| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220111174805.223732-5-krzysztof.kozlowski@canonical.com>
Date: Tue, 11 Jan 2022 18:48:04 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org
Cc: Rob Herring <robh@...nel.org>
Subject: [PATCH v2 4/5] dt-bindings: mfd: maxim,max77843: add MAX77843 bindings
Document the bindings for MAX77843 MFD driver, based on Exynos5433 TM2
devicetree. These are neither accurate nor finished bindings but at
least allow parsing existing DTS files.
The example DTS was copied from existing DTS
(exynos5433-tm2-common.dtsi), so keep the license as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/mfd/maxim,max77843.yaml | 144 ++++++++++++++++++
1 file changed, 144 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
new file mode 100644
index 000000000000..61a0f9dcb983
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+ Integrated Circuit (MUIC).
+
+ The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
+ includes voltage current regulators, charger, fuel-gauge, haptic motor driver
+ and MicroUSB management IC.
+
+properties:
+ compatible:
+ const: maxim,max77843
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ extcon:
+ $ref: /schemas/extcon/maxim,max77843.yaml
+
+ motor-driver:
+ type: object
+ properties:
+ compatible:
+ const: maxim,max77843-haptic
+
+ haptic-supply:
+ description: Power supply to the haptic motor
+
+ pwms:
+ maxItems: 1
+
+ required:
+ - compatible
+ - haptic-supply
+ - pwms
+
+ regulators:
+ $ref: /schemas/regulator/maxim,max77843.yaml
+
+required:
+ - compatible
+ - interrupts
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "maxim,max77843";
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x66>;
+
+ extcon {
+ compatible = "maxim,max77843-muic";
+
+ connector {
+ compatible = "samsung,usb-connector-11pin",
+ "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ /*
+ * TODO: The DTS this is based on does not have
+ * port@0 which is a required property. The ports
+ * look incomplete and need fixing.
+ * Add a disabled port just to satisfy dtschema.
+ */
+ reg = <0>;
+ status = "disabled";
+ };
+
+ port@3 {
+ reg = <3>;
+ endpoint {
+ remote-endpoint = <&mhl_to_musb_con>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port {
+ endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";
+
+ SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ motor-driver {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ };
+ };
+ };
--
2.32.0
Powered by blists - more mailing lists