[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YeZ7jjzaLIioOGZo@pengutronix.de>
Date: Tue, 18 Jan 2022 09:34:22 +0100
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Dario Binacchi <dario.binacchi@...rulasolutions.com>
Cc: linux-kernel@...r.kernel.org,
Michael Trimarchi <michael@...rulasolutions.com>,
Boris Brezillon <bbrezillon@...nel.org>,
Fabio Estevam <festevam@...il.com>, Han Xu <han.xu@....com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Richard Weinberger <richard@....at>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mtd@...ts.infradead.org
Subject: Re: [RFC PATCH v3 0/4] Fix and improve gpmi nand on mx28
On Mon, Jan 17, 2022 at 05:17:51PM +0100, Dario Binacchi wrote:
> Starting from [1], the series fixes the timings setting of the gpmi
> controller for the mx28 architecture, also adding support for fast
> edo mode timings. The whole series has been heavily tested with the
> mtd kernel test modules, and with repeated write cycles on nand.
>
> [1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
>
> Changes in v3:
> - Remove the "mtd: rawnand: gpmi: use a table to get EDO mode setup" patch.
> - Simplify the validation logic (suggested by Sascha Hauer <sha@...gutronix.de>).
Thanks Dario. I gave it a test on a custom i.MX28 board and it works as
expected.
For the series:
Tested-by: Sascha Hauer <s.hauer@...gutronix.de>
Reviewed-by: Sascha Hauer <s.hauer@...gutronix.de>
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists