linux-kernel - [PATCH v4 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220120025759.8630-1-ilkka@os.amperecomputing.com>
Date:   Wed, 19 Jan 2022 18:57:57 -0800
From:   Ilkka Koskinen <ilkka@...amperecomputing.com>
To:     lorenzo.pieralisi@....com, guohanjun@...wei.com,
        sudeep.holla@....com, rafael@...nel.org, linux@...linux.org.uk
Cc:     lenb@...nel.org, robert.moore@...el.com,
        linux-acpi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, patches@...erecomputing.com,
        scott@...amperecomputing.com, darren@...amperecomputing.com,
        james.morse@....com
Subject: [PATCH v4 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device

Arm Generic Diagnostic Dump and Reset device enables a maintainer to
request OS to perform a diagnostic dump and reset a system via SDEI
event or an interrupt. This patchset adds support for the SDEI path.

I do have a patch to enable the interrupt path as well but I'm holding
it back since AGDI table is missing interrupt configuration fields
(trigger type etc.).

The recently published specification is available at
https://developer.arm.com/documentation/den0093/latest

The patchset was tested on Ampere Altra/Mt. Jade.

The patchset applies on top of
  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm bleeding-edge (fc720b592cc6)


>From v1:
     * Moved pdata to the stack and dropped unnecessary kzalloc() in agdi_init()
     * Changed the ACPICA patch upstreaming order comment in the paragraph above

>From v2:
     * The first patch was split. The most of it was merged to ACPICA project
       at first and later ported to linux-acpi
       (fd919e37cb15914c6fe13e13d530a4f732407c6d). The rest are in the first
       patch.

>From v3:
     Fixed:
	* Moved header files in alphabetical order and removed unnecessary ones

     Not addressed:
 	* agdi_init() is still called from device_initcall() as it has to be
	  done after sdei_init()
	  (http://lists.infradead.org/pipermail/linux-arm-kernel/2022-January/709969.html)

	  Can be moved to acpi_init(), after Shuai Xue's patch get's approved
	  (http://lists.infradead.org/pipermail/linux-arm-kernel/2022-January/710268.html)


Ilkka Koskinen (2):
  ACPI: tables: Add AGDI to the list of known table signatures
  ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset
    device

 drivers/acpi/arm64/Kconfig  |   8 +++
 drivers/acpi/arm64/Makefile |   1 +
 drivers/acpi/arm64/agdi.c   | 122 ++++++++++++++++++++++++++++++++++++
 drivers/acpi/tables.c       |   2 +-
 4 files changed, 132 insertions(+), 1 deletion(-)
 create mode 100644 drivers/acpi/arm64/agdi.c

-- 
2.17.1