| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <000401d80d47$6a01c690$3e0553b0$@samsung.com>
Date: Wed, 19 Jan 2022 20:45:29 +0530
From: "Alim Akhtar" <alim.akhtar@...sung.com>
To: "'Henrik Grimler'" <henrik@...mler.se>,
<semen.protsenko@...aro.org>, <virag.david003@...il.com>,
<martin.juecker@...il.com>, <cw00.choi@...sung.com>,
<m.szyprowski@...sung.com>, <krzysztof.kozlowski@...onical.com>,
<robh+dt@...nel.org>, <devicetree@...r.kernel.org>,
<linux-samsung-soc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<~postmarketos/upstreaming@...ts.sr.ht>
Subject: RE: [PATCH v4 3/3] ARM: dts: Add support for Samsung Chagall WiFi
Hi Henrik,
>-----Original Message-----
>From: Henrik Grimler [mailto:henrik@...mler.se]
>Sent: Wednesday, January 19, 2022 12:28 AM
>To: semen.protsenko@...aro.org; virag.david003@...il.com;
>martin.juecker@...il.com; cw00.choi@...sung.com;
>m.szyprowski@...sung.com; alim.akhtar@...sung.com;
>krzysztof.kozlowski@...onical.com; robh+dt@...nel.org;
>devicetree@...r.kernel.org; linux-samsung-soc@...r.kernel.org; linux-arm-
>kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
>~postmarketos/upstreaming@...ts.sr.ht
>Cc: Henrik Grimler <henrik@...mler.se>
>Subject: [PATCH v4 3/3] ARM: dts: Add support for Samsung Chagall WiFi
>
>Chagall WiFi, with product name Samsung Galaxy Tab S 10.5", is based on
>Exynos 5420. This device is one of several tablet models released in 2014
>based on Exynos 5420.
>
>The device tree added here contains support for:
>
>- UART
>- eMMC
>- SD card
>- USB
>
>CCI has been disabled in the hardware, enabling it would require (de-
>)soldering a resistor on the board. Trying to boot with it enabled in
kernel
>makes the device hang when CCI is probed.
>Exynos5420-arndale-octa also has had CCI disabled due to issues, see commit
>25217fef3551 ("ARM: dts: disable CCI on exynos5420 based arndale-octa").
>
>Signed-off-by: Henrik Grimler <henrik@...mler.se>
>---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5420-chagall-wifi.dts | 75 ++
> .../dts/exynos5420-galaxy-tab-common.dtsi | 692 ++++++++++++++++++
> 3 files changed, 768 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5420-chagall-wifi.dts
> create mode 100644 arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
>
>diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index
>0de64f237cd8..088fcedb3212 100644
>--- a/arch/arm/boot/dts/Makefile
>+++ b/arch/arm/boot/dts/Makefile
>@@ -220,6 +220,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
> exynos5420-arndale-octa.dtb \
> exynos5420-peach-pit.dtb \
> exynos5420-smdk5420.dtb \
>+ exynos5420-chagall-wifi.dtb \
> exynos5422-odroidhc1.dtb \
> exynos5422-odroidxu3.dtb \
> exynos5422-odroidxu3-lite.dtb \
>diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
>b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
>new file mode 100644
>index 000000000000..1319344a2c74
>--- /dev/null
>+++ b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
>@@ -0,0 +1,75 @@
>+// SPDX-License-Identifier: GPL-2.0
>+/*
>+ * Samsung's Exynos5420 Chagall WiFi board device tree source
>+ *
>+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
>+ * http://www.samsung.com
>+ * Copyright (c) 2022 Henrik Grimler
>+ */
>+
>+/dts-v1/;
>+#include "exynos5420-galaxy-tab-common.dtsi"
>+
>+/ {
>+ model = "Samsung Chagall WiFi based on Exynos5420";
>+ compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
>+ "samsung,exynos5";
>+};
>+
>+&ldo15_reg {
