| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220121142904.4091481-15-p.yadav@ti.com>
Date: Fri, 21 Jan 2022 19:59:04 +0530
From: Pratyush Yadav <p.yadav@...com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>
CC: Pratyush Yadav <p.yadav@...com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Nikhil Devshatwar <nikhil.nd@...com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Benoit Parrot <bparrot@...com>,
Maxime Ripard <mripard@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Niklas Söderlund
<niklas.soderlund+renesas@...natech.se>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-media@...r.kernel.org>
Subject: [PATCH v6 14/14] media: dt-bindings: Convert Cadence CSI2RX binding to YAML
Convert the Cadence CSI2RX binding to use YAML schema.
Signed-off-by: Pratyush Yadav <p.yadav@...com>
Reviewed-by: Rob Herring <robh@...nel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---
(no changes since v5)
Changes in v5:
- Move clock description in comments under the clocks property.
- Make ports required.
- Add Rob's and Laurent's R-by.
Changes in v4:
- Add power-domains property.
- Drop maxItems from clock-names.
- Drop the type for data-lanes.
- Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
instead.
Changes in v3:
- Add compatible: contains: const: cdns,csi2rx to allow SoC specific
compatible.
- Add more constraints for data-lanes property.
Changes in v2:
- New in v2.
.../devicetree/bindings/media/cdns,csi2rx.txt | 100 ----------
.../bindings/media/cdns,csi2rx.yaml | 176 ++++++++++++++++++
2 files changed, 176 insertions(+), 100 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
deleted file mode 100644
index 6b02a0657ad9..000000000000
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-Cadence MIPI-CSI2 RX controller
-===============================
-
-The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
-lanes in input, and 4 different pixel streams in output.
-
-Required properties:
- - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
- - reg: base address and size of the memory mapped region
- - clocks: phandles to the clocks driving the controller
- - clock-names: must contain:
- * sys_clk: main clock
- * p_clk: register bank clock
- * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
- implemented in hardware, between 0 and 3
-
-Optional properties:
- - phys: phandle to the external D-PHY, phy-names must be provided
- - phy-names: must contain "dphy", if the implementation uses an
- external D-PHY
-
-Required subnodes:
- - ports: A ports node with one port child node per device input and output
- port, in accordance with the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- port nodes are numbered as follows:
-
- Port Description
- -----------------------------
- 0 CSI-2 input
- 1 Stream 0 output
- 2 Stream 1 output
- 3 Stream 2 output
- 4 Stream 3 output
-
- The stream output port nodes are optional if they are not
- connected to anything at the hardware level or implemented
- in the design.Since there is only one endpoint per port,
- the endpoints are not numbered.
-
-
-Example:
-
-csi2rx: csi-bridge@...60000 {
- compatible = "cdns,csi2rx";
- reg = <0x0d060000 0x1000>;
- clocks = <&byteclock>, <&byteclock>
- <&coreclock>, <&coreclock>,
- <&coreclock>, <&coreclock>;
- clock-names = "sys_clk", "p_clk",
- "pixel_if0_clk", "pixel_if1_clk",
- "pixel_if2_clk", "pixel_if3_clk";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- csi2rx_in_sensor: endpoint {
- remote-endpoint = <&sensor_out_csi2rx>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- csi2rx_out_grabber0: endpoint {
- remote-endpoint = <&grabber0_in_csi2rx>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- csi2rx_out_grabber1: endpoint {
- remote-endpoint = <&grabber1_in_csi2rx>;
- };
- };
-
- port@3 {
- reg = <3>;
-
- csi2rx_out_grabber2: endpoint {
- remote-endpoint = <&grabber2_in_csi2rx>;
- };
- };
-
- port@4 {
- reg = <4>;
-
- csi2rx_out_grabber3: endpoint {
- remote-endpoint = <&grabber3_in_csi2rx>;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
new file mode 100644
index 000000000000..399fe619377d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MIPI-CSI2 RX controller
+
+description: |
+ The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
+ lanes in input, and 4 different pixel streams in output.
+
+maintainers:
+ - Pratyush Yadav <p.yadav@...com>
+
+properties:
+ compatible:
+ contains:
+ const: cdns,csi2rx
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ items:
+ - description: Main clock
+ - description: Register bank clock
+ - description: Pixel stream 0 output clock
+ - description: Pixel stream 1 output clock
+ - description: Pixel stream 2 output clock
+ - description: Pixel stream 3 output clock
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: sys_clk
+ - const: p_clk
+ - const: pixel_if0_clk
+ - const: pixel_if1_clk
+ - const: pixel_if2_clk
+ - const: pixel_if3_clk
+
+ phys:
+ maxItems: 1
+ description: phandle to the external D-PHY
+
+ phy-names:
+ items:
+ - const: dphy
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 input
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 0 output
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 1 output
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 2 output
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 3 output
+
+ required:
+ - port@0
+
+
+dependencies:
+ phys: [ 'phy-names' ]
+ phy-names: [ 'phys' ]
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ csi2rx: csi-bridge@...0000 {
+ compatible = "cdns,csi2rx";
+ reg = <0x0d060000 0x1000>;
+ clocks = <&byteclock>, <&byteclock>,
+ <&coreclock>, <&coreclock>,
+ <&coreclock>, <&coreclock>;
+ clock-names = "sys_clk", "p_clk",
+ "pixel_if0_clk", "pixel_if1_clk",
+ "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi2rx_in_sensor: endpoint {
+ remote-endpoint = <&sensor_out_csi2rx>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_out_grabber0: endpoint {
+ remote-endpoint = <&grabber0_in_csi2rx>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ csi2rx_out_grabber1: endpoint {
+ remote-endpoint = <&grabber1_in_csi2rx>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ csi2rx_out_grabber2: endpoint {
+ remote-endpoint = <&grabber2_in_csi2rx>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ csi2rx_out_grabber3: endpoint {
+ remote-endpoint = <&grabber3_in_csi2rx>;
+ };
+ };
+ };
+ };
--
2.34.1
Powered by blists - more mailing lists