| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f55ff70c-1578-afa7-999e-ba504aa325eb@redhat.com>
Date: Wed, 19 Jan 2022 18:48:17 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>,
Lucas tanure <tanureal@...nsource.cirrus.com>
Cc: Stefan Binding <sbinding@...nsource.cirrus.com>,
Mark Brown <broonie@...nel.org>, Len Brown <lenb@...nel.org>,
Mark Gross <markgross@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
"moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM..."
<alsa-devel@...a-project.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-spi <linux-spi@...r.kernel.org>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Platform Driver <platform-driver-x86@...r.kernel.org>,
patches@...nsource.cirrus.com
Subject: Re: [PATCH v3 05/10] platform/x86: i2c-multi-instantiate: Move it to
drivers/acpi folder
Hi,
On 1/19/22 18:44, Rafael J. Wysocki wrote:
> On Wed, Jan 19, 2022 at 6:33 PM Lucas tanure
> <tanureal@...nsource.cirrus.com> wrote:
>>
>> On 1/19/22 16:53, Rafael J. Wysocki wrote:
>>> On Tue, Jan 18, 2022 at 3:53 PM Stefan Binding
>>> <sbinding@...nsource.cirrus.com> wrote:
>>>>
>>>> From: Lucas Tanure <tanureal@...nsource.cirrus.com>
>>>>
>>>> Moving I2C multi instantiate driver to drivers/acpi folder for
>>>> upcoming conversion into a generic bus multi instantiate
>>>> driver for SPI and I2C
>>>>
>>>> Signed-off-by: Lucas Tanure <tanureal@...nsource.cirrus.com>
>>>> Signed-off-by: Stefan Binding <sbinding@...nsource.cirrus.com>
>>>
>>> Why are you moving it away from platform/x86?
>>>
>>> Adding SPI to the mix doesn't seem to be a sufficient reason.
>>>
>>> If this were going to be needed on non-x86, that would be a good
>>> reason for moving it, but is that actually the case? If so, why isn't
>>> that mentioned in the changelog above?
>>>
>>
>> It was a request made by Andy Shevchenko:
>> https://lkml.org/lkml/2021/12/3/347
>
> But he hasn't given any reasons why that'd be better.
>
>> There is no plan to use our CS35L41 HDA with non-x86 platforms and we
>> can't comment about i2c-multi-instantiate use.
>> For us it can stay in x86 folder until an actual request.
>
> I'd prefer that if Hans agrees.
Ack, keeping this in drivers/platform/x86 is fine with me.
I'll try to make some time to review this new version next week.
Looking at the subjects of the patches I see that this now
refactors the SPI code to re-use the existing SPI ACPI resource
parsing there, thank you for doing that!
Regards,
Hans
>
>>>> ---
>>>> MAINTAINERS | 2 +-
>>>> drivers/acpi/Kconfig | 11 +++++++++++
>>>> drivers/acpi/Makefile | 1 +
>>>> .../{platform/x86 => acpi}/i2c-multi-instantiate.c | 0
>>>> drivers/acpi/scan.c | 2 +-
>>>> drivers/platform/x86/Kconfig | 11 -----------
>>>> drivers/platform/x86/Makefile | 1 -
>>>> 7 files changed, 14 insertions(+), 14 deletions(-)
>>>> rename drivers/{platform/x86 => acpi}/i2c-multi-instantiate.c (100%)
>>>>
>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>> index 4e828542b089..546f9e149d28 100644
>>>> --- a/MAINTAINERS
>>>> +++ b/MAINTAINERS
>>>> @@ -392,7 +392,7 @@ ACPI I2C MULTI INSTANTIATE DRIVER
>>>> M: Hans de Goede <hdegoede@...hat.com>
>>>> L: platform-driver-x86@...r.kernel.org
>>>> S: Maintained
>>>> -F: drivers/platform/x86/i2c-multi-instantiate.c
>>>> +F: drivers/acpi/i2c-multi-instantiate.c
>>>>
>>>> ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
>>>> M: Sudeep Holla <sudeep.holla@....com>
>>>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>>>> index ba45541b1f1f..2fd78366af6f 100644
>>>> --- a/drivers/acpi/Kconfig
>>>> +++ b/drivers/acpi/Kconfig
>>>> @@ -295,6 +295,17 @@ config ACPI_PROCESSOR
>>>> To compile this driver as a module, choose M here:
>>>> the module will be called processor.
