linux-kernel - [v3 2/3] drm/msm/dsi: Add dsi phy tuning configuration support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1642538320-1127-3-git-send-email-quic_rajeevny@quicinc.com>
Date:   Wed, 19 Jan 2022 02:08:39 +0530
From:   Rajeev Nandan <quic_rajeevny@...cinc.com>
To:     dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc:     Rajeev Nandan <quic_rajeevny@...cinc.com>,
        linux-kernel@...r.kernel.org, sean@...rly.run, robdclark@...il.com,
        robh+dt@...nel.org, robh@...nel.org, quic_abhinavk@...cinc.com,
        quic_kalyant@...cinc.com, quic_mkrishn@...cinc.com,
        jonathan@...ek.ca, dmitry.baryshkov@...aro.org, airlied@...ux.ie,
        daniel@...ll.ch, swboyd@...omium.org
Subject: [v3 2/3] drm/msm/dsi: Add dsi phy tuning configuration support

Add support for MSM DSI PHY tuning configuration. Current design is
to support drive strength and drive level/amplitude tuning for
10nm PHY version, but this can be extended to other PHY versions.

Signed-off-by: Rajeev Nandan <quic_rajeevny@...cinc.com>
---

Changes in v2:
 - New.
 - Split into generic code and 10nm-specific part (Dmitry Baryshkov)

Changes in v3:
 - s/ops.tuning_cfg_init/ops.parse_dt_properties
   To parse phy version specific DT properties (Dmitry Baryshkov)
 - Address comments for phy tuning data structure (Dmitry Baryshkov)


 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 6 ++++++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 4 ++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 8c65ef6..fcbca76 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -739,6 +739,12 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (phy->cfg->ops.parse_dt_properties) {
+		ret = phy->cfg->ops.parse_dt_properties(phy);
+		if (ret)
+			goto fail;
+	}
+
 	ret = dsi_phy_regulator_init(phy);
 	if (ret)
 		goto fail;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index b91303a..9e08081 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -25,6 +25,7 @@ struct msm_dsi_phy_ops {
 	void (*save_pll_state)(struct msm_dsi_phy *phy);
 	int (*restore_pll_state)(struct msm_dsi_phy *phy);
 	bool (*set_continuous_clock)(struct msm_dsi_phy *phy, bool enable);
+	int (*parse_dt_properties)(struct msm_dsi_phy *phy);
 };
 
 struct msm_dsi_phy_cfg {
@@ -81,6 +82,8 @@ struct msm_dsi_dphy_timing {
 #define DSI_PIXEL_PLL_CLK		1
 #define NUM_PROVIDED_CLKS		2
 
+#define DSI_LANE_MAX			5
+
 struct msm_dsi_phy {
 	struct platform_device *pdev;
 	void __iomem *base;
@@ -98,6 +101,7 @@ struct msm_dsi_phy {
 
 	struct msm_dsi_dphy_timing timing;
 	const struct msm_dsi_phy_cfg *cfg;
+	void *tuning_cfg;
 
 	enum msm_dsi_phy_usecase usecase;
 	bool regulator_ldo_mode;
-- 
2.7.4