| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220124184102.642987989@linuxfoundation.org>
Date: Mon, 24 Jan 2022 19:32:46 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Johan Hovold <johan@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Subject: [PATCH 5.15 049/846] media: redrat3: fix control-message timeouts
From: Johan Hovold <johan@...nel.org>
commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@...r.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@...nel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@...all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/media/rc/redrat3.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -404,7 +404,7 @@ static int redrat3_send_cmd(int cmd, str
udev = rr3->udev;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0000, 0x0000, data, sizeof(u8), HZ * 10);
+ 0x0000, 0x0000, data, sizeof(u8), 10000);
if (res < 0) {
dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d",
@@ -480,7 +480,7 @@ static u32 redrat3_get_timeout(struct re
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
+ RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000);
if (ret != len)
dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
else {
@@ -510,7 +510,7 @@ static int redrat3_set_timeout(struct rc
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout),
- HZ * 25);
+ 25000);
dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n",
be32_to_cpu(*timeout), ret);
@@ -542,32 +542,32 @@ static void redrat3_reset(struct redrat3
*val = 0x01;
rc = usb_control_msg(udev, rxpipe, RR3_RESET,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
+ RR3_CPUCS_REG_ADDR, 0, val, len, 25000);
dev_dbg(dev, "reset returned 0x%02x\n", rc);
*val = length_fuzz;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
+ RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000);
dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
*val = (65536 - (minimum_pause * 2000)) / 256;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25);
+ RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000);
dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc);
*val = periods_measure_carrier;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25);
+ RR3_IR_IO_PERIODS_MF, 0, val, len, 25000);
dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val,
rc);
*val = RR3_DRIVER_MAXLENS;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
+ RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000);
dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
kfree(val);
@@ -585,7 +585,7 @@ static void redrat3_get_firmware_rev(str
rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0),
RR3_FW_VERSION,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5);
+ 0, 0, buffer, RR3_FW_VERSION_LEN, 5000);
if (rc >= 0)
dev_info(rr3->dev, "Firmware rev: %s", buffer);
@@ -825,14 +825,14 @@ static int redrat3_transmit_ir(struct rc
pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
ret = usb_bulk_msg(rr3->udev, pipe, irdata,
- sendbuf_len, &ret_len, 10 * HZ);
+ sendbuf_len, &ret_len, 10000);
dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
/* now tell the hardware to transmit what we sent it */
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, irdata, 2, HZ * 10);
+ 0, 0, irdata, 2, 10000);
if (ret < 0)
dev_err(dev, "Error: control msg send failed, rc %d\n", ret);
Powered by blists - more mailing lists