[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220123153924.673172-1-miquel.raynal@bootlin.com>
Date: Sun, 23 Jan 2022 16:39:24 +0100
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Patrick Williams <patrick@...cx.xyz>,
Tudor Ambarus <tudor.ambarus@...rochip.com>,
Michael Walle <michael@...le.cc>,
Pratyush Yadav <p.yadav@...com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Joel Stanley <joel@....id.au>, Andrew Jeffery <andrew@...id.au>
Cc: Potin Lai <potin.lai@...ntatw.com>, linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] mtd: aspeed-smc: improve probe resilience
On Wed, 2021-12-29 at 14:33:33 UTC, Patrick Williams wrote:
> The aspeed-smc can have multiple SPI devices attached to it in the
> device tree. If one of the devices is missing or failing the entire
> probe will fail and all MTD devices under the controller will be
> removed. On OpenBMC this results in a kernel panic due to missing
> rootfs:
>
> [ 0.538774] aspeed-smc 1e620000.spi: Using 50 MHz SPI frequency
> [ 0.540471] aspeed-smc 1e620000.spi: w25q01jv-iq (131072 Kbytes)
> [ 0.540750] aspeed-smc 1e620000.spi: CE0 window [ 0x20000000 - 0x28000000 ] 128MB
> [ 0.540943] aspeed-smc 1e620000.spi: CE1 window [ 0x28000000 - 0x2c000000 ] 64MB
> [ 0.541143] aspeed-smc 1e620000.spi: read control register: 203b0041
> [ 0.581442] 5 fixed-partitions partitions found on MTD device bmc
> [ 0.581625] Creating 5 MTD partitions on "bmc":
> [ 0.581854] 0x000000000000-0x0000000e0000 : "u-boot"
> [ 0.584472] 0x0000000e0000-0x000000100000 : "u-boot-env"
> [ 0.586468] 0x000000100000-0x000000a00000 : "kernel"
> [ 0.588465] 0x000000a00000-0x000006000000 : "rofs"
> [ 0.590552] 0x000006000000-0x000008000000 : "rwfs"
> [ 0.592605] aspeed-smc 1e620000.spi: Using 50 MHz SPI frequency
> [ 0.592801] aspeed-smc 1e620000.spi: unrecognized JEDEC id bytes: 00 00 00 00 00 00
> [ 0.593039] Deleting MTD partitions on "bmc":
> [ 0.593175] Deleting u-boot MTD partition
> [ 0.637929] Deleting u-boot-env MTD partition
> [ 0.829527] Deleting kernel MTD partition
> [ 0.856902] Freeing initrd memory: 1032K
> [ 0.866428] Deleting rofs MTD partition
> [ 0.906264] Deleting rwfs MTD partition
> [ 0.986628] aspeed-smc 1e620000.spi: Aspeed SMC probe failed -2
> [ 0.986929] aspeed-smc: probe of 1e620000.spi failed with error -2
> ...
> [ 2.936719] /dev/mtdblock: Can't open blockdev
> mount: mounting /dev/mtdblock on run/initramfs/ro failed: No such file or directory
> [ 2.963030] MTD: Couldn't look up '/dev/mtdblock': -2
> mount: mounting /dev/mtdblock on run/initramfs/rw failed: No such file or directory
>
> Mounting read-write /dev/mtdblock filesystem failed. Please fix and run
> mount /dev/mtdblock run/initramfs/rw -t jffs2 -o rw
> or perform a factory reset with the clean-rwfs-filesystem option.
> Fatal error, triggering kernel panic!
> [ 3.013047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
>
> Many BMC designs have two flash chips so that they can handle a hardware
> failure of one of them. If one chip failed, it doesn't do any good to
> have redundancy if they all get removed anyhow.
>
> Improve the resilience of the probe function to handle one of the
> children being missing or failed. Only in the case where all children
> fail to probe should the controller be failed out.
>
> Signed-off-by: Patrick Williams <patrick@...cx.xyz>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Miquel
Powered by blists - more mailing lists