| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 23 Jan 2022 23:22:41 +0800
From: Jisheng Zhang <jszhang@...nel.org>
To: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Doug Berger <opendmb@...il.com>,
Joakim Zhang <qiangqing.zhang@....com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Bryan Whitehead <bryan.whitehead@...rochip.com>,
UNGLinuxDriver@...rochip.com, Byungho An <bh74.an@...sung.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com
Subject: [PATCH] net: dsa|ethernet: use bool values to pass bool param of phy_init_eee
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use
true or false instead of 1/0.
Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
---
drivers/net/dsa/b53/b53_common.c | 2 +-
drivers/net/dsa/mt7530.c | 2 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
drivers/net/ethernet/freescale/fec_main.c | 2 +-
drivers/net/ethernet/marvell/mvneta.c | 2 +-
drivers/net/ethernet/microchip/lan743x_ethtool.c | 2 +-
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3867f3d4545f..a3b98992f180 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2186,7 +2186,7 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
{
int ret;
- ret = phy_init_eee(phy, 0);
+ ret = phy_init_eee(phy, false);
if (ret)
return 0;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index b82512e5b33b..bc77a26c825a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2846,7 +2846,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
mcr |= PMCR_RX_FC_EN;
}
- if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) {
+ if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
switch (speed) {
case SPEED_1000:
mcr |= PMCR_FORCE_EEE1G;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 87f1056e29ff..cfe09117fe6c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1368,7 +1368,7 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_eee *e)
if (!p->eee_enabled) {
bcmgenet_eee_enable_set(dev, false);
} else {
- ret = phy_init_eee(dev->phydev, 0);
+ ret = phy_init_eee(dev->phydev, false);
if (ret) {
netif_err(priv, hw, dev, "EEE initialization failed\n");
return ret;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 796133de527e..11227f51404c 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2797,7 +2797,7 @@ static int fec_enet_eee_mode_set(struct net_device *ndev, bool enable)
int ret = 0;
if (enable) {
- ret = phy_init_eee(ndev->phydev, 0);
+ ret = phy_init_eee(ndev->phydev, false);
if (ret)
return ret;
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 83c8908f0cc7..7f44b73024a0 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4169,7 +4169,7 @@ static void mvneta_mac_link_up(struct phylink_config *config,
mvneta_port_up(pp);
if (phy && pp->eee_enabled) {
- pp->eee_active = phy_init_eee(phy, 0) >= 0;
+ pp->eee_active = phy_init_eee(phy, false) >= 0;
mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
}
}
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 91a755efe2e6..5f1e7b8bad4f 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -750,7 +750,7 @@ static int lan743x_ethtool_set_eee(struct net_device *netdev,
}
if (eee->eee_enabled) {
- ret = phy_init_eee(phydev, 0);
+ ret = phy_init_eee(phydev, false);
if (ret) {
netif_err(adapter, drv, adapter->netdev,
"EEE initialization failed\n");
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 32161a56726c..77a0d9d7e65a 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -127,7 +127,7 @@ bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
/* MAC core supports the EEE feature. */
if (priv->hw_cap.eee) {
/* Check if the PHY supports EEE */
- if (phy_init_eee(ndev->phydev, 1))
+ if (phy_init_eee(ndev->phydev, true))
return false;
priv->eee_active = 1;
--
2.34.1
Powered by blists - more mailing lists