>+ /* Unused */
>+ regulator-name = "VDD_LDO15";
>+ regulator-min-microvolt = <3300000>;
>+ regulator-max-microvolt = <3300000>;
>+};
>+
>+&ldo17_reg {
>+ regulator-name = "VDD_IRLED_3V3";
>+ regulator-min-microvolt = <3300000>;
>+ regulator-max-microvolt = <3350000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+};
>+
>+&ldo28_reg {
>+ /* Unused */
>+ regulator-name = "VDD_LDO28";
>+ regulator-min-microvolt = <3300000>;
>+ regulator-max-microvolt = <3300000>;
>+};
>+
>+&ldo29_reg {
>+ regulator-name = "VDD_TCON_1V8";
>+ regulator-min-microvolt = <1900000>;
>+ regulator-max-microvolt = <1900000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+};
>+
>+&ldo31_reg {
>+ regulator-name = "VDD_GRIP_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+};
>+
>+&ldo32_reg {
>+ regulator-name = "VDD_TSP_1V8";
>+ regulator-min-microvolt = <1900000>;
>+ regulator-max-microvolt = <1900000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+};
>diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
>b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
>new file mode 100644
>index 000000000000..e4ed0fd153f4
>--- /dev/null
>+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
>@@ -0,0 +1,692 @@
>+// SPDX-License-Identifier: GPL-2.0
>+/*
>+ * Base DT for Samsung's family of tablets based on Exynos5420.
>+ *
>+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
>+ * http://www.samsung.com
>+ * Copyright (c) 2022 Henrik Grimler
>+ */
>+
>+/dts-v1/;
>+#include "exynos5420.dtsi"
>+#include "exynos5420-cpus.dtsi"
>+#include <dt-bindings/input/input.h>
>+#include <dt-bindings/gpio/gpio.h>
>+#include <dt-bindings/clock/samsung,s2mps11.h>
>+
>+/ {
>+ chassis-type = "tablet";
>+
>+ /*
>+ * To successfully boot the mainline kernel with the stock
>+ * bootloader (SBOOT), the tlb needs to be flushed after the
>+ * page table pointer has been updated in
>__common_mmu_cache_on.
>+ * The same hack is also needed to boot exynos4412-i9300 with
>+ * stock bootloader, and probably other Samsung devices of
>+ * similar age. See
>+ * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-
>arve@...roid.com
>+ * for more details.
>+ */
>+
>+ chosen {
>+ stdout-path = "serial2:115200n8";
>+ };
>+
>+ memory@...00000 {
>+ device_type = "memory";
>+ reg = <0x20000000 0xc0000000>;
>+ };
>+
>+ firmware@...3000 {
>+ compatible = "samsung,secure-firmware";
>+ reg = <0x02073000 0x1000>;
>+ };
>+
>+ fixed-rate-clocks {
>+ oscclk {
>+ compatible = "samsung,exynos5420-oscclk";
>+ clock-frequency = <24000000>;
>+ };
>+ };
>+
>+ gpio-keys {
>+ compatible = "gpio-keys";
>+ pinctrl-names = "default";
>+
>+ key-power {
>+ debounce-interval = <10>;
>+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
>+ label = "Power";
>+ linux,code = <KEY_POWER>;
>+ wakeup-source;
>+ };
>+
>+ key-home {
>+ debounce-interval = <10>;
>+ gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
>+ label = "Home";
>+ linux,code = <KEY_HOME>;
>+ wakeup-source;
>+ };
>+
>+ key-volume-up {
>+ debounce-interval = <10>;
>+ gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
>+ label = "Volume Up";
>+ linux,code = <KEY_VOLUMEUP>;
>+ };
>+
>+ key-volume-down {
>+ debounce-interval = <10>;
>+ gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
>+ label = "Volume Down";
>+ linux,code = <KEY_VOLUMEDOWN>;
>+ };
>+ };
>+};
>+
>+&cci {
>+ /* CCI is disabled in hardware */
>+ status = "disabled";
>+};
>+
>+&cpu0 {
>+ cpu-supply = <&buck2_reg>;
