linux-kernel - Re: earlyprintk=xdbc seems broken

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 24 Jan 2022 17:39:08 +0100
From:   Peter Zijlstra <peterz@...radead.org>
To:     Mathias Nyman <mathias.nyman@...ux.intel.com>
Cc:     Greg KH <gregkh@...uxfoundation.org>,
        Dave Hansen <dave.hansen@...el.com>,
        Lu Baolu <baolu.lu@...ux.intel.com>, x86@...nel.org,
        linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        Chunfeng Yun <chunfeng.yun@...iatek.com>
Subject: Re: earlyprintk=xdbc seems broken

On Mon, Jan 24, 2022 at 04:55:22PM +0200, Mathias Nyman wrote:
>  
> > [    0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 0
> > [    4.984106] xhci_dbc:xdbc_start: waiting for connection timed out, DCPORTSC:0xa0
> > [    9.946159] xhci_dbc:xdbc_start: waiting for connection timed out, DCPORTSC:0xa0
> > [    9.946163] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
> >
> > [   12.818364] xhci_hcd 0000:00:0d.0: xHCI Host Controller
> > [   12.818373] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
> > [   12.820360] xhci_hcd 0000:00:0d.0: xHCI Host Controller
> > [   12.820363] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
> > [   12.821036] xhci_hcd 0000:00:14.0: xHCI Host Controller
> > [   12.821040] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
> > [   12.823451] xhci_hcd 0000:00:14.0: xHCI Host Controller
> > [   12.823453] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
> > [   17.115089] usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
> > [   17.115163] usb usb4-port4: config error
> 
> Ok, I see it now.
> Your setup has two xhci controllers, earlypringk=dbc enables dbc on the first xhci
> it finds, which would be at 0000:00:0d.0.
> Your cable is connected to the second xhci host at 0000:00:14.0
> 
> does using "earlyprintk=xdbc1" work?

Very quick testing says it don't work.. but I'll try again later, need
to go cook dinner now.