[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220112230247.982212-4-iwona.winiarska@intel.com>
Date: Thu, 13 Jan 2022 00:02:37 +0100
From: Iwona Winiarska <iwona.winiarska@...el.com>
To: linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: devicetree@...r.kernel.org, linux-aspeed@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Jonathan Corbet <corbet@....net>,
Borislav Petkov <bp@...en8.de>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Tony Luck <tony.luck@...el.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Dan Williams <dan.j.williams@...el.com>,
Randy Dunlap <rdunlap@...radead.org>,
Zev Weiss <zweiss@...inix.com>,
David Muller <d.mueller@...oft.ch>,
Dave Hansen <dave.hansen@...el.com>,
Billy Tsai <billy_tsai@...eedtech.com>,
Iwona Winiarska <iwona.winiarska@...el.com>,
Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Subject: [PATCH v5 03/13] ARM: dts: aspeed: Add PECI controller nodes
Add PECI controller nodes with all required information.
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@...el.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 11 +++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 11 +++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
3 files changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b313a1cf5f73..3c2961da6272 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -391,6 +391,17 @@ uart_routing: uart-routing@9c {
};
};
+ peci0: peci-controller@...8b000 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
uart2: serial@...8d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c7049454c7cb..aab1c3ecb4dc 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -511,6 +511,17 @@ ibt: ibt@140 {
};
};
+ peci0: peci-controller@...8b000 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
uart2: serial@...8d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 5106a424f1ce..564f1292993f 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -507,6 +507,17 @@ wdt4: watchdog@...850c0 {
status = "disabled";
};
+ peci0: peci-controller@...8b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
lpc: lpc@...89000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
--
2.31.1
Powered by blists - more mailing lists