| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220112194118.178026-11-luca@z3ntu.xyz>
Date: Wed, 12 Jan 2022 20:40:59 +0100
From: Luca Weiss <luca@...tu.xyz>
To: linux-arm-msm@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Vladimir Lypak <vladimir.lypak@...il.com>,
Luca Weiss <luca@...tu.xyz>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 10/15] arm64: dts: qcom: Add MSM8953 device tree
From: Vladimir Lypak <vladimir.lypak@...il.com>
Add a base DT for MSM8953 SoC.
Co-developed-by: Luca Weiss <luca@...tu.xyz>
Signed-off-by: Vladimir Lypak <vladimir.lypak@...il.com>
Signed-off-by: Luca Weiss <luca@...tu.xyz>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 1337 +++++++++++++++++++++++++
1 file changed, 1337 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8953.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
new file mode 100644
index 000000000000..59918b527750
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -0,0 +1,1337 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &i2c_7;
+ i2c8 = &i2c_8;
+ };
+
+ chosen { };
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_1>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_1>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_1>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_1>;
+ #cooling-cells = <2>;
+
+ l1-icache {
+ compatible = "cache";
+ };
+ l1-dcache {
+ compatible = "cache";
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ L2_0: l2-cache_0 {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+
+ L2_1: l2-cache_1 {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-msm8953";
+ clocks = <&gcc GCC_CRYPTO_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ zap_shader_region: memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x81800000 0x0 0x2000>;
+ no-map;
+ };
+
+ memory@...00000 {
+ reg = <0x0 0x85b00000 0x0 0x800000>;
+ no-map;
+ };
+
+ smem_mem: memory@...00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x86300000 0x0 0x100000>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ hwlocks = <&tcsr_mutex 3>;
+ no-map;
+ };
+
+ memory@...00000 {
+ reg = <0x0 0x86400000 0x0 0x400000>;
+ no-map;
+ };
+
+ mpss_mem: memory@...00000 {
+ reg = <0x0 0x86c00000 0x0 0x6a00000>;
+ no-map;
+ };
+
+ adsp_fw_mem: memory@...00000 {
+ reg = <0x0 0x8d600000 0x0 0x1100000>;
+ no-map;
+ };
+
+ wcnss_fw_mem: memory@...00000 {
+ reg = <0x0 0x8e700000 0x0 0x700000>;
+ no-map;
+ };
+
+ memory@...00000 {
+ reg = <0 0x90000000 0 0x1000>;
+ no-map;
+ };
+
+ memory@...01000 {
+ reg = <0x0 0x90001000 0x0 0x13ff000>;
+ no-map;
+ };
+
+ venus_mem: memory@...00000 {
+ reg = <0x0 0x91400000 0x0 0x700000>;
+ no-map;
+ };
+
+ mba_mem: memory@...00000 {
+ reg = <0x0 0x92000000 0x0 0x100000>;
+ no-map;
+ };
+
+ memory@...00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xf2d00000 0x0 0x180000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+ };
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm_requests {
+ compatible = "qcom,rpm-msm8953";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: rpmcc {
+ compatible = "qcom,rpmcc-msm8953";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8953-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ clocks = <&xo_board>;
+ clock-names = "ref";
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-1 = <&apcs 8 13>;
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,smem-state-cells = <1>;
+ };
+ };
+
+ soc: soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rpm_msg_ram: sram@...00 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x60000 0x8000>;
+ };
+
+ hsusb_phy: phy@...00 {
+ compatible = "qcom,msm8953-qusb2-phy";
+ reg = <0x79000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_QUSB_REF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>;
+
+ resets = <&gcc GCC_QUSB2_PHY_BCR>;
+
+ status = "disabled";
+ };
+
+ rng@...00 {
+ compatible = "qcom,prng";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ tsens0: thermal-sensor@...000 {
+ compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ restart@...000 {
+ compatible = "qcom,pshold";
+ reg = <0x4ab000 0x4>;
+ };
+
+ tlmm: pinctrl@...0000 {
+ compatible = "qcom,msm8953-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 155>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart_console_active: uart-console-active-pins {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ uart_console_sleep: uart-console-sleep-pins {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sdc1_clk_on: sdc1-clk-on-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ sdc1_clk_off: sdc1-clk-off-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc1_cmd_on: sdc1-cmd-on-pins {
+ pins = "sdc1_cmd";
+ bias-disable;
+ drive-strength = <10>;
+ };
+
+ sdc1_cmd_off: sdc1-cmd-off-pins {
+ pins = "sdc1_cmd";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc1_data_on: sdc1-data-on-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc1_data_off: sdc1-data-off-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc1_rclk_on: sdc1-rclk-on-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+
+ sdc1_rclk_off: sdc1-rclk-off-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+
+ sdc2_clk_on: sdc2-clk-on-pins {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ sdc2_clk_off: sdc2-clk-off-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc2_cmd_on: sdc2-cmd-on-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_cmd_off: sdc2-cmd-off-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc2_data_on: sdc2-data-on-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_data_off: sdc2-data-off-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc2_cd_on: cd-on-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sdc2_cd_off: cd-off-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_key_default: gpio-key-default-pins {
+ pins = "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ i2c_1_default: i2c-1-default-pins {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_1_sleep: i2c-1-sleep-pins {
+ pins = "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_2_default: i2c-2-default-pins {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_2_sleep: i2c-2-sleep-pins {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_3_default: i2c-3-default-pins {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_3_sleep: i2c-3-sleep-pins {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_4_default: i2c-4-default-pins {
+ pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_4_sleep: i2c-4-sleep-pins {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_5_default: i2c-5-default-pins {
+ pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_5_sleep: i2c-5-sleep-pins {
+ pins = "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_6_default: i2c-6-default-pins {
+ pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_6_sleep: i2c-6-sleep-pins {
+ pins = "gpio22", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_7_default: i2c-7-default-pins {
