| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1641979444-11661-3-git-send-email-hammerh0314@gmail.com>
Date: Wed, 12 Jan 2022 17:24:04 +0800
From: Hammer Hsieh <hammerh0314@...il.com>
To: gregkh@...uxfoundation.org, robh+dt@...nel.org,
linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, jirislaby@...nel.org,
p.zabel@...gutronix.de
Cc: wells.lu@...plus.com, hammer.hsieh@...plus.com,
Hammer Hsieh <hammerh0314@...il.com>
Subject: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
Add Sunplus SoC UART Driver
Signed-off-by: Hammer Hsieh <hammerh0314@...il.com>
---
Changes in v6:
- Addressed all comments from Jiri Slaby and Greg KH.
MAINTAINERS | 1 +
drivers/tty/serial/Kconfig | 25 ++
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/sunplus-uart.c | 756 ++++++++++++++++++++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
5 files changed, 786 insertions(+)
create mode 100644 drivers/tty/serial/sunplus-uart.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c1362e..2dc2fe6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17949,6 +17949,7 @@ SUNPLUS UART DRIVER
M: Hammer Hsieh <hammerh0314@...il.com>
S: Maintained
F: Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
+F: drivers/tty/serial/sunplus-uart.c
SUPERH
M: Yoshinori Sato <ysato@...rs.sourceforge.jp>
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 131a6a5..0865da3 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1561,6 +1561,31 @@ config SERIAL_LITEUART_CONSOLE
and warnings and which allows logins in single user mode).
Otherwise, say 'N'.
+config SERIAL_SUNPLUS
+ tristate "Sunplus UART support"
+ depends on OF || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ Select this option if you would like to use Sunplus serial port on
+ Sunplus SoC SP7021.
+ If you enable this option, Sunplus serial ports in the system will
+ be registered as ttySUPx.
+ This driver can also be built as a module. If so, the module will be
+ called sunplus-uart.
+
+config SERIAL_SUNPLUS_CONSOLE
+ bool "Console on Sunplus UART"
+ depends on SERIAL_SUNPLUS
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Select this option if you would like to use a Sunplus UART as the
+ system console.
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySUPx".
+
endmenu
config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 7da0856..61cc8de 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_SERIAL_RDA) += rda-uart.o
obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o
obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o
obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o
+obj-$(CONFIG_SERIAL_SUNPLUS) += sunplus-uart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
new file mode 100644
index 0000000..8b7306d
--- /dev/null
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sunplus SoC UART driver
+ *
+ * Author: Hammer Hsieh <hammerh0314@...il.com>
+ */
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <asm/irq.h>
+
+/* Register offsets */
+#define SUP_UART_DATA 0x00
+#define SUP_UART_LSR 0x04
+#define SUP_UART_MSR 0x08
+#define SUP_UART_LCR 0x0C
+#define SUP_UART_MCR 0x10
+#define SUP_UART_DIV_L 0x14
+#define SUP_UART_DIV_H 0x18
+#define SUP_UART_ISC 0x1C
+#define SUP_UART_TX_RESIDUE 0x20
+#define SUP_UART_RX_RESIDUE 0x24
+
+/* Line Status Register bits */
+#define SUP_UART_LSR_BC BIT(5) /* break condition status */
+#define SUP_UART_LSR_FE BIT(4) /* frame error status */
+#define SUP_UART_LSR_OE BIT(3) /* overrun error status */
+#define SUP_UART_LSR_PE BIT(2) /* parity error status */
+#define SUP_UART_LSR_RX BIT(1) /* 1: receive fifo not empty */
+#define SUP_UART_LSR_TX BIT(0) /* 1: transmit fifo is not full */
+#define SUP_UART_LSR_TX_NOT_FULL 1
+#define SUP_UART_LSR_BRK_ERROR_BITS GENMASK(5, 2)
+
+/* Line Control Register bits */
+#define SUP_UART_LCR_SBC BIT(5) /* select break condition */
+
+/* Modem Control Register bits */
+#define SUP_UART_MCR_RI BIT(3) /* ring indicator */
