| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220121074508.42168-5-liang.yang@amlogic.com>
Date: Fri, 21 Jan 2022 15:45:08 +0800
From: Liang Yang <liang.yang@...ogic.com>
To: Neil Armstrong <narmstrong@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>, <linux-clk@...r.kernel.org>
CC: Liang Yang <liang.yang@...ogic.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Jianxin Pan <jianxin.pan@...ogic.com>,
Victor Wan <victor.wan@...ogic.com>,
XianWei Zhao <xianwei.zhao@...ogic.com>,
Kelvin Zhang <kelvin.zhang@...ogic.com>,
BiChao Zheng <bichao.zheng@...ogic.com>,
YongHui Yu <yonghui.yu@...ogic.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-amlogic@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v10 4/4] clk: meson: add sub MMC clock controller driver
The patch will add a MMC clock controller driver which used by MMC or NAND,
It provide a mux and divider clock, and three phase clocks - core, tx, tx.
Two clocks are provided as the parent of MMC clock controller from
upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.
To specify which clock the MMC or NAND driver may consume,
the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header
can be used in the device tree sources.
Signed-off-by: Liang Yang <liang.yang@...ogic.com>
---
drivers/clk/meson/Kconfig | 14 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/mmc-clkc.c | 302 +++++++++++++++++++++++++++++++++++
3 files changed, 317 insertions(+)
create mode 100644 drivers/clk/meson/mmc-clkc.c
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index bb0f59eea366..5f344a0892cb 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -39,6 +39,20 @@ config COMMON_CLK_MESON_AO_CLKC
select COMMON_CLK_MESON_REGMAP
select RESET_CONTROLLER
+config COMMON_CLK_MMC_MESON
+ tristate "Meson MMC Sub Clock Controller Driver"
+ depends on ARCH_MESON || COMPILE_TEST
+ select MFD_SYSCON
+ select COMMON_CLK_AMLOGIC
+ select COMMON_CLK_MESON_PHASE
+ select COMMON_CLK_MESON_PHASE_DELAY
+ select COMMON_CLK_MESON_SCLK_DIV
+ help
+ Support for the MMC sub clock controller on
+ Amlogic Meson Platform, which includes S905 (GXBB, GXL),
+ A113D/X (AXG) devices. Say Y if you want this
+ clock enabled.
+
config COMMON_CLK_MESON_EE_CLKC
tristate
select COMMON_CLK_MESON_REGMAP
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 99fe4eeed000..7a7ffb37a726 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
new file mode 100644
index 000000000000..e42c4015c7a3
--- /dev/null
+++ b/drivers/clk/meson/mmc-clkc.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/amlogic,mmc-clkc.h>
+
+#include "sclk-div.h"
+#include "clk-phase-delay.h"
+#include "clk-regmap.h"
+#include "clk-phase.h"
+
+/* clock ID used by internal driver */
+
+#define SD_EMMC_CLOCK 0
+#define CLK_DELAY_STEP_PS_GX 200
+#define CLK_DELAY_STEP_PS_AXG 78
+#define MUX_CLK_NUM_PARENTS 2
+#define MMC_MAX_CLKS 4
+
+static struct clk_parent_data mmc_clkc_parent_data[MUX_CLK_NUM_PARENTS];
+
+struct mmc_clkc_data {
+ struct meson_clk_phase_delay_data tx;
+ struct meson_clk_phase_delay_data rx;
+};
+
+static struct clk_regmap_mux_data mmc_clkc_mux_data = {
+ .offset = SD_EMMC_CLOCK,
+ .mask = 0x3,
+ .shift = 6,
+};
+
+static const struct meson_sclk_div_data mmc_clkc_div_data = {
+ .div = {
+ .reg_off = SD_EMMC_CLOCK,
+ .width = 6,
+ },
+ .flags = MESON_SCLK_ONE_BASED,
+};
+
+static struct meson_clk_phase_data mmc_clkc_core_phase = {
+ .ph = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 8,
+ .width = 2,
+ }
+};
+
+static const struct mmc_clkc_data mmc_clkc_gx_data = {
+ .tx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 10,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 16,
+ .width = 4,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS_GX,
+ },
+ .rx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 12,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 20,
+ .width = 4,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS_GX,
+ },
+};
+
+static const struct mmc_clkc_data mmc_clkc_axg_data = {
+ .tx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 10,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 16,
+ .width = 6,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS_AXG,
+ },
+ .rx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 12,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 22,
+ .width = 6,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS_AXG,
+ },
+};
+