>>>>
>>>> +config ACPI_I2C_MULTI_INST
>>>> + tristate "I2C multi instantiate pseudo device driver"
>>>> + depends on I2C
>>>> + help
>>>> + Some ACPI-based systems list multiple i2c-devices in a single ACPI
>>>> + firmware-node. This driver will instantiate separate i2c-clients
>>>> + for each device in the firmware-node.
>>>> +
>>>> + To compile this driver as a module, choose M here: the module
>>>> + will be called i2c-multi-instantiate.
>>>> +
>>>> config ACPI_IPMI
>>>> tristate "IPMI"
>>>> depends on IPMI_HANDLER
>>>> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
>>>> index bb757148e7ba..d4db7fb0baf0 100644
>>>> --- a/drivers/acpi/Makefile
>>>> +++ b/drivers/acpi/Makefile
>>>> @@ -104,6 +104,7 @@ obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
>>>> obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
>>>> obj-$(CONFIG_ACPI_PPTT) += pptt.o
>>>> obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o
>>>> +obj-$(CONFIG_ACPI_I2C_MULTI_INST) += i2c-multi-instantiate.o
>>>>
>>>> # processor has its own "processor." module_param namespace
>>>> processor-y := processor_driver.o
>>>> diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/acpi/i2c-multi-instantiate.c
>>>> similarity index 100%
>>>> rename from drivers/platform/x86/i2c-multi-instantiate.c
>>>> rename to drivers/acpi/i2c-multi-instantiate.c
>>>> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
>>>> index 1331756d4cfc..3e85a02f6ba2 100644
>>>> --- a/drivers/acpi/scan.c
>>>> +++ b/drivers/acpi/scan.c
>>>> @@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
>>>> * must be instantiated for each, each with its own i2c_device_id.
>>>> * Normally we only instantiate an i2c-client for the first resource,
>>>> * using the ACPI HID as id. These special cases are handled by the
>>>> - * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
>>>> + * drivers/acpi/i2c-multi-instantiate.c driver, which knows
>>>> * which i2c_device_id to use for each resource.
>>>> */
>>>> {"BSG1160", },
>>>> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
>>>> index 24deeeb29af2..37c1c150508d 100644
>>>> --- a/drivers/platform/x86/Kconfig
>>>> +++ b/drivers/platform/x86/Kconfig
>>>> @@ -990,17 +990,6 @@ config TOPSTAR_LAPTOP
>>>>
>>>> If you have a Topstar laptop, say Y or M here.
>>>>
>>>> -config I2C_MULTI_INSTANTIATE
>>>> - tristate "I2C multi instantiate pseudo device driver"
>>>> - depends on I2C && ACPI
>>>> - help
>>>> - Some ACPI-based systems list multiple i2c-devices in a single ACPI
>>>> - firmware-node. This driver will instantiate separate i2c-clients
>>>> - for each device in the firmware-node.
>>>> -
>>>> - To compile this driver as a module, choose M here: the module
>>>> - will be called i2c-multi-instantiate.
>>>> -
>>>> config MLX_PLATFORM
>>>> tristate "Mellanox Technologies platform support"
>>>> depends on I2C && REGMAP
>>>> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
>>>> index c12a9b044fd8..6c7870190564 100644
>>>> --- a/drivers/platform/x86/Makefile
>>>> +++ b/drivers/platform/x86/Makefile
>>>> @@ -110,7 +110,6 @@ obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
>>>>
>>>> # Platform drivers
>>>> obj-$(CONFIG_FW_ATTR_CLASS) += firmware_attributes_class.o
>>>> -obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
>>>> obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
>>>> obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
>>>> obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
>>>> --
>>>> 2.25.1
>>>>
>>
>
Powered by blists - more mailing lists