linux-kernel - Re: [ASUS EC Sensors V6 v6 0/3]

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2613447.mvXUDI8C0e@natalenko.name>
Date:   Mon, 17 Jan 2022 08:21:55 +0100
From:   Oleksandr Natalenko <oleksandr@...alenko.name>
To:     Eugene Shalygin <eugene.shalygin@...il.com>
Cc:     andy.shevchenko@...il.com, pauk.denis@...il.com,
        Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org
Subject: Re: [ASUS EC Sensors V6 v6 0/3]

Hello.

On neděle 16. ledna 2022 21:18:38 CET Eugene Shalygin wrote:
> This patchset replaces the HWMON asus_wmi_ec_sensors driver with
> an implementation that does not use WMI but queries the embedded
> controller directly.
> 
> That provides two enhancements: sensor reading became quicker (on some
> systems or kernel configuration it took almost a full second to read
> all the sensors, that transfers less than 15 bytes of data), the driver
> became more fexible. The driver now relies on ACPI mutex to lock access
> to the EC, in the same way as the WMI DSDT code does.
> 
> Changes in v6:
>  - Fixed hwmon device name replacing dashes with underscores.
>  - Removed module verion.
>  - Fixed condition for asus_wmi_ec_Sensors in KBuild.

For the series:

Tested-by: Oleksandr Natalenko <oleksandr@...alenko.name>

> Changes in v5:
>  - Place the sensors bitset directly into the driver_data field of the
>          dmi_system_id struct.
>  - Replace doc comments with regular ones.
> 
> Changes in v4:
>  - Deprecate the wmi driver rather than removing it.
> 
> Changes in v3:
>  - Remove BIOS version checks and BIOS version dependent mutex path.
> 
> Changes in v2:
>  - Replace sensor flags enum with bitset
>  - Replace module init/probe functions with module_platform_driver_probe
>    and ask the platform drivers framework to load the driver when ACPI
>    EC is found (ACPI ID "PNP0C09").
>  - Extend board data with BIOS version attribute for the mutex path to be
>    BIOS version dependent.
>  - Add module parameter to override the mutex path.
> 
> Eugene Shalygin (3):
>   hwmon: (asus-ec-sensors) add driver for ASUS EC
>   hwmon: (asus-ec-sensors) update documentation
>   hwmon: deprecate asis_wmi_ec_sensors driver
> 
>  Documentation/hwmon/asus_ec_sensors.rst     |  51 ++
>  Documentation/hwmon/asus_wmi_ec_sensors.rst |  38 --
>  MAINTAINERS                                 |   6 +
>  drivers/hwmon/Kconfig                       |  16 +-
>  drivers/hwmon/Makefile                      |   1 +
>  drivers/hwmon/asus-ec-sensors.c             | 690 ++++++++++++++++++++
>  6 files changed, 763 insertions(+), 39 deletions(-)
>  create mode 100644 Documentation/hwmon/asus_ec_sensors.rst
>  delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst
>  create mode 100644 drivers/hwmon/asus-ec-sensors.c

Thanks.

-- 
Oleksandr Natalenko (post-factum)