+static const struct of_device_id mmc_clkc_match_table[] = {
+ {
+ .compatible = "amlogic,gx-mmc-clkc",
+ .data = &mmc_clkc_gx_data
+ },
+ {
+ .compatible = "amlogic,axg-mmc-clkc",
+ .data = &mmc_clkc_axg_data
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mmc_clkc_match_table);
+
+static struct clk_regmap *
+mmc_clkc_register_clk(struct device *dev, struct regmap *map,
+ struct clk_init_data *init,
+ const char *suffix, void *data)
+{
+ struct clk_regmap *clk;
+ char *name;
+ int ret;
+
+ clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return ERR_PTR(-ENOMEM);
+
+ name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ init->name = name;
+ clk->map = map;
+ clk->data = data;
+ clk->hw.init = init;
+ ret = devm_clk_hw_register(dev, &clk->hw);
+ if (ret)
+ clk = ERR_PTR(ret);
+
+ kfree(name);
+ return clk;
+}
+
+static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
+ struct regmap *map)
+{
+ struct clk_init_data init = {0};
+ struct clk_regmap *mux;
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ char name[8];
+
+ snprintf(name, sizeof(name), "clkin%d", i);
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ if (clk != ERR_PTR(-EPROBE_DEFER))
+ dev_err_probe(dev, PTR_ERR(clk),
+ "Missing clock\n");
+ return ERR_CAST(clk);
+ }
+
+ mmc_clkc_parent_data[i].fw_name = __clk_get_name(clk);
+ }
+
+ init.ops = &clk_regmap_mux_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_data = mmc_clkc_parent_data;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
+
+ mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
+ if (IS_ERR(mux))
+ dev_err(dev, "Mux clock registration failed\n");
+
+ return mux;
+}
+
+static struct clk_regmap *
+mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map,
+ char *suffix, const struct clk_hw *hw,
+ unsigned long flags,
+ const struct clk_ops *ops, void *data)
+{
+ struct clk_init_data init;
+ struct clk_regmap *clk;
+ const char *parent_name = clk_hw_get_name(hw);
+
+ init.ops = ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
+ if (IS_ERR(clk))
+ dev_err(dev, "%s clock registration failed\n", suffix);
+
+ return clk;
+}
+
+static int mmc_clkc_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *onecell_data;
+ struct device *dev = &pdev->dev;
+ const struct mmc_clkc_data *data;
+ struct regmap *map;
+ struct clk_regmap *clk, *core;
+ struct meson_sclk_div_data *div_data, *tx, *rx;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ /* cast to drop the const */
+ tx = (struct meson_sclk_div_data *)&data->tx;
+ rx = (struct meson_sclk_div_data *)&data->rx;
+
+ map = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(map)) {
+ dev_err(dev, "could not find mmc clock controller\n");
+ return PTR_ERR(map);
+ }
+
+ onecell_data = devm_kzalloc(dev,
+ struct_size(onecell_data, hws,
+ MMC_MAX_CLKS),
+ GFP_KERNEL);
+ if (!onecell_data)
+ return -ENOMEM;
+
+ clk = mmc_clkc_register_mux(dev, map);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL);
+ if (!div_data)
+ return -ENOMEM;
+
+ memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data));
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "div",
+ &clk->hw,
+ CLK_SET_RATE_PARENT,
+ &meson_sclk_div_ops,
+ div_data);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_DIV] = &clk->hw;
+ core = mmc_clkc_register_clk_with_parent(dev, map, "core",
+ &clk->hw,
+ CLK_SET_RATE_PARENT,
+ &meson_clk_phase_ops,
+ &mmc_clkc_core_phase);
+ if (IS_ERR(core))
+ return PTR_ERR(core);
+ onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw;
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "rx",
+ &core->hw, 0,
+ &meson_clk_phase_delay_ops,
+ rx);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+ onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw;
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "tx",
+ &core->hw, 0,
+ &meson_clk_phase_delay_ops,
+ tx);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw;
+ onecell_data->num = MMC_MAX_CLKS;
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ onecell_data);
+}
+
+static struct platform_driver mmc_clkc_driver = {
+ .probe = mmc_clkc_probe,
+ .driver = {
+ .name = "meson-mmc-clkc",
+ .of_match_table = of_match_ptr(mmc_clkc_match_table),
+ },
+};
+
+module_platform_driver(mmc_clkc_driver);
+
+MODULE_DESCRIPTION("Amlogic AXG MMC clock driver");
+MODULE_AUTHOR("Jianxin Pan <jianxin.pan@...ogic.com>");
+MODULE_LICENSE("GPL v2");
--
2.34.1
Powered by blists - more mailing lists