| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220120175747.43403-3-krzysztof.kozlowski@canonical.com>
Date: Thu, 20 Jan 2022 18:57:45 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Benson Leung <bleung@...omium.org>,
Guenter Roeck <groeck@...omium.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Andi Shyti <andi@...zian.org>, Mark Brown <broonie@...nel.org>,
Sam Protsenko <semen.protsenko@...aro.org>,
Pratyush Yadav <p.yadav@...com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-spi@...r.kernel.org
Cc: Alim Akhtar <alim.akhtar@...sung.com>
Subject: [PATCH v5 2/4] spi: dt-bindings: samsung: convert to dtschema
Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) SPI
controller bindings to DT schema format.
The conversion also drops requirement from providing controller-data and
its data for each of SPI peripheral device nodes. The dtschema cannot
express this and the requirement is being relaxed in the driver now.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@...aro.org>
---
.../bindings/soc/samsung/exynos-usi.yaml | 2 +-
.../spi/samsung,spi-peripheral-props.yaml | 33 ++++
.../devicetree/bindings/spi/samsung,spi.yaml | 187 ++++++++++++++++++
.../bindings/spi/spi-peripheral-props.yaml | 1 +
.../devicetree/bindings/spi/spi-samsung.txt | 122 ------------
MAINTAINERS | 2 +-
6 files changed, 223 insertions(+), 124 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-samsung.txt
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index 273f2d95a043..e72b6a3fae99 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -22,7 +22,7 @@ description: |
[1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
[2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
- [3] Documentation/devicetree/bindings/spi/spi-samsung.txt
+ [3] Documentation/devicetree/bindings/spi/samsung,spi.yaml
properties:
$nodename:
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
new file mode 100644
index 000000000000..f0db3fb3d688
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
+
+description:
+ See spi-peripheral-props.yaml for more info.
+
+properties:
+ controller-data:
+ type: object
+ additionalProperties: false
+
+ properties:
+ samsung,spi-feedback-delay:
+ description: |
+ The sampling phase shift to be applied on the miso line (to account
+ for any lag in the miso line). Valid values:
+ - 0: No phase shift.
+ - 1: 90 degree phase shift sampling.
+ - 2: 180 degree phase shift sampling.
+ - 3: 270 degree phase shift sampling.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
new file mode 100644
index 000000000000..61c77088e8ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
+
+description:
+ All the SPI controller nodes should be represented in the aliases node using
+ the following format 'spi{n}' where n is a unique number for the alias.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
+ - samsung,s3c6410-spi
+ - samsung,s5pv210-spi # for S5PV210 and S5PC110
+ - samsung,exynos5433-spi
+ - const: samsung,exynos7-spi
+ deprecated: true
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ maxItems: 3
+
+ cs-gpios: true
+
+ dmas:
+ minItems: 2
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ no-cs-readback:
+ description:
+ The CS line is disconnected, therefore the device should not operate
+ based on CS signalling.
+ type: boolean
+
+ num-cs:
+ minimum: 1
+ maximum: 4
+ default: 1
+
+ samsung,spi-src-clk:
+ description:
+ If the spi controller includes a internal clock mux to select the clock
+ source for the spi bus clock, this property can be used to indicate the
+ clock to be used for driving the spi bus clock. If not specified, the
+ clock number 0 is used as default.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+ - interrupts
+ - reg
+
+allOf:
+ - $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5433-spi
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: spi
+ - enum:
+ - spi_busclk0
+ - spi_busclk1
+ - spi_busclk2
+ - spi_busclk3
+ - const: spi_ioclk
+ else:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: spi
+ - enum:
+ - spi_busclk0
+ - spi_busclk1
+ - spi_busclk2
+ - spi_busclk3
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5433.h>
+ #include <dt-bindings/clock/samsung,s2mps11.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi@...30000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d30000 0x100>;
+ interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&pdma0 11>, <&pdma0 10>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+ clock-names = "spi",
+ "spi_busclk0",
+ "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ num-cs = <1>;
+
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+
+ audio-codec@0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ clocks = <&pmu_system_controller 0>,
+ <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "mclk1", "mclk2";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ wlf,micd-detect-debounce = <300>;
+ wlf,micd-bias-start-time = <0x1>;
+ wlf,micd-rate = <0x7>;
+ wlf,micd-dbtime = <0x2>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0x0 1 0>;
+ wlf,hpdet-channel = <1>;
+ wlf,gpsw = <0x1>;
+ wlf,inmode = <2 0 2 0>;
+
+ wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+ wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+ /* core supplies */
+ AVDD-supply = <&ldo18_reg>;
+ DBVDD1-supply = <&ldo18_reg>;
+ CPVDD-supply = <&ldo18_reg>;
+ DBVDD2-supply = <&ldo18_reg>;
+ DBVDD3-supply = <&ldo18_reg>;
+ SPKVDDL-supply = <&ldo18_reg>;
+ SPKVDDR-supply = <&ldo18_reg>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 5dd209206e88..df885eeb144f 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -85,5 +85,6 @@ properties:
