[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220111201426.326777-6-krzysztof.kozlowski@canonical.com>
Date: Tue, 11 Jan 2022 21:14:03 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Tomasz Figa <tomasz.figa@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Marek Szyprowski <m.szyprowski@...sung.com>,
Sam Protsenko <semen.protsenko@...aro.org>,
Chanho Park <chanho61.park@...sung.com>,
Alim Akhtar <alim.akhtar@...il.com>,
Alim Akhtar <alim.akhtar@...sung.com>
Subject: [PATCH v2 05/28] ARM: dts: exynos: override pins by label in Peach Pit
Using node paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@...sung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 44 +++++++++++-----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e76fb104db19..1ae5528e9ebf 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -868,27 +868,26 @@ pmic_dvs_1: pmic-dvs-1 {
};
};
-&pinctrl_1 {
- /* Adjust WiFi drive strengths lower for EMI */
- sd1_clk: sd1-clk {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_cmd: sd1-cmd {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus4 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus1: sd1-bus-width1 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus8 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus4: sd1-bus-width4 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_clk {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus8: sd1-bus-width8 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_cmd {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_2 {
@@ -907,12 +906,13 @@ pmic_dvs_3: pmic-dvs-3 {
};
};
-&pinctrl_3 {
- /* Drive SPI lines at x2 for better integrity */
- spi2-bus {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
+&pinctrl_3 {
/* Drive SPI chip select at x2 for better integrity */
ec_spi_cs: ec-spi-cs {
samsung,pins = "gpb1-2";
--
2.32.0
Powered by blists - more mailing lists