linux-kernel - [PATCH 1/2] serial: stm32: prevent TDR register overwrite when sending x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Tue, 11 Jan 2022 17:44:40 +0100
From:   Valentin Caron <valentin.caron@...s.st.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC:     Jiri Slaby <jirislaby@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Erwan Le Ray <erwan.leray@...s.st.com>,
        Valentin Caron <valentin.caron@...s.st.com>,
        <linux-serial@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/2] serial: stm32: prevent TDR register overwrite when sending x_char

When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.

This code checks if the previous value in TDR register is sent before
writing the x_char value into register.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")

Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
 drivers/tty/serial/stm32-usart.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
 	struct stm32_port *stm32_port = to_stm32_port(port);
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	struct circ_buf *xmit = &port->state->xmit;
+	u32 isr;
+	int ret;
 
 	if (port->x_char) {
 		if (stm32_usart_tx_dma_started(stm32_port) &&
 		    stm32_usart_tx_dma_enabled(stm32_port))
 			stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+		/* Check that TDR is empty before filling FIFO */
+		ret =
+		readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+						  isr,
+						  (isr & USART_SR_TXE),
+						  10, 1000);
+		if (ret)
+			dev_warn(port->dev, "1 character may be erased\n");
+
 		writel_relaxed(port->x_char, port->membase + ofs->tdr);
 		port->x_char = 0;
 		port->icount.tx++;
-- 
2.17.1