# The controller specific properties go here.
allOf:
- $ref: cdns,qspi-nor-peripheral-props.yaml#
+ - $ref: samsung,spi-peripheral-props.yaml#
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
deleted file mode 100644
index 49028a4f5df1..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ /dev/null
@@ -1,122 +0,0 @@
-* Samsung SPI Controller
-
-The Samsung SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required SoC Specific Properties:
-
-- compatible: should be one of the following.
- - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
- - samsung,s3c6410-spi: for s3c6410 platforms
- - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
- - samsung,exynos5433-spi: for exynos5433 compatible controllers
- - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED>
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
- depends on the interrupt controller.
-
-- dmas : Two or more DMA channel specifiers following the convention outlined
- in bindings/dma/dma.txt
-
-- dma-names: Names for the dma channels. There must be at least one channel
- named "tx" for transmit and named "rx" for receive.
-
-- clocks: specifies the clock IDs provided to the SPI controller; they are
- required for interacting with the controller itself, for synchronizing the bus
- and as I/O clock (the latter is required by exynos5433 and exynos7).
-
-- clock-names: string names of the clocks in the 'clocks' property; for all the
- the devices the names must be "spi", "spi_busclkN" (where N is determined by
- "samsung,spi-src-clk"), while Exynos5433 should specify a third clock
- "spi_ioclk" for the I/O clock.
-
-Required Board Specific Properties:
-
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Board Specific Properties:
-
-- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
- select the clock source for the spi bus clock, this property can be used to
- indicate the clock to be used for driving the spi bus clock. If not specified,
- the clock number 0 is used as default.
-
-- num-cs: Specifies the number of chip select lines supported. If
- not specified, the default number of chip select lines is set to 1.
-
-- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt)
-
-- no-cs-readback: the CS line is disconnected, therefore the device should not
- operate based on CS signalling.
-
-SPI Controller specific data in SPI slave nodes:
-
-- The spi slave nodes should provide the following information which is required
- by the spi controller.
-
- - samsung,spi-feedback-delay: The sampling phase shift to be applied on the
- miso line (to account for any lag in the miso line). The following are the
- valid values.
-
- - 0: No phase shift.
- - 1: 90 degree phase shift sampling.
- - 2: 180 degree phase shift sampling.
- - 3: 270 degree phase shift sampling.
-
-Aliases:
-
-- All the SPI controller nodes should be represented in the aliases node using
- the following format 'spi{n}' where n is a unique number for the alias.
-
-
-Example:
-
-- SoC Specific Portion:
-
- spi_0: spi@...20000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
- dmas = <&pdma0 5
- &pdma0 4>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
-- Board Specific Portion:
-
- spi_0: spi@...20000 {
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_bus>;
- cs-gpios = <&gpa2 5 0>;
-
- w25q80bw@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <10000>;
-
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@...00 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ea5655a29c3..1f951bc877f0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17054,7 +17054,7 @@ M: Andi Shyti <andi@...zian.org>
L: linux-spi@...r.kernel.org
L: linux-samsung-soc@...r.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/spi/spi-samsung.txt
+F: Documentation/devicetree/bindings/spi/samsung,spi*.yaml
F: drivers/spi/spi-s3c*
F: include/linux/platform_data/spi-s3c64xx.h
F: include/linux/spi/s3c24xx-fiq.h
--
2.32.0
Powered by blists - more mailing lists