[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YeU1kDee7L26QJ86@oden.dyn.berto.se>
Date: Mon, 17 Jan 2022 10:23:28 +0100
From: Niklas Söderlund
<niklas.soderlund@...natech.se>
To: Jacopo Mondi <jacopo@...ndi.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>,
linux-media@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] media: dt-bindings: media: renesas,csi2: Update
data-lanes property
Hello Jacopo,
On 2022-01-17 09:11:10 +0100, Jacopo Mondi wrote:
> Hello Prabhakar,
>
> On Thu, Jan 13, 2022 at 10:32:14AM +0000, Lad Prabhakar wrote:
> > CSI-2 (CSI4LNK0) on R-Car and RZ/G2 supports 4-lane mode which is already
> > handled by rcar-csi2.c driver. This patch updates the data-lanes property
> > to describe the same.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> > .../devicetree/bindings/media/renesas,csi2.yaml | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> > index e6a036721082..064a0a4c5737 100644
> > --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> > +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> > @@ -67,7 +67,14 @@ properties:
> > maxItems: 1
> >
> > data-lanes:
> > - maxItems: 1
> > + items:
> > + minItems: 1
> > + maxItems: 4
> > + items:
> > + - const: 1
> > + - const: 2
> > + - const: 3
> > + - const: 4
>
> Seeing "maxItems: 1" there confuses me too, as the property is an
> array of data-lanes, but I'm afraid your change does not what you
> intend as it would allow you to specify the number of data lanes as an
> integer rather than as an array.
>
> I think it would probably be correct to set
>
> data-lanes: true
>
> (maybe maxItems: 1 is correct already)
>
> And restrict the number of valid combinations in the board DTS file
> with a construct like:
>
> data-lanes:
> oneOf:
> - items:
> - const: 1
> - const: 2
> - const: 3
> - const: 4
> - items:
> - const: 1
> - const: 2
I don't think this is correct, what if data lanes 2 and 3 are used?
>
> Thanks
> j
>
> >
> > required:
> > - clock-lanes
> > --
> > 2.17.1
> >
--
Kind Regards,
Niklas Söderlund
Powered by blists - more mailing lists