| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c04086b8-7948-c1d9-56ee-e20455e8c92b@roeck-us.net>
Date: Mon, 17 Jan 2022 09:01:16 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Marcello Sylvester Bauer <sylv@...v.io>,
linux-hwmon@...r.kernel.org
Cc: Patrick Rudolph <patrick.rudolph@...ements.com>,
Jean Delvare <jdelvare@...e.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 4/4] pmbus: Add support for bcm6123 Bus Converter
On 1/17/22 8:12 AM, Marcello Sylvester Bauer wrote:
> From: Patrick Rudolph <patrick.rudolph@...ements.com>
>
> BCM6123 is an Fixed-Ratio DC-DC Converter.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@...ements.com>
> Signed-off-by: Marcello Sylvester Bauer <sylv@...v.io>
> ---
> drivers/hwmon/pmbus/Kconfig | 9 ++++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/bcm6123.c | 90 +++++++++++++++++++++++++++++++++++
Documentation/hwmon/bcm6123 is missing.
> 3 files changed, 100 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/bcm6123.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index c96f7b7338bd..62dac90631c5 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -48,6 +48,15 @@ config SENSORS_ADM1275
> This driver can also be built as a module. If so, the module will
> be called adm1275.
>
> +config SENSORS_BCM6123
> + tristate "Vicor BCM6123 Compatible Power Supplies"
Is this a power supply or a chip ? It can't be both.
> + help
> + If you say yes here you get hardware monitoring support for Vicor
> + BCM6123 Power Supplies.
> +
> + This driver can also be built as a module. If so, the module will
> + be called bcm6123.
> +
> config SENSORS_BEL_PFE
> tristate "Bel PFE Compatible Power Supplies"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index e5935f70c9e0..2918c2ea7bc5 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_BCM6123) += bcm6123.o
> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
> obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
> obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
> diff --git a/drivers/hwmon/pmbus/bcm6123.c b/drivers/hwmon/pmbus/bcm6123.c
> new file mode 100644
> index 000000000000..78fc259bc40f
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/bcm6123.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Infineon bcm6123
> + *
Infineon ?
> + * Copyright (c) 2021 9elements GmbH
> + *
> + * VOUT_MODE is not supported by the device. The driver fakes VOUT linear16
> + * mode with exponent value -8 as direct mode with m=256/b=0/R=0.
> + *
Does it not ? The datasheet doesn't say, and the code below doesn't match
this description.
> + * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however
> + * this driver does not currently support them.
Does it ? There is no reference for this in the datasheet.
Overall it seems like there is a lot of cut-and-paste. Please clean this up.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pmbus.h>
> +#include "pmbus.h"
> +
> +static struct pmbus_platform_data bcm6123_plat_data = {
> + .flags = PMBUS_NO_CAPABILITY,
> +};
We should only set this flag if it is really needed.
> +
> +static struct pmbus_driver_info bcm6123_info = {
> + .pages = 2,
> + .format[PSC_VOLTAGE_IN] = direct,
> + .format[PSC_VOLTAGE_OUT] = direct,
> + .format[PSC_CURRENT_IN] = direct,
> + .format[PSC_CURRENT_OUT] = direct,
> + .format[PSC_POWER] = linear,
> + .format[PSC_TEMPERATURE] = linear,
> + .m[PSC_VOLTAGE_IN] = 1,
> + .b[PSC_VOLTAGE_IN] = 0,
> + .R[PSC_VOLTAGE_IN] = 1,
> + .m[PSC_VOLTAGE_OUT] = 1,
> + .b[PSC_VOLTAGE_OUT] = 0,
> + .R[PSC_VOLTAGE_OUT] = 1,
> + .m[PSC_CURRENT_IN] = 1,
> + .b[PSC_CURRENT_IN] = 0,
> + .R[PSC_CURRENT_IN] = 3,
> + .m[PSC_CURRENT_OUT] = 1,
> + .b[PSC_CURRENT_OUT] = 0,
> + .R[PSC_CURRENT_OUT] = 2,
> + .func[0] = 0, /* Summing page without voltage readings */
This needs further explanation. The public datasheet doesn't say anything
about multiple pages, and it doesn't really make much sense to have an
"empty" page with no information in it.
> + .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
> + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
> + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
> + | PMBUS_HAVE_IIN | PMBUS_HAVE_POUT,
> +};
> +
> +static int bcm6123_probe(struct i2c_client *client)
> +{
> + client->dev.platform_data = &bcm6123_plat_data;
> +
> + return pmbus_do_probe(client, &bcm6123_info);
> +}
> +
> +static const struct i2c_device_id bcm6123_id[] = {
> + {"bcm6123", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, bcm6123_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id bcm6123_of_match[] = {
> + { .compatible = "vicor,bcm6123" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bcm6123_of_match);
> +#endif
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver bcm6123_driver = {
> + .driver = {
> + .name = "bcm6123",
> + .of_match_table = of_match_ptr(bcm6123_of_match),
> + },
> + .probe_new = bcm6123_probe,
> + .id_table = bcm6123_id,
> +};
> +
> +module_i2c_driver(bcm6123_driver);
> +
> +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@...ements.com>");
> +MODULE_DESCRIPTION("PMBus driver for Vicor bcm6123");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists