| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 12 Jan 2022 12:54:38 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: daniel@...ll.ch, linux-amlogic@...ts.infradead.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver
Hi Neil,
On Mon, Sep 7, 2020 at 1:48 PM Neil Armstrong <narmstrong@...libre.com> wrote:
>
> The Amlogic AXg SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a), with a custom
> glue managing the IP resets, clock and data input similar to the DW-HDMI Glue on other
> Amlogic SoCs.
>
> This adds support for the Glue managing the transceiver, mimicing the init flow provided
> by Amlogic to setup the ENCl encoder, the glue, the transceiver, the digital D-PHY and the
> Analog PHY in the proper way.
>
> The DW-MIPI-DSI transceiver + D-PHY are directly clocked by the VCLK2 clock, which pixel clock
> is derived and feeds the ENCL encoder and the VIU pixel reader.
>
> An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
> DW-MIPI-DSI transceiver.
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> drivers/gpu/drm/meson/Kconfig | 7 +
> drivers/gpu/drm/meson/Makefile | 1 +
> drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 562 ++++++++++++++++++++++
> 3 files changed, 570 insertions(+)
> create mode 100644 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>
> diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
> index 9f9281dd49f8..385f6f23839b 100644
> --- a/drivers/gpu/drm/meson/Kconfig
> +++ b/drivers/gpu/drm/meson/Kconfig
> @@ -16,3 +16,10 @@ config DRM_MESON_DW_HDMI
> default y if DRM_MESON
> select DRM_DW_HDMI
> imply DRM_DW_HDMI_I2S_AUDIO
> +
> +config DRM_MESON_DW_MIPI_DSI
> + tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
> + depends on DRM_MESON
> + default y if DRM_MESON
> + select DRM_DW_MIPI_DSI
> + select GENERIC_PHY_MIPI_DPHY
> diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
> index 28a519cdf66b..2cc870e91182 100644
> --- a/drivers/gpu/drm/meson/Makefile
> +++ b/drivers/gpu/drm/meson/Makefile
> @@ -5,3 +5,4 @@ meson-drm-y += meson_rdma.o meson_osd_afbcd.o
>
> obj-$(CONFIG_DRM_MESON) += meson-drm.o
> obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
> +obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
> diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> new file mode 100644
> index 000000000000..bbe1294fce7c
> --- /dev/null
> +++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> @@ -0,0 +1,562 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@...libre.com>
> + * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/reset.h>
> +#include <linux/phy/phy.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <drm/drm_mipi_dsi.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_print.h>
> +
> +#include "meson_drv.h"
> +#include "meson_dw_mipi_dsi.h"
> +#include "meson_registers.h"
> +#include "meson_venc.h"
> +
> +#define DRIVER_NAME "meson-dw-mipi-dsi"
> +#define DRIVER_DESC "Amlogic Meson MIPI-DSI DRM driver"
> +
> +/* MIPI DSI/VENC Color Format Definitions */
> +#define MIPI_DSI_VENC_COLOR_30B 0x0
> +#define MIPI_DSI_VENC_COLOR_24B 0x1
> +#define MIPI_DSI_VENC_COLOR_18B 0x2
> +#define MIPI_DSI_VENC_COLOR_16B 0x3
> +
> +#define COLOR_16BIT_CFG_1 0x0
> +#define COLOR_16BIT_CFG_2 0x1
> +#define COLOR_16BIT_CFG_3 0x2
> +#define COLOR_18BIT_CFG_1 0x3
> +#define COLOR_18BIT_CFG_2 0x4
> +#define COLOR_24BIT 0x5
> +#define COLOR_20BIT_LOOSE 0x6
> +#define COLOR_24_BIT_YCBCR 0x7
> +#define COLOR_16BIT_YCBCR 0x8
> +#define COLOR_30BIT 0x9