>+};
>+
>+&cpu4 {
>+ cpu-supply = <&buck6_reg>;
>+};
>+
>+&gpu {
>+ status = "okay";
>+ mali-supply = <&buck4_reg>;
>+};
>+
>+&hsi2c_7 {
>+ status = "okay";
>+
>+ pmic@66 {
>+ compatible = "samsung,s2mps11-pmic";
>+ reg = <0x66>;
>+
>+ interrupt-parent = <&gpx3>;
>+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&s2mps11_irq>;
>+
>+ s2mps11_osc: clocks {
>+ compatible = "samsung,s2mps11-clk";
>+ #clock-cells = <1>;
>+ clock-output-names = "s2mps11_ap", "s2mps11_cp",
>+ "s2mps11_bt";
>+ };
>+
>+ regulators {
>+ buck1_reg: BUCK1 {
>+ regulator-name = "VDD_MIF_1V1";
>+ regulator-min-microvolt = <700000>;
>+ regulator-max-microvolt = <1300000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ buck2_reg: BUCK2 {
>+ regulator-name = "VDD_ARM_1V0";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <1500000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ buck3_reg: BUCK3 {
>+ regulator-name = "VDD_INT_1V0";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <1400000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ buck4_reg: BUCK4 {
>+ regulator-name = "VDD_G3D_1V0";
>+ regulator-min-microvolt = <700000>;
>+ regulator-max-microvolt = <1400000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ buck5_reg: BUCK5 {
>+ regulator-name = "VDD_MEM_1V2";
>+ regulator-min-microvolt = <1200000>;
>+ regulator-max-microvolt = <1200000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+
>+ };
>+
>+ buck6_reg: BUCK6 {
>+ regulator-name = "VDD_KFC_1V0";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <1500000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ buck7_reg: BUCK7 {
>+ regulator-name = "VIN_LLDO_1V4";
>+ regulator-min-microvolt = <1200000>;
>+ regulator-max-microvolt = <1500000>;
>+ regulator-always-on;
>+ };
>+
>+ buck8_reg: BUCK8 {
>+ regulator-name = "VIN_MLDO_2V0";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <2100000>;
>+ regulator-always-on;
>+ };
>+
>+ buck9_reg: BUCK9 {
>+ regulator-name = "VIN_HLDO_3V5";
>+ regulator-min-microvolt = <3000000>;
>+ regulator-max-microvolt = <3500000>;
>+ regulator-always-on;
>+ };
>+
>+ buck10_reg: BUCK10 {
>+ regulator-name = "VDD_CAM_ISP_1V0";
>+ regulator-min-microvolt = <750000>;
>+ regulator-max-microvolt = <3550000>;
>+ };
>+
>+ ldo1_reg: LDO1 {
>+ regulator-name = "VDD_ALIVE_1.0V";
>+ regulator-min-microvolt = <1000000>;
>+ regulator-max-microvolt = <1000000>;
>+ regulator-always-on;
>+ };
>+
>+ ldo2_reg: LDO2 {
>+ regulator-name = "VDD_APIO_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo3_reg: LDO3 {
>+ regulator-name = "VDD_APIO_MMC01_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo4_reg: LDO4 {
>+ regulator-name = "VDD_ADC_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo5_reg: LDO5 {
>+ /* Unused */
>+ regulator-name = "VDD_LDO5";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ };
>+
>+ ldo6_reg: LDO6 {
>+ regulator-name = "VDD_MIPI_1V0";
>+ regulator-min-microvolt = <1000000>;
>+ regulator-max-microvolt = <1000000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo7_reg: LDO7 {
>+ regulator-name =
>"VDD_MIPI_PLL_ABB1_18V";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo8_reg: LDO8 {
>+ /* Unused */
>+ regulator-name = "VDD_LDO8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ };
>+
>+ ldo9_reg: LDO9 {
>+ regulator-name = "VDD_UOTG_3V0";
>+ regulator-min-microvolt = <3000000>;
>+ regulator-max-microvolt = <3000000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo10_reg: LDO10 {