+#define SUP_UART_MCR_DCD BIT(2) /* data carrier detect */
+
+/* Interrupt Status/Control Register bits */
+#define SUP_UART_ISC_RXM BIT(5) /* RX interrupt enable */
+#define SUP_UART_ISC_TXM BIT(4) /* TX interrupt enable */
+#define SUP_UART_ISC_RX BIT(1) /* RX interrupt status */
+#define SUP_UART_ISC_TX BIT(0) /* TX interrupt status */
+
+#define SUP_DUMMY_READ BIT(16) /* drop bytes received on a !CREAD port */
+#define SUP_UART_NR 5
+
+struct sunplus_uart_port {
+ struct uart_port port;
+ struct clk *clk;
+ struct reset_control *rstc;
+};
+
+static void sp_uart_put_char(struct uart_port *port, unsigned int ch)
+{
+ writel(ch, port->membase + SUP_UART_DATA);
+}
+
+static u32 sunplus_tx_buf_not_full(struct uart_port *port)
+{
+ unsigned int lsr = readl(port->membase + SUP_UART_LSR);
+
+ return (lsr & SUP_UART_LSR_TX) ? SUP_UART_LSR_TX_NOT_FULL : 0;
+}
+
+static unsigned int sunplus_tx_empty(struct uart_port *port)
+{
+ unsigned int lsr = readl(port->membase + SUP_UART_LSR);
+
+ return (lsr & UART_LSR_TEMT) ? TIOCSER_TEMT : 0;
+}
+
+static void sunplus_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned int mcr = readl(port->membase + SUP_UART_MCR);
+
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ else
+ mcr &= ~UART_MCR_DTR;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ else
+ mcr &= ~UART_MCR_RTS;
+
+ if (mctrl & TIOCM_CAR)
+ mcr |= SUP_UART_MCR_DCD;
+ else
+ mcr &= ~SUP_UART_MCR_DCD;
+
+ if (mctrl & TIOCM_RI)
+ mcr |= SUP_UART_MCR_RI;
+ else
+ mcr &= ~SUP_UART_MCR_RI;
+
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+ else
+ mcr &= ~UART_MCR_LOOP;
+
+ writel(mcr, port->membase + SUP_UART_MCR);
+}
+
+static unsigned int sunplus_get_mctrl(struct uart_port *port)
+{
+ unsigned int ret, mcr;
+
+ mcr = readl(port->membase + SUP_UART_MCR);
+
+ if (mcr & UART_MCR_DTR)
+ ret |= TIOCM_DTR;
+
+ if (mcr & UART_MCR_RTS)
+ ret |= TIOCM_RTS;
+
+ if (mcr & SUP_UART_MCR_DCD)
+ ret |= TIOCM_CAR;
+
+ if (mcr & SUP_UART_MCR_RI)
+ ret |= TIOCM_RI;
+
+ if (mcr & UART_MCR_LOOP)
+ ret |= TIOCM_LOOP;
+
+ return ret;
+}
+
+static void sunplus_stop_tx(struct uart_port *port)
+{
+ unsigned int isc;
+
+ isc = readl(port->membase + SUP_UART_ISC);
+ isc &= ~SUP_UART_ISC_TXM;
+ writel(isc, port->membase + SUP_UART_ISC);
+}
+
+static void sunplus_start_tx(struct uart_port *port)
+{
+ unsigned int isc;
+
+ isc = readl(port->membase + SUP_UART_ISC);
+ isc |= SUP_UART_ISC_TXM;
+ writel(isc, port->membase + SUP_UART_ISC);
+}
+
+static void sunplus_stop_rx(struct uart_port *port)
+{
+ unsigned int isc;
+
+ isc = readl(port->membase + SUP_UART_ISC);
+ isc &= ~SUP_UART_ISC_RXM;
+ writel(isc, port->membase + SUP_UART_ISC);
+}
+
+static void sunplus_break_ctl(struct uart_port *port, int ctl)
+{
+ unsigned long flags;
+ unsigned int lcr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ lcr = readl(port->membase + SUP_UART_LCR);
+
+ if (ctl)
+ lcr |= SUP_UART_LCR_SBC; /* start break */
+ else
+ lcr &= ~SUP_UART_LCR_SBC; /* stop break */
+
+ writel(lcr, port->membase + SUP_UART_LCR);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ sp_uart_put_char(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ sunplus_stop_tx(port);
+ return;
+ }
+
+ do {
+ sp_uart_put_char(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE;
+ port->icount.tx++;
+
+ if (uart_circ_empty(xmit))
+ break;
+ } while (sunplus_tx_buf_not_full(port));
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ sunplus_stop_tx(port);
+}
+
+static void receive_chars(struct uart_port *port)
+{
+ unsigned int lsr = readl(port->membase + SUP_UART_LSR);
+ unsigned int ch, flag;
+
+ do {
+ ch = readl(port->membase + SUP_UART_DATA);
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (unlikely(lsr & SUP_UART_LSR_BRK_ERROR_BITS)) {
+ if (lsr & SUP_UART_LSR_BC) {
+ lsr &= ~(SUP_UART_LSR_FE | SUP_UART_LSR_PE);
+ port->icount.brk++;
+ flag = TTY_BREAK;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (lsr & SUP_UART_LSR_PE) {
+ port->icount.parity++;
