[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <da5c9727-45c6-f2be-5a31-2214d0d1e9c0@canonical.com>
Date: Sat, 15 Jan 2022 17:50:30 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Marcel Ziswiler <marcel@...wiler.com>,
linux-arm-kernel@...ts.infradead.org
Cc: Marek Vasut <marek.vasut@...il.com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Alex Marginean <alexandru.marginean@....com>,
Alexander Stein <alexander.stein@...tq-group.com>,
Arnd Bergmann <arnd@...db.de>, Chester Lin <clin@...e.com>,
Dong Aisheng <aisheng.dong@....com>,
Fabio Estevam <festevam@...il.com>,
Frank Rowand <frowand.list@...il.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Michael Walle <michael@...le.cc>,
NXP Linux Team <linux-imx@....com>,
Olof Johansson <olof@...om.net>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Tim Harvey <tharvey@...eworks.com>,
Vladimir Oltean <vladimir.oltean@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 11/11] arm64: dts: freescale: add initial support for
verdin imx8m mini
On 14/01/2022 15:15, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
>
> This patch adds the device tree to support Toradex Verdin iMX8M Mini a
> computer on module which can be used on different carrier boards.
>
> The module consists of an NXP i.MX 8M Mini family SoC (either i.MX 8M
> Mini Quad or 8M Mini DualLite), a PCA9450A PMIC, a Gigabit Ethernet PHY,
> 1 or 2 GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an
> RX8130 RTC, an optional SPI CAN controller plus an optional Bluetooth/
> Wi-Fi module.
>
> Anything that is not self-contained on the module is disabled by
> default.
>
> The device tree for the Dahlia includes the module's device tree and
> enables the supported peripherals of the carrier board.
>
> The device tree for the Verdin Development Board includes the module's
> device tree as well as the Dahlia one as it is a superset and supports
> almost all peripherals available.
>
> So far there is no display functionality supported at all but basic
> console UART, USB host, eMMC and Ethernet and PCIe functionality work
> fine.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
>
> ---
>
> Changes in v2:
> - Remove bootargs which will be filled in by the bootloader as requested
> by Krzysztof.
> - Remove the previously #ifdefed-out spi-nor as requested by Krzysztof.
> - Fix capitalisation in cover-letter.
>
Thanks for the changes.
Looks, good but I did not perform review thorough enough to give a
Reviewed-by tag, so let it be just:
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Best regards,
Krzysztof
Powered by blists - more mailing lists