> +#define COLOR_36BIT 0xa
> +#define COLOR_12BIT 0xb
> +#define COLOR_RGB_111 0xc
> +#define COLOR_RGB_332 0xd
> +#define COLOR_RGB_444 0xe
> +
> +/* MIPI DSI Relative REGISTERs Definitions */
> +/* For MIPI_DSI_TOP_CNTL */
> +#define BIT_DPI_COLOR_MODE 20
> +#define BIT_IN_COLOR_MODE 16
> +#define BIT_CHROMA_SUBSAMPLE 14
> +#define BIT_COMP2_SEL 12
> +#define BIT_COMP1_SEL 10
> +#define BIT_COMP0_SEL 8
> +#define BIT_DE_POL 6
> +#define BIT_HSYNC_POL 5
> +#define BIT_VSYNC_POL 4
> +#define BIT_DPICOLORM 3
> +#define BIT_DPISHUTDN 2
> +#define BIT_EDPITE_INTR_PULSE 1
> +#define BIT_ERR_INTR_PULSE 0
> +
> +/* HHI Registers */
> +#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
> +#define VCLK2_DIV_MASK 0xff
> +#define VCLK2_DIV_EN BIT(16)
> +#define VCLK2_DIV_RESET BIT(17)
> +#define CTS_ENCL_SEL_MASK (0xf << 12)
> +#define CTS_ENCL_SEL_SHIFT 12
> +#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
> +#define VCLK2_EN BIT(19)
> +#define VCLK2_SEL_MASK (0x7 << 16)
> +#define VCLK2_SEL_SHIFT 16
> +#define VCLK2_SOFT_RESET BIT(15)
> +#define VCLK2_DIV1_EN BIT(0)
> +#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
> +#define CTS_ENCL_EN BIT(3)
> +
> +/**
> + * DOC: MIPI DSI
> + *
> + */
> +
> +struct meson_dw_mipi_dsi {
> + struct drm_encoder encoder;
> + struct meson_drm *priv;
> + struct device *dev;
> + void __iomem *base;
> + struct phy *phy;
> + union phy_configure_opts phy_opts;
> + struct dw_mipi_dsi *dmd;
> + struct dw_mipi_dsi_plat_data pdata;
> + struct mipi_dsi_device *dsi_device;
> + unsigned long mode_flags;
> + struct clk *px_clk;
> +};
> +#define encoder_to_meson_dw_mipi_dsi(x) \
> + container_of(x, struct meson_dw_mipi_dsi, encoder)
> +
> +static void dw_mipi_dsi_set_vclk(struct meson_dw_mipi_dsi *mipi_dsi,
> + struct drm_display_mode *mode)
> +{
> + struct meson_drm *priv = mipi_dsi->priv;
> + unsigned int vclk2_div;
> + unsigned int pll_rate;
> + int ret;
> +
> + pll_rate = mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate;
> + vclk2_div = pll_rate / (mode->clock * 1000);
> +
> + ret = clk_set_rate(mipi_dsi->px_clk, pll_rate);
> + if (ret) {
> + pr_err("Failed to set DSI PLL rate %lu\n",
> + mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate);
> +
> + return;
> + }
> +
> + /* Disable VCLK2 */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, 0);
> +
> + /* Setup the VCLK2 divider value */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
> + VCLK2_DIV_MASK, (vclk2_div - 1));
> +
> + /* select gp0 for vclk2 */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> + VCLK2_SEL_MASK, (0 << VCLK2_SEL_SHIFT));
> +
> + /* enable vclk2 gate */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, VCLK2_EN);
> +
> + /* select vclk2_div1 for encl */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
> + CTS_ENCL_SEL_MASK, (8 << CTS_ENCL_SEL_SHIFT));
> +
> + /* release vclk2_div_reset and enable vclk2_div */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
> + VCLK2_DIV_EN | VCLK2_DIV_RESET, VCLK2_DIV_EN);
> +
> + /* enable vclk2_div1 gate */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> + VCLK2_DIV1_EN, VCLK2_DIV1_EN);
> +
> + /* reset vclk2 */
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> + VCLK2_SOFT_RESET, VCLK2_SOFT_RESET);
> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> + VCLK2_SOFT_RESET, 0);
> +
> + /* enable encl_clk */
> + regmap_update_bits(priv->hhi, HHI_VID_CLK_CNTL2,
> + CTS_ENCL_EN, CTS_ENCL_EN);
> +
> + usleep_range(10000, 11000);
