[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220119015627.2443334-1-robh@kernel.org>
Date: Tue, 18 Jan 2022 19:56:26 -0600
From: Rob Herring <robh@...nel.org>
To: Rui Miguel Silva <rmfrfs@...il.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Martin Kepplinger <martin.kepplinger@...i.sm>,
Sriram Dash <sriram.dash@...sung.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-can@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH] dt-bindings: Fix array schemas encoded as matrices
The YAML DT encoding has leaked into some array properties. Properties
which are defined as an array should have a schema that's just an array.
That means there should only be a single level of 'minItems',
'maxItems', and/or 'items'.
Signed-off-by: Rob Herring <robh@...nel.org>
---
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 12 ++--
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 12 ++--
.../bindings/net/can/bosch,m_can.yaml | 52 ++++++++--------
.../bindings/net/ethernet-controller.yaml | 59 +++++++++----------
4 files changed, 62 insertions(+), 73 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 1ef849dc74d7..e2e6e9aa0fe6 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -81,14 +81,12 @@ properties:
data-lanes:
description:
Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+ minItems: 1
items:
- minItems: 1
- maxItems: 4
- items:
- - const: 1
- - const: 2
- - const: 3
- - const: 4
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
required:
- data-lanes
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index d13c9233a7c8..2a14e3b0e004 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -87,14 +87,12 @@ properties:
properties:
data-lanes:
+ minItems: 1
items:
- minItems: 1
- maxItems: 4
- items:
- - const: 1
- - const: 2
- - const: 3
- - const: 4
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
required:
- data-lanes
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index fb547e26c676..401ab7cdb379 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -76,33 +76,31 @@ properties:
M_CAN user manual for details.
$ref: /schemas/types.yaml#/definitions/int32-array
items:
- items:
- - description: The 'offset' is an address offset of the Message RAM where
- the following elements start from. This is usually set to 0x0 if
- you're using a private Message RAM.
- default: 0
- - description: 11-bit Filter 0-128 elements / 0-128 words
- minimum: 0
- maximum: 128
- - description: 29-bit Filter 0-64 elements / 0-128 words
- minimum: 0
- maximum: 64
- - description: Rx FIFO 0 0-64 elements / 0-1152 words
- minimum: 0
- maximum: 64
- - description: Rx FIFO 1 0-64 elements / 0-1152 words
- minimum: 0
- maximum: 64
- - description: Rx Buffers 0-64 elements / 0-1152 words
- minimum: 0
- maximum: 64
- - description: Tx Event FIFO 0-32 elements / 0-64 words
- minimum: 0
- maximum: 32
- - description: Tx Buffers 0-32 elements / 0-576 words
- minimum: 0
- maximum: 32
- maxItems: 1
+ - description: The 'offset' is an address offset of the Message RAM where
+ the following elements start from. This is usually set to 0x0 if
+ you're using a private Message RAM.
+ default: 0
+ - description: 11-bit Filter 0-128 elements / 0-128 words
+ minimum: 0
+ maximum: 128
+ - description: 29-bit Filter 0-64 elements / 0-128 words
+ minimum: 0
+ maximum: 64
+ - description: Rx FIFO 0 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Rx FIFO 1 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Rx Buffers 0-64 elements / 0-1152 words
+ minimum: 0
+ maximum: 64
+ - description: Tx Event FIFO 0-32 elements / 0-64 words
+ minimum: 0
+ maximum: 32
+ - description: Tx Buffers 0-32 elements / 0-576 words
+ minimum: 0
+ maximum: 32
power-domains:
description:
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 47b5f728701d..34c5463abcec 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -17,9 +17,8 @@ properties:
description:
Specifies the MAC address that was assigned to the network device.
$ref: /schemas/types.yaml#/definitions/uint8-array
- items:
- - minItems: 6
- maxItems: 6
+ minItems: 6
+ maxItems: 6
mac-address:
description:
@@ -28,9 +27,8 @@ properties:
to the device by the boot program is different from the
local-mac-address property.
$ref: /schemas/types.yaml#/definitions/uint8-array
- items:
- - minItems: 6
- maxItems: 6
+ minItems: 6
+ maxItems: 6
max-frame-size:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -164,33 +162,30 @@ properties:
type: array
then:
deprecated: true
- minItems: 1
- maxItems: 1
items:
- items:
- - minimum: 0
- maximum: 31
- description:
- Emulated PHY ID, choose any but unique to the all
- specified fixed-links
-
- - enum: [0, 1]
- description:
- Duplex configuration. 0 for half duplex or 1 for
- full duplex
-
- - enum: [10, 100, 1000, 2500, 10000]
- description:
- Link speed in Mbits/sec.
-
- - enum: [0, 1]
- description:
- Pause configuration. 0 for no pause, 1 for pause
-
- - enum: [0, 1]
- description:
- Asymmetric pause configuration. 0 for no asymmetric
- pause, 1 for asymmetric pause
+ - minimum: 0
+ maximum: 31
+ description:
+ Emulated PHY ID, choose any but unique to the all
+ specified fixed-links
+
+ - enum: [0, 1]
+ description:
+ Duplex configuration. 0 for half duplex or 1 for
+ full duplex
+
+ - enum: [10, 100, 1000, 2500, 10000]
+ description:
+ Link speed in Mbits/sec.
+
+ - enum: [0, 1]
+ description:
+ Pause configuration. 0 for no pause, 1 for pause
+
+ - enum: [0, 1]
+ description:
+ Asymmetric pause configuration. 0 for no asymmetric
+ pause, 1 for asymmetric pause
- if:
--
2.32.0
Powered by blists - more mailing lists