lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220120070226.1492-7-biao.huang@mediatek.com>
Date:   Thu, 20 Jan 2022 15:02:23 +0800
From:   Biao Huang <biao.huang@...iatek.com>
To:     David Miller <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Fabien Parent <fparent@...libre.com>
CC:     Jakub Kicinski <kuba@...nel.org>, Felix Fietkau <nbd@....name>,
        "John Crispin" <john@...ozen.org>,
        Sean Wang <sean.wang@...iatek.com>,
        Mark Lee <Mark-MC.Lee@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        Biao Huang <biao.huang@...iatek.com>,
        Yinghua Pan <ot_yinghua.pan@...iatek.com>,
        <srv_heupstream@...iatek.com>,
        Macpaul Lin <macpaul.lin@...iatek.com>
Subject: [PATCH net-next v1 6/9] net: ethernet: mtk-star-emac: add timing adjustment support

Add simple clock inversion for timing adjustment in driver.
Add property "mediatek,txc-inverse" or "mediatek,rxc-inverse" to
device node when necessary.

Signed-off-by: Biao Huang <biao.huang@...iatek.com>
Signed-off-by: Yinghua Pan <ot_yinghua.pan@...iatek.com>
---
 drivers/net/ethernet/mediatek/mtk_star_emac.c | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
index ab2fe72fdd6a..e37fa2cb5433 100644
--- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
+++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
@@ -131,6 +131,11 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
 #define MTK_STAR_REG_INT_MASK			0x0054
 #define MTK_STAR_BIT_INT_MASK_FNRC		BIT(6)
 
+/* Delay-Macro Register */
+#define MTK_STAR_REG_TEST0			0x0058
+#define MTK_STAR_BIT_INV_RX_CLK			BIT(30)
+#define MTK_STAR_BIT_INV_TX_CLK			BIT(31)
+
 /* Misc. Config Register */
 #define MTK_STAR_REG_TEST1			0x005c
 #define MTK_STAR_BIT_TEST1_RST_HASH_MBIST	BIT(31)
@@ -268,6 +273,8 @@ struct mtk_star_priv {
 	int duplex;
 	int pause;
 	bool rmii_rxc;
+	bool rx_inv;
+	bool tx_inv;
 
 	const struct mtk_star_compat *compat_data;
 
@@ -1450,6 +1457,25 @@ static void mtk_star_clk_disable_unprepare(void *data)
 	clk_bulk_disable_unprepare(MTK_STAR_NCLKS, priv->clks);
 }
 
+static int mtk_star_set_timing(struct mtk_star_priv *priv)
+{
+	struct device *dev = mtk_star_get_dev(priv);
+	unsigned int delay_val = 0;
+
+	switch (priv->phy_intf) {
+	case PHY_INTERFACE_MODE_RMII:
+		delay_val |= FIELD_PREP(MTK_STAR_BIT_INV_RX_CLK, priv->rx_inv);
+		delay_val |= FIELD_PREP(MTK_STAR_BIT_INV_TX_CLK, priv->tx_inv);
+		break;
+	default:
+		dev_err(dev, "This interface not supported\n");
+		return -EINVAL;
+	}
+
+	regmap_write(priv->regs, MTK_STAR_REG_TEST0, delay_val);
+
+	return 0;
+}
 static int mtk_star_probe(struct platform_device *pdev)
 {
 	struct device_node *of_node;
@@ -1532,6 +1558,8 @@ static int mtk_star_probe(struct platform_device *pdev)
 	}
 
 	priv->rmii_rxc = of_property_read_bool(of_node, "mediatek,rmii-rxc");
+	priv->rx_inv = of_property_read_bool(of_node, "mediatek,rxc-inverse");
+	priv->tx_inv = of_property_read_bool(of_node, "mediatek,txc-inverse");
 
 	if (priv->compat_data->set_interface_mode) {
 		ret = priv->compat_data->set_interface_mode(ndev);
@@ -1541,6 +1569,12 @@ static int mtk_star_probe(struct platform_device *pdev)
 		}
 	}
 
+	ret = mtk_star_set_timing(priv);
+	if (ret) {
+		dev_err(dev, "Failed to set timing, err = %d\n", ret);
+		return -EINVAL;
+	}
+
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret) {
 		dev_err(dev, "unsupported DMA mask\n");
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