> +}
> +
> +static int dw_mipi_dsi_phy_init(void *priv_data)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> + struct meson_drm *priv = mipi_dsi->priv;
> +
> +
> + phy_power_on(mipi_dsi->phy);
> +
> + writel_relaxed(1, priv->io_base + _REG(ENCL_VIDEO_EN));
> +
> + return 0;
> +}
> +
> +static void dw_mipi_dsi_phy_power_off(void *priv_data)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> +
> + phy_power_off(mipi_dsi->phy);
> +}
> +
> +static int
> +dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> + unsigned long mode_flags, u32 lanes, u32 format,
> + unsigned int *lane_mbps)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> +
> + *lane_mbps = mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate / 1000000;
> +
> + return 0;
> +}
> +
> +static int
> +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
> + struct dw_mipi_dsi_dphy_timing *timing)
> +{
> + /* TOFIX handle other cases */
> +
> + timing->clk_lp2hs = 37;
> + timing->clk_hs2lp = 135;
> + timing->data_lp2hs = 50;
> + timing->data_hs2lp = 3;
> +
> + return 0;
> +}
> +
> +static int
> +dw_mipi_dsi_get_esc_clk_rate(void *priv_data, unsigned int *esc_clk_rate)
> +{
> + *esc_clk_rate = 4; /* Mhz */
> +
> + return 0;
> +}
> +
> +static const struct dw_mipi_dsi_phy_ops meson_dw_mipi_dsi_phy_ops = {
> + .init = dw_mipi_dsi_phy_init,
> + .power_off = dw_mipi_dsi_phy_power_off,
> + .get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
> + .get_timing = dw_mipi_dsi_phy_get_timing,
> + .get_esc_clk_rate = dw_mipi_dsi_get_esc_clk_rate,
> +};
> +
> +/* Encoder */
> +
> +static void meson_mipi_dsi_encoder_destroy(struct drm_encoder *encoder)
> +{
> + drm_encoder_cleanup(encoder);
> +}
> +
> +static const struct drm_encoder_funcs meson_mipi_dsi_encoder_funcs = {
> + .destroy = meson_mipi_dsi_encoder_destroy,
> +};
> +
> +static int meson_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi =
> + encoder_to_meson_dw_mipi_dsi(encoder);
> +
> + switch (mipi_dsi->dsi_device->format) {
> + case MIPI_DSI_FMT_RGB888:
> + break;
> + case MIPI_DSI_FMT_RGB666:
> + break;
> + case MIPI_DSI_FMT_RGB666_PACKED:
> + case MIPI_DSI_FMT_RGB565:
> + default:
> + DRM_DEV_ERROR(mipi_dsi->dev,
> + "invalid pixel format %d\n",
> + mipi_dsi->dsi_device->format);
> + return -EINVAL;
> + };
> +
> + return 0;
> +}
> +
> +static void meson_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi =
> + encoder_to_meson_dw_mipi_dsi(encoder);
> + struct meson_drm *priv = mipi_dsi->priv;
> +
> + writel_relaxed(0, priv->io_base + _REG(ENCL_VIDEO_EN));
> +}
> +
> +static void meson_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi =
> + encoder_to_meson_dw_mipi_dsi(encoder);
> + struct meson_drm *priv = mipi_dsi->priv;
> +
> + writel_bits_relaxed(BIT(3), BIT(3),
> + priv->io_base + _REG(ENCL_VIDEO_MODE_ADV));
> + writel_relaxed(0, priv->io_base + _REG(ENCL_TST_EN));
> +}
> +
> +static void meson_dw_mipi_dsi_init(struct meson_dw_mipi_dsi *mipi_dsi)
> +{
> + writel_relaxed((1 << 4) | (1 << 5) | (0 << 6),
> + mipi_dsi->base + MIPI_DSI_TOP_CNTL);
> +
> + writel_bits_relaxed(0xf, 0xf,
> + mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
> + writel_bits_relaxed(0xf, 0,
> + mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
> +
> + writel_bits_relaxed(0x3, 0x3,
> + mipi_dsi->base + MIPI_DSI_TOP_CLK_CNTL);
> +
> + writel_relaxed(0, mipi_dsi->base + MIPI_DSI_TOP_MEM_PD);
> +}
> +
> +static void meson_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi = encoder_to_meson_dw_mipi_dsi(encoder);
> + unsigned int dpi_data_format, venc_data_width;
> + struct meson_drm *priv = mipi_dsi->priv;
> + int bpp;
> + u32 reg;
> +
> + mipi_dsi->mode_flags = mode->flags;
> +
> + bpp = mipi_dsi_pixel_format_to_bpp(mipi_dsi->dsi_device->format);
> +
> + phy_mipi_dphy_get_default_config(mode->clock * 1000,
> + bpp, mipi_dsi->dsi_device->lanes,
> + &mipi_dsi->phy_opts.mipi_dphy);
> +
> + phy_configure(mipi_dsi->phy, &mipi_dsi->phy_opts);
> +
> + switch (mipi_dsi->dsi_device->format) {
> + case MIPI_DSI_FMT_RGB888:
> + dpi_data_format = COLOR_24BIT;
> + venc_data_width = MIPI_DSI_VENC_COLOR_24B;
> + break;
> + case MIPI_DSI_FMT_RGB666:
> + dpi_data_format = COLOR_18BIT_CFG_2;
> + venc_data_width = MIPI_DSI_VENC_COLOR_18B;
> + break;
> + case MIPI_DSI_FMT_RGB666_PACKED:
> + case MIPI_DSI_FMT_RGB565:
> + /* invalid */
> + break;
> + };
> +
> + dw_mipi_dsi_set_vclk(mipi_dsi, mode);
> + meson_venc_mipi_dsi_mode_set(priv, mode);
> +
> + meson_encl_load_gamma(priv);
> +
> + writel_relaxed(0, priv->io_base + _REG(ENCL_VIDEO_EN));
> +
> + meson_dw_mipi_dsi_init(mipi_dsi);
> +
> + /* Configure Set color format for DPI register */
> + reg = readl_relaxed(mipi_dsi->base + MIPI_DSI_TOP_CNTL) &
> + ~(0xf<<BIT_DPI_COLOR_MODE) &
> + ~(0x7<<BIT_IN_COLOR_MODE) &
> + ~(0x3<<BIT_CHROMA_SUBSAMPLE);
> +
> + writel_relaxed(reg |
> + (dpi_data_format << BIT_DPI_COLOR_MODE) |
> + (venc_data_width << BIT_IN_COLOR_MODE) |
> + 0 << BIT_COMP0_SEL |
> + 1 << BIT_COMP1_SEL |
> + 2 << BIT_COMP2_SEL |
> + (mipi_dsi->mode_flags & DRM_MODE_FLAG_NHSYNC ? 0 : BIT(BIT_HSYNC_POL)) |
> + (mipi_dsi->mode_flags & DRM_MODE_FLAG_NVSYNC ? 0 : BIT(BIT_VSYNC_POL)),
> + mipi_dsi->base + MIPI_DSI_TOP_CNTL);
> +}
> +
> +static const struct drm_encoder_helper_funcs
> + meson_mipi_dsi_encoder_helper_funcs = {
> + .atomic_check = meson_mipi_dsi_encoder_atomic_check,
> + .disable = meson_mipi_dsi_encoder_disable,
> + .enable = meson_mipi_dsi_encoder_enable,
> + .mode_set = meson_mipi_dsi_encoder_mode_set,
> +};
> +
> +static int meson_dw_mipi_dsi_bind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
> + struct drm_device *drm = data;
> + struct meson_drm *priv = drm->dev_private;
> + struct drm_encoder *encoder;
> + int ret;
> +
> + /* Check before if we are supposed to have a sub-device... */
> + if (!mipi_dsi->dsi_device)
> + return -EPROBE_DEFER;
> +
> + encoder = &mipi_dsi->encoder;
> + mipi_dsi->priv = priv;
> +
> + /* Encoder */
> + ret = drm_encoder_init(drm, encoder, &meson_mipi_dsi_encoder_funcs,
> + DRM_MODE_ENCODER_DSI, "meson_mipi_dsi");
> + if (ret) {
> + dev_err(priv->dev, "Failed to init DSI encoder\n");
> + return ret;
> + }
> +
> + drm_encoder_helper_add(encoder, &meson_mipi_dsi_encoder_helper_funcs);
> +
> + encoder->possible_crtcs = BIT(0);
> +
> + ret = dw_mipi_dsi_bind(mipi_dsi->dmd, encoder);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
> + return ret;
> + }
> +
> + phy_init(mipi_dsi->phy);
> +
> + return 0;
> +}
> +
> +static void meson_dw_mipi_dsi_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
> +
> + dw_mipi_dsi_remove(mipi_dsi->dmd);
> +
> + phy_exit(mipi_dsi->phy);
> +}
> +
> +static const struct component_ops meson_dw_mipi_dsi_ops = {
> + .bind = meson_dw_mipi_dsi_bind,
> + .unbind = meson_dw_mipi_dsi_unbind,
> +};
Do you thought of non-component based meson DSI like STM DSI? It
require changes from meson drm but just to understand if you have any
such plan.
Thanks,
Jagan.
Powered by blists - more mailing lists