>+ regulator-name = "VDDQ_PRE_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo11_reg: LDO11 {
>+ regulator-name = "VDD_HSIC_1V0";
>+ regulator-min-microvolt = <1000000>;
>+ regulator-max-microvolt = <1000000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo12_reg: LDO12 {
>+ regulator-name = "VDD_HSIC_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo13_reg: LDO13 {
>+ regulator-name = "VDD_APIO_MMC2_2V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <2800000>;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo14_reg: LDO14 {
>+ regulator-name = "VDD_MOTOR_3V0";
>+ regulator-min-microvolt = <3000000>;
>+ regulator-max-microvolt = <3000000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo15_reg: LDO15 {
>+ regulator-name = "VDD_LDO15";
>+ /*
>+ * LDO15 varies between devices and is
>+ * specified in the device dts
>+ */
>+ };
>+
>+ ldo16_reg: LDO16 {
>+ regulator-name = "VDD_AP_2V8";
>+ regulator-min-microvolt = <2800000>;
>+ regulator-max-microvolt = <2800000>;
>+ regulator-always-on;
>+ regulator-boot-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo17_reg: LDO17 {
>+ regulator-name = "VDD_LDO17";
>+ /*
>+ * LDO17 varies between devices and is
>+ * specified in the device dts
>+ */
>+ };
>+
>+ ldo18_reg: LDO18 {
>+ /* Unused */
>+ regulator-name = "VDD_LDO18";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+ };
>+
>+
Nit: remove extra line here
Not sure if you need to re-spin the patch or may be Krzysztof will fix this
will applying
Rest looks fine.
Reviewed-by: Alim Akhtar <alim.akhtar@...sung.com>
>+ ldo19_reg: LDO19 {
>+ regulator-name = "VDD_VTF_2V8";
>+ regulator-min-microvolt = <2800000>;
>+ regulator-max-microvolt = <2800000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo20_reg: LDO20 {
>+ regulator-name = "VDD_CAM1_CAM_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo21_reg: LDO21 {
>+ regulator-name = "VDD_CAM_IO_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo22_reg: LDO22 {
>+ regulator-name =
>"VDD_CAM0_S_CORE_1V1";
>+ regulator-min-microvolt = <1050000>;
>+ regulator-max-microvolt = <1200000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo23_reg: LDO23 {
>+ regulator-name = "VDD_MIFS_1V1";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <1100000>;
>+ regulator-always-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo24_reg: LDO24 {
>+ regulator-name = "VDD_TSP_3V3";
>+ regulator-min-microvolt = <3300000>;
>+ regulator-max-microvolt = <3300000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo25_reg: LDO25 {
>+ /* Unused */
>+ regulator-name = "VDD_LDO25";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <3950000>;
>+ };
>+
>+ ldo26_reg: LDO26 {
>+ regulator-name = "VDD_CAM0_AF_2V8";
>+ regulator-min-microvolt = <2800000>;
>+ regulator-max-microvolt = <2800000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo27_reg: LDO27 {
>+ regulator-name = "VDD_G3DS_1V0";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <1000000>;
>+ regulator-always-on;
>+
>+ regulator-state-mem {
>+ regulator-on-in-suspend;
>+ };
>+ };
>+
>+ ldo28_reg: LDO28 {
>+ regulator-name = "VDD_LDO28";
>+ /*
>+ * LDO28 varies between devices and is
>+ * specified in the device dts
>+ */
>+ };
>+
>+ ldo29_reg: LDO29 {
>+ regulator-name = "VDD_LDO29";
>+ /*
>+ * LDO29 varies between devices and is
>+ * specified in the device dts
>+ */
>+ };
>+
>+ ldo30_reg: LDO30 {
>+ regulator-name = "VDD_TOUCH_1V8";
>+ regulator-min-microvolt = <1900000>;
