linux-kernel - [PATCH 00/15] Initial MSM8953 & Fairphone 3 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 12 Jan 2022 20:40:49 +0100
From:   Luca Weiss <luca@...tu.xyz>
To:     linux-arm-msm@...r.kernel.org
Cc:     ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
        Luca Weiss <luca@...tu.xyz>, Amit Kucheria <amitk@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Manu Gautam <mgautam@...eaurora.org>,
        Stephen Boyd <sboyd@...eaurora.org>,
        Zhang Rui <rui.zhang@...el.com>, devicetree@...r.kernel.org,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mmc@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-pm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
        linux-usb@...r.kernel.org
Subject: [PATCH 00/15] Initial MSM8953 & Fairphone 3 support

This series adds initial support for MSM8953 (and SDM632 which is based
on MSM8953) and the Fairphone 3 smartphone.

Only relatively basic functionality is supported like storage, volume
keys and USB.

There is currently close-to-mainline support for other components for
this SoC including GPU, WiFi and audio, this series adds only basic
support so that the other components can start getting upstreamed
easier.

Luca Weiss (10):
  dt-bindings: phy: qcom,qusb2: Document msm8953 compatible
  phy: qcom-qusb2: Add compatible for MSM8953
  dt-bindings: mfd: qcom,tcsr: Document msm8953 compatible
  mfd: qcom-spmi-pmic: Add pm8953 compatible
  dt-bindings: mmc: sdhci-msm: Add msm8953 compatible
  dt-bindings: thermal: tsens: Add msm8953 compatible
  dt-bindings: usb: qcom,dwc3: Add msm8953 compatible
  dt-bindings: pinctrl: qcom: msm8953: allow gpio-reserved-ranges
  dt-bindings: arm: qcom: Document sdm632 and fairphone,fp3 board
  arm64: dts: qcom: sdm632: Add device tree for Fairphone 3

Vladimir Lypak (5):
  rpmsg: smd: Drop unnecessary condition for channel creation
  arm64: dts: qcom: Add MSM8953 device tree
  arm64: dts: qcom: Add PM8953 PMIC
  arm64: dts: qcom: Add SDM632 device tree
  arm64: dts: qcom: Add MSM8953+PM8953 device tree

 .../devicetree/bindings/arm/qcom.yaml         |    6 +
 .../bindings/mfd/qcom,spmi-pmic.txt           |    1 +
 .../devicetree/bindings/mfd/qcom,tcsr.txt     |    1 +
 .../devicetree/bindings/mmc/sdhci-msm.txt     |    1 +
 .../bindings/phy/qcom,qusb2-phy.yaml          |    1 +
 .../pinctrl/qcom,msm8953-pinctrl.yaml         |    2 +
 .../bindings/thermal/qcom-tsens.yaml          |    1 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi  |   50 +
 arch/arm64/boot/dts/qcom/msm8953.dtsi         | 1337 +++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8953.dtsi          |   90 ++
 .../boot/dts/qcom/sdm632-fairphone-fp3.dts    |  189 +++
 arch/arm64/boot/dts/qcom/sdm632.dtsi          |  125 ++
 drivers/phy/qualcomm/phy-qcom-qusb2.c         |    3 +
 drivers/rpmsg/qcom_smd.c                      |    8 +-
 16 files changed, 1810 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm8953.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm632.dtsi

-- 
2.34.1