linux-kernel - Re: [PATCH v3 2/5] MIPS: ralink: implement 'pcibios_root_bridge

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMhs-H851_Dh4R2TXWh80n1BwXQ7PdY+mQ652iWkJs2erCgK-A@mail.gmail.com>
Date:   Wed, 12 Jan 2022 21:10:19 +0100
From:   Sergio Paracuellos <sergio.paracuellos@...il.com>
To:     Guenter Roeck <linux@...ck-us.net>
Cc:     linux-pci <linux-pci@...r.kernel.org>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 2/5] MIPS: ralink: implement 'pcibios_root_bridge_prepare()'

On Wed, Jan 12, 2022 at 7:20 PM Guenter Roeck <linux@...ck-us.net> wrote:
>
> On Tue, Dec 07, 2021 at 11:49:21AM +0100, Sergio Paracuellos wrote:
> > PCI core code call 'pcibios_root_bridge_prepare()' function inside function
> > 'pci_register_host_bridge()'. This point is very good way to properly enter
> > into this MIPS ralink specific code to properly setup I/O coherency units
> > with PCI memory addresses.
> >
> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
>
> FWIW:
>
> Reviewed-by: Guenter Roeck <linux@...ck-us.net>

Thanks!

Best regards,
    Sergio Paracuellos

>
> > ---
> >  arch/mips/ralink/mt7621.c | 31 +++++++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> >
> > diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
> > index bd71f5b14238..d6efffd4dd20 100644
> > --- a/arch/mips/ralink/mt7621.c
> > +++ b/arch/mips/ralink/mt7621.c
> > @@ -10,6 +10,8 @@
> >  #include <linux/slab.h>
> >  #include <linux/sys_soc.h>
> >  #include <linux/memblock.h>
> > +#include <linux/pci.h>
> > +#include <linux/bug.h>
> >
> >  #include <asm/bootinfo.h>
> >  #include <asm/mipsregs.h>
> > @@ -22,6 +24,35 @@
> >
> >  static void *detect_magic __initdata = detect_memory_region;
> >
> > +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> > +{
> > +     struct resource_entry *entry;
> > +     resource_size_t mask;
> > +
> > +     entry = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
> > +     if (!entry) {
> > +             pr_err("Cannot get memory resource\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     if (mips_cps_numiocu(0)) {
> > +             /*
> > +              * Hardware doesn't accept mask values with 1s after
> > +              * 0s (e.g. 0xffef), so warn if that's happen
> > +              */
> > +             mask = ~(entry->res->end - entry->res->start) & CM_GCR_REGn_MASK_ADDRMASK;
> > +             WARN_ON(mask && BIT(ffz(~mask)) - 1 != ~mask);
> > +
> > +             write_gcr_reg1_base(entry->res->start);
> > +             write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
> > +             pr_info("PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
> > +                     (unsigned long long)read_gcr_reg1_base(),
> > +                     (unsigned long long)read_gcr_reg1_mask());
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> >  phys_addr_t mips_cpc_default_phys_base(void)
> >  {
> >       panic("Cannot detect cpc address");
> > --
> > 2.33.0
> >