+ flag = TTY_PARITY;
+ } else if (lsr & SUP_UART_LSR_FE) {
+ port->icount.frame++;
+ flag = TTY_FRAME;
+ }
+
+ if (lsr & SUP_UART_LSR_OE)
+ port->icount.overrun++;
+ }
+
+ if (port->ignore_status_mask & SUP_DUMMY_READ)
+ goto ignore_char;
+
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, lsr, SUP_UART_LSR_OE, ch, flag);
+
+ignore_char:
+ lsr = readl(port->membase + SUP_UART_LSR);
+ } while (lsr & SUP_UART_LSR_RX);
+
+ tty_flip_buffer_push(&port->state->port);
+}
+
+static irqreturn_t sunplus_uart_irq(int irq, void *args)
+{
+ struct uart_port *port = args;
+ unsigned int isc;
+
+ spin_lock(&port->lock);
+
+ isc = readl(port->membase + SUP_UART_ISC);
+
+ if (isc & SUP_UART_ISC_RX)
+ receive_chars(port);
+
+ if (isc & SUP_UART_ISC_TX)
+ transmit_chars(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int sunplus_startup(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned int isc;
+ int ret;
+
+ ret = request_irq(port->irq, sunplus_uart_irq, 0, "sunplus_uart", port);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ isc |= SUP_UART_ISC_RXM;
+ writel(isc, port->membase + SUP_UART_ISC);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void sunplus_shutdown(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ writel(0, port->membase + SUP_UART_ISC);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ free_irq(port->irq, port);
+}
+
+static void sunplus_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *oldtermios)
+{
+ u32 ext, div, div_l, div_h, baud, lcr;
+ u32 clk = port->uartclk;
+ unsigned long flags;
+
+ baud = uart_get_baud_rate(port, termios, oldtermios, 0, port->uartclk / 16);
+
+ /* baud rate = uartclk / ((16 * divisor + 1) + divisor_ext) */
+ clk += baud >> 1;
+ div = clk / baud;
+ ext = div & 0x0F;
+ div = (div >> 4) - 1;
+ div_l = (div & 0xFF) | (ext << 12);
+ div_h = div >> 8;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ lcr = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ lcr = UART_LCR_WLEN7;
+ break;
+ default:
+ lcr = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ lcr |= UART_LCR_STOP;
+
+ if (termios->c_cflag & PARENB) {
+ lcr |= UART_LCR_PARITY;
+
+ if (!(termios->c_cflag & PARODD))
+ lcr |= UART_LCR_EPAR;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= SUP_UART_LSR_PE | SUP_UART_LSR_FE;
+
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SUP_UART_LSR_BC;
+
+ /* Characters to ignore */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SUP_UART_LSR_FE | SUP_UART_LSR_PE;
+
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= SUP_UART_LSR_BC;
+
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SUP_UART_LSR_OE;
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0) {
+ port->ignore_status_mask |= SUP_DUMMY_READ;
+ /* flush rx data FIFO */
+ writel(0, port->membase + SUP_UART_RX_RESIDUE);
+ }
+
+ /* Settings for baud rate divisor and lcr */
+ writel(div_h, port->membase + SUP_UART_DIV_H);
+ writel(div_l, port->membase + SUP_UART_DIV_L);
+ writel(lcr, port->membase + SUP_UART_LCR);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void sunplus_set_ldisc(struct uart_port *port, struct ktermios *termios)
+{
+ int new = termios->c_line;
+
+ if (new == N_PPS)
+ port->flags |= UPF_HARDPPS_CD;
+ else
+ port->flags &= ~UPF_HARDPPS_CD;
+}
+
+static const char *sunplus_type(struct uart_port *port)
+{
+ return port->type == PORT_SUNPLUS ? "sunplus_uart" : NULL;
+}
+
+static void sunplus_config_port(struct uart_port *port, int type)
+{
+ if (type & UART_CONFIG_TYPE)
+ port->type = PORT_SUNPLUS;
+}
+
+static int sunplus_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_SUNPLUS)
+ return -EINVAL;
+
+ return 0;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static void sunplus_poll_put_char(struct uart_port *port, unsigned char data)
+{
+ wait_for_xmitr(port);
+ sp_uart_put_char(port, data);
+}
+
+static int sunplus_poll_get_char(struct uart_port *port)
+{
+ unsigned int lsr = readl(port->membase + SUP_UART_LSR);
