clk 258>;
> + clock-names = "ref", "sleep";
> + resets = <&gcc 10>, <&otg 0>;
> + reset-names = "phy", "por";
> + v3p3-supply = <&pm8941_l24>;
> + v1p8-supply = <&pm8941_l6>;
> + extcon = <&smbb>;
> + qcom,init-seq = /bits/ 8 <0x1 0x63>;
> + };
> + };
> + };
> --
> 2.34.1
>
Powered by blists - more mailing lists