| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <17b0b0d3dd313cd5707ff43313f9c57bae6d5b73.camel@calian.com>
Date: Thu, 20 Jan 2022 16:52:45 +0000
From: Robert Hancock <robert.hancock@...ian.com>
To: "sean.anderson@...o.com" <sean.anderson@...o.com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
CC: "bjagadee@...eaurora.org" <bjagadee@...eaurora.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Thinh.Nguyen@...opsys.com" <Thinh.Nguyen@...opsys.com>,
"balbi@...nel.org" <balbi@...nel.org>,
"baruch@...s.co.il" <baruch@...s.co.il>
Subject: Re: [PATCH v2 2/7] usb: dwc3: Get clocks individually
On Tue, 2022-01-18 at 19:24 -0500, Sean Anderson wrote:
> Instead of grabbing all clocks in bulk, grab them individually. This will
> allow us to get the frequency or otherwise deal with discrete clocks. This
> may break some platforms if they use a clock which doesn't use one of the
> documented names.
>
> Signed-off-by: Sean Anderson <sean.anderson@...o.com>
> ---
>
> Changes in v2:
> - Document clock members
>
> drivers/usb/dwc3/core.c | 62 +++++++++++++++++++++++++++++++++--------
> drivers/usb/dwc3/core.h | 10 ++++---
> 2 files changed, 56 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index f4c09951b517..699ab9abdc47 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -745,6 +745,38 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
> return 0;
> }
>
> +static int dwc3_clk_enable(struct dwc3 *dwc)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(dwc->bus_clk);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(dwc->ref_clk);
> + if (ret)
> + goto disable_bus_clk;
> +
> + ret = clk_prepare_enable(dwc->susp_clk);
> + if (ret)
> + goto disable_ref_clk;
> +
> + return 0;
> +
> +disable_ref_clk:
> + clk_disable_unprepare(dwc->ref_clk);
> +disable_bus_clk:
> + clk_disable_unprepare(dwc->bus_clk);
> + return ret;
> +}
> +
> +static void dwc3_clk_disable(struct dwc3 *dwc)
> +{
> + clk_disable_unprepare(dwc->susp_clk);
> + clk_disable_unprepare(dwc->ref_clk);
> + clk_disable_unprepare(dwc->bus_clk);
> +}
> +
> static void dwc3_core_exit(struct dwc3 *dwc)
> {
> dwc3_event_buffers_cleanup(dwc);
> @@ -758,7 +790,7 @@ static void dwc3_core_exit(struct dwc3 *dwc)
> usb_phy_set_suspend(dwc->usb3_phy, 1);
> phy_power_off(dwc->usb2_generic_phy);
> phy_power_off(dwc->usb3_generic_phy);
> - clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
> + dwc3_clk_disable(dwc);
> reset_control_assert(dwc->reset);
> }
>
> @@ -1605,25 +1637,31 @@ static int dwc3_probe(struct platform_device *pdev)
> return PTR_ERR(dwc->reset);
>
> if (dev->of_node) {
> - ret = devm_clk_bulk_get_all(dev, &dwc->clks);
> - if (ret == -EPROBE_DEFER)
> - return ret;
> /*
> * Clocks are optional, but new DT platforms should support all
> * clocks as required by the DT-binding.
> */
> - if (ret < 0)
> - dwc->num_clks = 0;
> - else
> - dwc->num_clks = ret;
> + dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
> + if (IS_ERR(dwc->bus_clk))
> + return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
> + "could not get bus clock\n");
>
> + dwc->ref_clk = devm_clk_get_optional(dev, "ref");
> + if (IS_ERR(dwc->ref_clk))
> + return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
> + "could not get ref clock\n");
> +
> + dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
> + if (IS_ERR(dwc->susp_clk))
> + return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
> + "could not get suspend clock\n");
> }
>
> ret = reset_control_deassert(dwc->reset);
> if (ret)
> return ret;
>
> - ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks);
> + ret = dwc3_clk_enable(dwc);
> if (ret)
> goto assert_reset;
>
> @@ -1711,7 +1749,7 @@ static int dwc3_probe(struct platform_device *pdev)
> pm_runtime_disable(&pdev->dev);
>
> disable_clks:
> - clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
> + dwc3_clk_disable(dwc);
> assert_reset:
> reset_control_assert(dwc->reset);
>
> @@ -1755,7 +1793,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
> if (ret)
> return ret;
>
> - ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks);
> + ret = dwc3_clk_enable(dwc);
> if (ret)
> goto assert_reset;
>
> @@ -1766,7 +1804,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
> return 0;
>
> disable_clks:
> - clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
> + dwc3_clk_disable(dwc);
> assert_reset:
> reset_control_assert(dwc->reset);
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index e1cc3f7398fb..45cfa7d9f27a 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -978,8 +978,9 @@ struct dwc3_scratchpad_array {
> * @eps: endpoint array
> * @gadget: device side representation of the peripheral controller
> * @gadget_driver: pointer to the gadget driver
> - * @clks: array of clocks
> - * @num_clks: number of clocks
> + * @bus_clk: clock for accessing the registers
> + * @ref_clk: reference clock
> + * @susp_clk: clock used when the SS phy is in low power (S3) state
> * @reset: reset control
> * @regs: base address for our registers
> * @regs_size: address space size
> @@ -1134,8 +1135,9 @@ struct dwc3 {
> struct usb_gadget *gadget;
> struct usb_gadget_driver *gadget_driver;
>
> - struct clk_bulk_data *clks;
> - int num_clks;
> + struct clk *bus_clk;
> + struct clk *ref_clk;
> + struct clk *susp_clk;
>
> struct reset_control *reset;
>
Reviewed-by: Robert Hancock <robert.hancock@...ian.com>
Powered by blists - more mailing lists