+ pins = "gpio135", "gpio136";
+ function = "blsp_i2c7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_7_sleep: i2c-7-sleep-pins {
+ pins = "gpio135", "gpio136";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_8_default: i2c-8-default-pins {
+ pins = "gpio98", "gpio99";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c_8_sleep: i2c-8-sleep-pins {
+ pins = "gpio98", "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ gcc: clock-controller@...0000 {
+ compatible = "qcom,gcc-msm8953";
+ reg = <0x1800000 0x80000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&xo_board>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "sleep",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "dsi1pll",
+ "dsi1pllbyte";
+ };
+
+ tcsr_mutex: hwlock@...5000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x1905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@...7000 {
+ compatible = "qcom,tcsr-msm8953", "syscon";
+ reg = <0x1937000 0x30000>;
+ };
+
+ tcsr_phy_clk_scheme_sel: syscon@...f044 {
+ compatible = "syscon";
+ reg = <0x193f044 0x4>;
+ };
+
+ spmi_bus: spmi@...f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x200f000 0x1000>,
+ <0x2400000 0x800000>,
+ <0x2c00000 0x800000>,
+ <0x3800000 0x200000>,
+ <0x200a000 0x2100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ interrupt-controller;
+
+ #interrupt-cells = <4>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ usb3: usb@...8800 {
+ compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
+ reg = <0x70f8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_PCNOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface",
+ "mock_utmi", "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <133330000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "disabled";
+
+ usb3_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x07000000 0xcc00>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy>;
+ phy-names = "usb2-phy";
+
+ snps,usb2-gadget-lpm-disable;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x00>;
+
+ maximum-speed = "high-speed";
+ phy_mode = "utmi";
+ };
+ };
+
+ sdhc_1: sdhci@...4900 {
+ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+ reg = <0x7824900 0x500>, <0x7824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+
+ power-domains = <&rpmpd MSM8953_VDDCX>;
+ operating-points-v2 = <&sdhc1_opp_table>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
+
+ status = "disabled";
+
+ sdhc1_opp_table: opp-table-sdhc1 {
+ compatible = "operating-points-v2";
+
+ opp-25000000 {
+ opp-hz = /bits/ 64 <25000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
+ sdhc_2: sdhci@...4900 {
+ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+ reg = <0x7864900 0x500>, <0x7864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+
+ power-domains = <&rpmpd MSM8953_VDDCX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ bus-width = <4>;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table-sdhc2 {
+ compatible = "operating-points-v2";
+
+ opp-25000000 {
+ opp-hz = /bits/ 64 <25000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-177770000 {
+ opp-hz = /bits/ 64 <177770000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
+ uart_0: serial@...f000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ status = "disabled";
+ };
+
+ i2c_1: i2c@...5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_1_default>;
+ pinctrl-1 = <&i2c_1_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_2: i2c@...6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b6000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_2_default>;
+ pinctrl-1 = <&i2c_2_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_3: i2c@...7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_3_default>;
+ pinctrl-1 = <&i2c_3_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_4: i2c@...8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b8000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_4_default>;
+ pinctrl-1 = <&i2c_4_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_5: i2c@...5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x7af5000 0x600>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_5_default>;
+ pinctrl-1 = <&i2c_5_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_6: i2c@...6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x7af6000 0x600>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_6_default>;
+ pinctrl-1 = <&i2c_6_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_7: i2c@...7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x7af7000 0x600>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_7_default>;
+ pinctrl-1 = <&i2c_7_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_8: i2c@...8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x7af8000 0x600>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c_8_default>;
+ pinctrl-1 = <&i2c_8_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@...0000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ };
+
+ apcs: mailbox@...1000 {
+ compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
+ reg = <0xb011000 0x1000>;
+ #mbox-cells = <1>;
+ };
+
+ timer@...0000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xb120000 0x1000>;
+ #address-cells = <0x01>;
+ #size-cells = <0x01>;
+ ranges;
+
+ frame@...1000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb121000 0x1000>,
+ <0xb122000 0x1000>;
+ };
+
+ frame@...3000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@...4000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@...5000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@...6000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@...7000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@...8000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb128000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 9>;
+ trips {
+ cpu0_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 10>;
+ trips {
+ cpu1_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert>;
+ cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 11>;
+ trips {
+ cpu2_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 12>;
+ trips {
+ cpu3_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert>;
+ cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 4>;
+ trips {
+ cpu4_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu4_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 5>;
+ trips {
+ cpu5_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu5_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert>;
+ cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 6>;
+ trips {
+ cpu6_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu6_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 7>;
+ trips {
+ cpu7_alert: trip-point0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu7_crit: crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert>;
+ cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.34.1
Powered by blists - more mailing lists