linux-kernel - [PATCH v3 2/3] staging: pi433: change order in which driver config the rf69 chip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220118230502.GA4897@mail.google.com>
Date:   Wed, 19 Jan 2022 12:05:02 +1300
From:   Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@...il.com>
To:     gregkh@...uxfoundation.org, paulo.miguel.almeida.rodenas@...il.com,
        realwakka@...il.com
Cc:     linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: [PATCH v3 2/3] staging: pi433: change order in which driver config
 the rf69 chip

There is an explicit dependency between modulation and bit rate
configurations. To ensure proper validation of input value for the
set_bit_rate routine, we must ensure that modulation has been set
before.

This patch ensures that set_modulation is always called before
set_bit_rate for both RX and TX routines

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@...il.com>
---
 drivers/staging/pi433/pi433_if.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index f9f86e2c44a9..17ff51f6a9da 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -167,10 +167,10 @@ rf69_set_rx_cfg(struct pi433_device *dev, struct pi433_rx_cfg *rx_cfg)
 	ret = rf69_set_frequency(dev->spi, rx_cfg->frequency);
 	if (ret < 0)
 		return ret;
-	ret = rf69_set_bit_rate(dev->spi, rx_cfg->bit_rate);
+	ret = rf69_set_modulation(dev->spi, rx_cfg->modulation);
 	if (ret < 0)
 		return ret;
-	ret = rf69_set_modulation(dev->spi, rx_cfg->modulation);
+	ret = rf69_set_bit_rate(dev->spi, rx_cfg->bit_rate);
 	if (ret < 0)
 		return ret;
 	ret = rf69_set_antenna_impedance(dev->spi, rx_cfg->antenna_impedance);
@@ -290,10 +290,10 @@ rf69_set_tx_cfg(struct pi433_device *dev, struct pi433_tx_cfg *tx_cfg)
 	ret = rf69_set_frequency(dev->spi, tx_cfg->frequency);
 	if (ret < 0)
 		return ret;
-	ret = rf69_set_bit_rate(dev->spi, tx_cfg->bit_rate);
+	ret = rf69_set_modulation(dev->spi, tx_cfg->modulation);
 	if (ret < 0)
 		return ret;
-	ret = rf69_set_modulation(dev->spi, tx_cfg->modulation);
+	ret = rf69_set_bit_rate(dev->spi, tx_cfg->bit_rate);
 	if (ret < 0)
 		return ret;
 	ret = rf69_set_deviation(dev->spi, tx_cfg->dev_frequency);
-- 
2.25.4