>+ regulator-max-microvolt = <1900000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo31_reg: LDO31 {
>+ regulator-name = "VDD_LDO31";
>+ /*
>+ * LDO31 varies between devices and is
>+ * specified in the device dts
>+ */
>+ };
>+
>+ ldo32_reg: LDO32 {
>+ regulator-name = "VDD_LDO32";
>+ /*
>+ * LDO32 varies between devices and is
>+ * specified in the device dts
>+ */
>+ };
>+
>+ ldo33_reg: LDO33 {
>+ regulator-name = "VDD_MHL_1V8";
>+ regulator-min-microvolt = <1800000>;
>+ regulator-max-microvolt = <1800000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo34_reg: LDO34 {
>+ regulator-name = "VDD_MHL_3V3";
>+ regulator-min-microvolt = <3300000>;
>+ regulator-max-microvolt = <3300000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo35_reg: LDO35 {
>+ regulator-name = "VDD_SIL_1V2";
>+ regulator-min-microvolt = <1200000>;
>+ regulator-max-microvolt = <1200000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+
>+ ldo36_reg: LDO36 {
>+ /* Unused */
>+ regulator-name = "VDD_LDO36";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <3950000>;
>+ };
>+
>+ ldo37_reg: LDO37 {
>+ /* Unused */
>+ regulator-name = "VDD_LDO37";
>+ regulator-min-microvolt = <800000>;
>+ regulator-max-microvolt = <3950000>;
>+ };
>+
>+ ldo38_reg: LDO38 {
>+ regulator-name = "VDD_KEY_LED_3V3";
>+ regulator-min-microvolt = <2500000>;
>+ regulator-max-microvolt = <3300000>;
>+
>+ regulator-state-mem {
>+ regulator-off-in-suspend;
>+ };
>+ };
>+ };
>+ };
>+};
>+
>+&mixer {
>+ status = "okay";
>+};
>+
>+/* Internal storage */
>+&mmc_0 {
>+ status = "okay";
>+ bus-width = <8>;
>+ cap-mmc-highspeed;
>+ card-detect-delay = <200>;
>+ mmc-hs200-1_8v;
>+ non-removable;
>+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
>+ pinctrl-names = "default";
>+ samsung,dw-mshc-ciu-div = <3>;
>+ samsung,dw-mshc-ddr-timing = <0 2>;
>+ samsung,dw-mshc-sdr-timing = <0 4>;
>+ vqmmc-supply = <&ldo3_reg>;
>+};
>+
>+/* External sdcard */
>+&mmc_2 {
>+ status = "okay";
>+ bus-width = <4>;
>+ cap-sd-highspeed;
>+ card-detect-delay = <200>;
>+ cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
>+ pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
>+ pinctrl-names = "default";
>+ samsung,dw-mshc-ciu-div = <3>;
>+ samsung,dw-mshc-ddr-timing = <0 2>;
>+ samsung,dw-mshc-sdr-timing = <0 4>;
>+ sd-uhs-sdr50;
>+ vmmc-supply = <&ldo19_reg>;
>+ vqmmc-supply = <&ldo13_reg>;
>+};
>+
>+&pinctrl_0 {
>+ mmc2_cd: mmc2-cd-pins {
>+ samsung,pins = "gpx2-4";
>+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>+ };
>+
>+ s2mps11_irq: s2mps11-irq-pins {
>+ samsung,pins = "gpx3-0";
>+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
>+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
>+ };
>+};
>+
>+&rtc {
>+ status = "okay";
>+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
>+ clock-names = "rtc", "rtc_src";
>+};
>+
>+&tmu_cpu0 {
>+ vtmu-supply = <&ldo10_reg>;
>+};
>+
>+&tmu_cpu1 {
>+ vtmu-supply = <&ldo10_reg>;
>+};
>+
>+&tmu_cpu2 {
>+ vtmu-supply = <&ldo10_reg>;
>+};
>+
>+&tmu_cpu3 {
>+ vtmu-supply = <&ldo10_reg>;
>+};
>+
>+&tmu_gpu {
>+ vtmu-supply = <&ldo10_reg>;
>+};
>+
>+&usbdrd_dwc3_0 {
>+ dr_mode = "peripheral";
>+};
>+
>+&usbdrd_dwc3_1 {
>+ dr_mode = "peripheral";
>+};
>+
>+&usbdrd3_0 {
>+ vdd33-supply = <&ldo9_reg>;
>+ vdd10-supply = <&ldo11_reg>;
>+};
>+
>+&usbdrd3_1 {
>+ vdd33-supply = <&ldo9_reg>;
>+ vdd10-supply = <&ldo11_reg>;
>+};
>--
>2.34.1
Powered by blists - more mailing lists