| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220122171420.7036e031@jic23-huawei>
Date: Sat, 22 Jan 2022 17:14:20 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
Robin van der Gracht <robin@...tonic.nl>,
linux-iio@...r.kernel.org, Lars-Peter Clausen <lars@...afoo.de>
Subject: Re: [PATCH v3 1/2] iio: adc: tsc2046: add .read_raw support
On Mon, 17 Jan 2022 09:28:51 +0100
Oleksij Rempel <o.rempel@...gutronix.de> wrote:
> Add read_raw() support to make use of iio_hwmon and other iio clients.
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
Change log? If it's just the check against PAGE_SIZE then I'm fine with it, but
maybe I missed something. Much better to have a short description of what
changed here.
Anyhow, I'll assume that's it. Applied to the togreg branch of iio.git and
pushed out as testing to let 0-day poke at it and see if it can find any
problems.
There was a little fuzz here for patch 2, presumably because the fix that is
in flight. Hopefully that won't cause us too many problems in linux-next or
at merge time.
Thanks,
Jonathan
> drivers/iio/adc/ti-tsc2046.c | 118 ++++++++++++++++++++++++++++-------
> 1 file changed, 97 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
> index 7ac1fc4b04c2..95771ceba206 100644
> --- a/drivers/iio/adc/ti-tsc2046.c
> +++ b/drivers/iio/adc/ti-tsc2046.c
> @@ -86,6 +86,7 @@
> #define TI_TSC2046_EXT_POLL_CNT 3
> #define TI_TSC2046_POLL_CNT \
> (TI_TSC2046_MIN_POLL_CNT + TI_TSC2046_EXT_POLL_CNT)
> +#define TI_TSC2046_INT_VREF 2500
>
> /* Represents a HW sample */
> struct tsc2046_adc_atom {
> @@ -166,9 +167,6 @@ struct tsc2046_adc_priv {
> struct tsc2046_adc_atom *rx;
> struct tsc2046_adc_atom *tx;
>
> - struct tsc2046_adc_atom *rx_one;
> - struct tsc2046_adc_atom *tx_one;
> -
> unsigned int count;
> unsigned int groups;
> u32 effective_speed_hz;
> @@ -184,6 +182,8 @@ struct tsc2046_adc_priv {
> .type = IIO_VOLTAGE, \
> .indexed = 1, \
> .channel = index, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> .datasheet_name = "#name", \
> .scan_index = index, \
> .scan_type = { \
> @@ -247,6 +247,14 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx,
> else
> pd = 0;
>
> + switch (ch_idx) {
> + case TI_TSC2046_ADDR_TEMP1:
> + case TI_TSC2046_ADDR_AUX:
> + case TI_TSC2046_ADDR_VBAT:
> + case TI_TSC2046_ADDR_TEMP0:
> + pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON;
> + }
> +
> return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd;
> }
>
> @@ -258,16 +266,50 @@ static u16 tsc2046_adc_get_value(struct tsc2046_adc_atom *buf)
> static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx,
> u32 *effective_speed_hz)
> {
> + struct tsc2046_adc_ch_cfg *ch = &priv->ch_cfg[ch_idx];
> + struct tsc2046_adc_atom *rx_buf, *tx_buf;
> + unsigned int val, val_normalized = 0;
> + int ret, i, count_skip = 0, max_count;
> struct spi_transfer xfer;
> struct spi_message msg;
> - int ret;
> + u8 cmd;
> +
> + if (!effective_speed_hz) {
> + count_skip = tsc2046_adc_time_to_count(priv, ch->settling_time_us);
> + max_count = count_skip + ch->oversampling_ratio;
> + } else {
> + max_count = 1;
> + }
> +
> + if (sizeof(*tx_buf) * max_count > PAGE_SIZE)
> + return -ENOSPC;
> +
> + tx_buf = kcalloc(max_count, sizeof(*tx_buf), GFP_KERNEL);
> + if (!tx_buf)
> + return -ENOMEM;
> +
> + rx_buf = kcalloc(max_count, sizeof(*rx_buf), GFP_KERNEL);
> + if (!rx_buf) {
> + ret = -ENOMEM;
> + goto free_tx;
> + }
> +
> + /*
> + * Do not enable automatic power down on working samples. Otherwise the
> + * plates will never be completely charged.
