lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFrASmBKRLLvWS-TUBdrtgPieuu1p0jco+qAuWo6HV2E=A@mail.gmail.com>
Date:   Fri, 14 Jan 2022 13:35:47 +0100
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Maulik Shah <quic_mkshah@...cinc.com>
Cc:     bjorn.andersson@...aro.org, linux-arm-msm@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
        rafael@...nel.org, daniel.lezcano@...aro.org,
        quic_lsrao@...cinc.com, quic_rjendra@...cinc.com
Subject: Re: [PATCH 09/10] soc: qcom: rpmh-rsc: Save base address of drv

On Sun, 9 Jan 2022 at 18:26, Maulik Shah <quic_mkshah@...cinc.com> wrote:
>
> Add changes to save drv's base address for rsc. This is
> used to read drv's configuration such as solver mode is
> supported or to write into CONTROL_TCS registers.
>
> Signed-off-by: Maulik Shah <quic_mkshah@...cinc.com>

Reviewed-by: Ulf Hansson <ulf.hansson@...aro.org>

Kind regards
Uffe

> ---
>  drivers/soc/qcom/rpmh-internal.h |  2 ++
>  drivers/soc/qcom/rpmh-rsc.c      | 18 ++++++++----------
>  2 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
> index 32ac117..6770bbb 100644
> --- a/drivers/soc/qcom/rpmh-internal.h
> +++ b/drivers/soc/qcom/rpmh-internal.h
> @@ -91,6 +91,7 @@ struct rpmh_ctrlr {
>   * Resource State Coordinator controller (RSC)
>   *
>   * @name:               Controller identifier.
> + * @base:               Start address of the DRV registers in this controller.
>   * @tcs_base:           Start address of the TCS registers in this controller.
>   * @id:                 Instance id in the controller (Direct Resource Voter).
>   * @num_tcs:            Number of TCSes in this DRV.
> @@ -115,6 +116,7 @@ struct rpmh_ctrlr {
>   */
>  struct rsc_drv {
>         const char *name;
> +       void __iomem *base;
>         void __iomem *tcs_base;
>         int id;
>         int num_tcs;
> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
> index 5875ad5..c2a7c6c 100644
> --- a/drivers/soc/qcom/rpmh-rsc.c
> +++ b/drivers/soc/qcom/rpmh-rsc.c
> @@ -882,8 +882,7 @@ static int rpmh_rsc_pd_attach(struct rsc_drv *drv, struct device *dev)
>         return dev_pm_genpd_add_notifier(dev, &drv->genpd_nb);
>  }
>
> -static int rpmh_probe_tcs_config(struct platform_device *pdev,
> -                                struct rsc_drv *drv, void __iomem *base)
> +static int rpmh_probe_tcs_config(struct platform_device *pdev, struct rsc_drv *drv)
>  {
>         struct tcs_type_config {
>                 u32 type;
> @@ -897,9 +896,9 @@ static int rpmh_probe_tcs_config(struct platform_device *pdev,
>         ret = of_property_read_u32(dn, "qcom,tcs-offset", &offset);
>         if (ret)
>                 return ret;
> -       drv->tcs_base = base + offset;
> +       drv->tcs_base = drv->base + offset;
>
> -       config = readl_relaxed(base + DRV_PRNT_CHLD_CONFIG);
> +       config = readl_relaxed(drv->base + DRV_PRNT_CHLD_CONFIG);
>
>         max_tcs = config;
>         max_tcs &= DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->id);
> @@ -961,7 +960,6 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
>         char drv_id[10] = {0};
>         int ret, irq;
>         u32 solver_config;
> -       void __iomem *base;
>
>         /*
>          * Even though RPMh doesn't directly use cmd-db, all of its children
> @@ -988,11 +986,11 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
>                 drv->name = dev_name(&pdev->dev);
>
>         snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
> -       base = devm_platform_ioremap_resource_byname(pdev, drv_id);
> -       if (IS_ERR(base))
> -               return PTR_ERR(base);
> +       drv->base = devm_platform_ioremap_resource_byname(pdev, drv_id);
> +       if (IS_ERR(drv->base))
> +               return PTR_ERR(drv->base);
>
> -       ret = rpmh_probe_tcs_config(pdev, drv, base);
> +       ret = rpmh_probe_tcs_config(pdev, drv);
>         if (ret)
>                 return ret;
>
> @@ -1015,7 +1013,7 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
>          * 'HW solver' mode where they can be in autonomous mode executing low
>          * power mode to power down.
>          */
> -       solver_config = readl_relaxed(base + DRV_SOLVER_CONFIG);
> +       solver_config = readl_relaxed(drv->base + DRV_SOLVER_CONFIG);
>         solver_config &= DRV_HW_SOLVER_MASK << DRV_HW_SOLVER_SHIFT;
>         solver_config = solver_config >> DRV_HW_SOLVER_SHIFT;
>         if (!solver_config) {
> --
> 2.7.4
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