+
+ if (!(lsr & SUP_UART_LSR_RX))
+ return NO_POLL_CHAR;
+
+ return readl(port->membase + SUP_UART_DATA);
+}
+#endif
+
+static const struct uart_ops sunplus_uart_ops = {
+ .tx_empty = sunplus_tx_empty,
+ .set_mctrl = sunplus_set_mctrl,
+ .get_mctrl = sunplus_get_mctrl,
+ .stop_tx = sunplus_stop_tx,
+ .start_tx = sunplus_start_tx,
+ .stop_rx = sunplus_stop_rx,
+ .break_ctl = sunplus_break_ctl,
+ .startup = sunplus_startup,
+ .shutdown = sunplus_shutdown,
+ .set_termios = sunplus_set_termios,
+ .set_ldisc = sunplus_set_ldisc,
+ .type = sunplus_type,
+ .config_port = sunplus_config_port,
+ .verify_port = sunplus_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_put_char = sunplus_poll_put_char,
+ .poll_get_char = sunplus_poll_get_char,
+#endif
+};
+
+#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE
+struct sunplus_uart_port *sunplus_console_ports[SUP_UART_NR];
+
+static void wait_for_xmitr(struct uart_port *port)
+{
+ unsigned int val;
+ int ret;
+
+ /* Wait while FIFO is full or timeout */
+ ret = readl_poll_timeout_atomic(port->membase + SUP_UART_LSR, val,
+ (val & SUP_UART_LSR_TX), 1, 10000);
+
+ if (ret == -ETIMEDOUT) {
+ dev_err(port->dev, "Timeout waiting while UART TX FULL\n");
+ return;
+ }
+}
+
+static void sunplus_uart_console_putchar(struct uart_port *port, int ch)
+{
+ wait_for_xmitr(port);
+ sp_uart_put_char(port, ch);
+}
+
+static void sunplus_console_write(struct console *co,
+ const char *s,
+ unsigned int count)
+{
+ unsigned long flags;
+ int locked = 1;
+
+ local_irq_save(flags);
+
+ if (sunplus_console_ports[co->index]->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&sunplus_console_ports[co->index]->port.lock);
+ else
+ spin_lock(&sunplus_console_ports[co->index]->port.lock);
+
+ uart_console_write(&sunplus_console_ports[co->index]->port, s, count,
+ sunplus_uart_console_putchar);
+
+ if (locked)
+ spin_unlock(&sunplus_console_ports[co->index]->port.lock);
+
+ local_irq_restore(flags);
+}
+
+static int __init sunplus_console_setup(struct console *co, char *options)
+{
+ struct sunplus_uart_port *sup;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= SUP_UART_NR)
+ return -EINVAL;
+
+ sup = sunplus_console_ports[co->index];
+ if (!sup)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&sup->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver sunplus_uart_driver;
+static struct console sunplus_uart_console = {
+ .name = "ttySUP",
+ .write = sunplus_console_write,
+ .device = uart_console_device,
+ .setup = sunplus_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunplus_uart_driver
+};
+
+static int __init sunplus_console_init(void)
+{
+ register_console(&sunplus_uart_console);
+ return 0;
+}
+console_initcall(sunplus_console_init);
+#endif
+
+static struct uart_driver sunplus_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "sunplus_uart",
+ .dev_name = "ttySUP",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = SUP_UART_NR,
+ .cons = NULL,
+};
+
+static int sunplus_uart_probe(struct platform_device *pdev)
+{
+ struct sunplus_uart_port *sup;
+ struct uart_port *port;
+ struct resource *res;
+ int ret, irq;
+
+ pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
+
+ if (pdev->id < 0 || pdev->id >= SUP_UART_NR)
+ return -EINVAL;
+
+ sup = devm_kzalloc(&pdev->dev, sizeof(*sup), GFP_KERNEL);
+ if (!sup)
+ return -ENOMEM;
+
+ sup->clk = devm_clk_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(sup->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(sup->clk), "clk not found\n");
+
+ ret = clk_prepare_enable(sup->clk);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&pdev->dev,
+ (void(*)(void *))clk_disable_unprepare,
+ sup->clk);
+ if (ret)
+ return ret;
+
+ sup->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(sup->rstc))
+ return dev_err_probe(&pdev->dev, PTR_ERR(sup->rstc), "rstc not found\n");
+
+ port = &sup->port;
+
+ port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(port->membase))