> + */
> + cmd = tsc2046_adc_get_cmd(priv, ch_idx, true);
> +
> + for (i = 0; i < max_count - 1; i++)
> + tx_buf[i].cmd = cmd;
> +
> + /* automatically power down on last sample */
> + tx_buf[i].cmd = tsc2046_adc_get_cmd(priv, ch_idx, false);
>
> memset(&xfer, 0, sizeof(xfer));
> - priv->tx_one->cmd = tsc2046_adc_get_cmd(priv, ch_idx, false);
> - priv->tx_one->data = 0;
> - xfer.tx_buf = priv->tx_one;
> - xfer.rx_buf = priv->rx_one;
> - xfer.len = sizeof(*priv->tx_one);
> + xfer.tx_buf = tx_buf;
> + xfer.rx_buf = rx_buf;
> + xfer.len = sizeof(*tx_buf) * max_count;
> spi_message_init_with_transfers(&msg, &xfer, 1);
>
> /*
> @@ -278,13 +320,25 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx,
> if (ret) {
> dev_err_ratelimited(&priv->spi->dev, "SPI transfer failed %pe\n",
> ERR_PTR(ret));
> - return ret;
> + goto free_bufs;
> }
>
> if (effective_speed_hz)
> *effective_speed_hz = xfer.effective_speed_hz;
>
> - return tsc2046_adc_get_value(priv->rx_one);
> + for (i = 0; i < max_count - count_skip; i++) {
> + val = tsc2046_adc_get_value(&rx_buf[count_skip + i]);
> + val_normalized += val;
> + }
> +
> + ret = DIV_ROUND_UP(val_normalized, max_count - count_skip);
> +
> +free_bufs:
> + kfree(rx_buf);
> +free_tx:
> + kfree(tx_buf);
> +
> + return ret;
> }
>
> static size_t tsc2046_adc_group_set_layout(struct tsc2046_adc_priv *priv,
> @@ -391,6 +445,37 @@ static irqreturn_t tsc2046_adc_trigger_handler(int irq, void *p)
> return IRQ_HANDLED;
> }
>
> +static int tsc2046_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long m)
> +{
> + struct tsc2046_adc_priv *priv = iio_priv(indio_dev);
> + int ret;
> +
> + switch (m) {
> + case IIO_CHAN_INFO_RAW:
> + ret = tsc2046_adc_read_one(priv, chan->channel, NULL);
> + if (ret < 0)
> + return ret;
> +
> + *val = ret;
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + /*
> + * Note: the TSC2046 has internal voltage divider on the VBAT
> + * line. This divider can be influenced by external divider.
> + * So, it is better to use external voltage-divider driver
> + * instead, which is calculating complete chain.
> + */
> + *val = TI_TSC2046_INT_VREF;
> + *val2 = chan->scan_type.realbits;
> + return IIO_VAL_FRACTIONAL_LOG2;
> + }
> +
> + return -EINVAL;
> +}
> +
> static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev,
> const unsigned long *active_scan_mask)
> {
> @@ -421,6 +506,7 @@ static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev,
> }
>
> static const struct iio_info tsc2046_adc_info = {
> + .read_raw = tsc2046_adc_read_raw,
> .update_scan_mode = tsc2046_adc_update_scan_mode,
> };
>
> @@ -563,16 +649,6 @@ static int tsc2046_adc_setup_spi_msg(struct tsc2046_adc_priv *priv)
> size_t size;
> int ret;
>
> - priv->tx_one = devm_kzalloc(&priv->spi->dev, sizeof(*priv->tx_one),
> - GFP_KERNEL);
> - if (!priv->tx_one)
> - return -ENOMEM;
> -
> - priv->rx_one = devm_kzalloc(&priv->spi->dev, sizeof(*priv->rx_one),
> - GFP_KERNEL);
> - if (!priv->rx_one)
> - return -ENOMEM;
> -
> /*
> * Make dummy read to set initial power state and get real SPI clock
> * freq. It seems to be not important which channel is used for this
Powered by blists - more mailing lists