[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFpu0mGchoqdzE-qKc6=9ogncnTCwN8AR7g1wcMZLyRFsw@mail.gmail.com>
Date: Fri, 21 Jan 2022 13:41:27 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org, Xiyu Yang <xiyuyang19@...an.edu.cn>,
Xin Xiong <xiongx18@...an.edu.cn>,
Xin Tan <tanxin.ctf@...il.com>,
Tony Lindgren <tony@...mide.com>,
Yang Li <yang.lee@...ux.alibaba.com>,
linux-mmc@...r.kernel.org, stable <stable@...r.kernel.org>,
whitehat002 <hackyzh002@...il.com>
Subject: Re: [PATCH] moxart: fix potential use-after-free on remove path
On Fri, 14 Jan 2022 at 08:59, Greg Kroah-Hartman
<gregkh@...uxfoundation.org> wrote:
>
> It was reported that the mmc host structure could be accessed after it
> was freed in moxart_remove(), so fix this by saving the base register of
> the device and using it instead of the pointer dereference.
>
> Cc: Ulf Hansson <ulf.hansson@...aro.org>
> Cc: Xiyu Yang <xiyuyang19@...an.edu.cn>
> Cc: Xin Xiong <xiongx18@...an.edu.cn>
> Cc: Xin Tan <tanxin.ctf@...il.com>
> Cc: Tony Lindgren <tony@...mide.com>
> Cc: Yang Li <yang.lee@...ux.alibaba.com>
> Cc: linux-mmc@...r.kernel.org
> Cc: stable <stable@...r.kernel.org>
> Reported-by: whitehat002 <hackyzh002@...il.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> ---
> drivers/mmc/host/moxart-mmc.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
> index 16d1c7a43d33..f5d96940a9b8 100644
> --- a/drivers/mmc/host/moxart-mmc.c
> +++ b/drivers/mmc/host/moxart-mmc.c
> @@ -697,6 +697,7 @@ static int moxart_remove(struct platform_device *pdev)
> {
> struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
> struct moxart_host *host = mmc_priv(mmc);
> + void __iomem *base = host->base;
>
> dev_set_drvdata(&pdev->dev, NULL);
>
> @@ -707,10 +708,10 @@ static int moxart_remove(struct platform_device *pdev)
> mmc_remove_host(mmc);
> mmc_free_host(mmc);
>
> - writel(0, host->base + REG_INTERRUPT_MASK);
> - writel(0, host->base + REG_POWER_CONTROL);
> - writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
> - host->base + REG_CLOCK_CONTROL);
Rather than doing it like this, I think it would be easier to move
mmc_free_host() below this part. That's usually what mmc host drivers
do clean up things in ->remove().
> + writel(0, base + REG_INTERRUPT_MASK);
> + writel(0, base + REG_POWER_CONTROL);
> + writel(readl(base + REG_CLOCK_CONTROL) | CLK_OFF,
> + base + REG_CLOCK_CONTROL);
>
> return 0;
> }
Kind regards
Uffe
Powered by blists - more mailing lists