+ return dev_err_probe(&pdev->dev, PTR_ERR(port->membase), "membase not found\n");
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ port->mapbase = res->start;
+ port->uartclk = clk_get_rate(sup->clk);
+ port->line = pdev->id;
+ port->irq = irq;
+ port->dev = &pdev->dev;
+ port->iotype = UPIO_MEM;
+ port->ops = &sunplus_uart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->fifosize = 128;
+
+ ret = reset_control_deassert(sup->rstc);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&pdev->dev,
+ (void(*)(void *))reset_control_assert,
+ sup->rstc);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE
+ sunplus_console_ports[sup->port.line] = sup;
+#endif
+
+ platform_set_drvdata(pdev, &sup->port);
+
+ ret = uart_add_one_port(&sunplus_uart_driver, &sup->port);
+#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE
+ if (ret)
+ sunplus_console_ports[sup->port.line] = NULL;
+#endif
+
+ return ret;
+}
+
+static int sunplus_uart_remove(struct platform_device *pdev)
+{
+ struct sunplus_uart_port *sup = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&sunplus_uart_driver, &sup->port);
+
+ return 0;
+}
+
+static int sunplus_uart_suspend(struct device *dev)
+{
+ struct sunplus_uart_port *sup = dev_get_drvdata(dev);
+
+ if (!uart_console(&sup->port))
+ uart_suspend_port(&sunplus_uart_driver, &sup->port);
+
+ return 0;
+}
+
+static int sunplus_uart_resume(struct device *dev)
+{
+ struct sunplus_uart_port *sup = dev_get_drvdata(dev);
+
+ if (!uart_console(&sup->port))
+ uart_resume_port(&sunplus_uart_driver, &sup->port);
+
+ return 0;
+}
+
+static const struct dev_pm_ops sunplus_uart_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(sunplus_uart_suspend, sunplus_uart_resume)
+};
+
+static const struct of_device_id sp_uart_of_match[] = {
+ { .compatible = "sunplus,sp7021-uart" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sp_uart_of_match);
+
+static struct platform_driver sunplus_uart_platform_driver = {
+ .probe = sunplus_uart_probe,
+ .remove = sunplus_uart_remove,
+ .driver = {
+ .name = "sunplus_uart",
+ .of_match_table = sp_uart_of_match,
+ .pm = &sunplus_uart_pm_ops,
+ }
+};
+
+static int __init sunplus_uart_init(void)
+{
+ int ret;
+
+#ifdef CONFIG_SERIAL_SUNPLUS_CONSOLE
+ sunplus_uart_driver.cons = &sunplus_uart_console;
+#endif
+
+ ret = uart_register_driver(&sunplus_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&sunplus_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&sunplus_uart_driver);
+
+ return ret;
+}
+module_init(sunplus_uart_init);
+
+static void __exit sunplus_uart_exit(void)
+{
+ platform_driver_unregister(&sunplus_uart_platform_driver);
+ uart_unregister_driver(&sunplus_uart_driver);
+}
+module_exit(sunplus_uart_exit);
+
+#ifdef CONFIG_SERIAL_EARLYCON
+static void sunplus_uart_putc(struct uart_port *port, int c)
+{
+ unsigned int val;
+ int ret;
+
+ ret = readl_poll_timeout_atomic(port->membase + SUP_UART_LSR, val,
+ (val & UART_LSR_TEMT), 1, 10000);
+ if (ret)
+ return;
+
+ writel(c, port->membase + SUP_UART_DATA);
+}
+
+static void sunplus_uart_early_write(struct console *con, const char *s, unsigned int n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, sunplus_uart_putc);
+}
+
+static int __init
+sunplus_uart_early_setup(struct earlycon_device *dev, const char *opt)
+{
+ if (!(dev->port.membase || dev->port.iobase))
+ return -ENODEV;
+
+ dev->con->write = sunplus_uart_early_write;
+
+ return 0;
+}
+OF_EARLYCON_DECLARE(sunplus_uart, "sunplus,sp7021-uart", sunplus_uart_early_setup);
+#endif
+
+MODULE_DESCRIPTION("Sunplus UART driver");
+MODULE_AUTHOR("Hammer Hsieh <hammerh0314@...il.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c4042dc..2dfe443 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -274,4 +274,7 @@
/* Freescale LINFlexD UART */
#define PORT_LINFLEXUART 122
+/* Sunplus UART */
+#define PORT_SUNPLUS 123
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
--
2.7.4
Powered by blists - more mailing lists