linux-kernel - [PATCH 3/6] clk: imx6q: disable gpmi_io and ipt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220125085206.8508-4-ceggers@arri.de>
Date:   Tue, 25 Jan 2022 09:52:03 +0100
From:   Christian Eggers <ceggers@...i.de>
To:     Abel Vesa <abel.vesa@....com>
CC:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        Stefan Riedmueller <s.riedmueller@...tec.de>,
        Christian Eggers <ceggers@...i.de>,
        Stefan Riedmueller <S.Riedmueller@...tec.de>
Subject: [PATCH 3/6] clk: imx6q: disable gpmi_io and ipt_io clocks before changing parent

gpmi_io and ipt_io clocks may have been enabled by the boot loader. All
children of enfc_clk_root must be gated in order to prevent glitches
during parent change.

Reparenting of enfc_clk_root may disable pll3_usb_otg. In order to avoid
immediately re-enabling it in imx_register_uart_clocks(), the whole
section has been moved to the bottom of imx6q_clocks_init().

Signed-off-by: Christian Eggers <ceggers@...i.de>
Co-developed-by: Stefan Riedmueller <S.Riedmueller@...tec.de>
Signed-off-by: Stefan Riedmueller <S.Riedmueller@...tec.de>
---
 drivers/clk/imx/clk-imx6q.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index de36f58d551c..fd5c37095ed0 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -927,13 +927,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(hws[IMX6QDL_CLK_IPU2_DI0_SEL]->clk, hws[IMX6QDL_CLK_IPU2_DI0_PRE]->clk);
 	clk_set_parent(hws[IMX6QDL_CLK_IPU2_DI1_SEL]->clk, hws[IMX6QDL_CLK_IPU2_DI1_PRE]->clk);
 
-	/*
-	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
-	 * We can not get the 100MHz from the pll2_pfd0_352m.
-	 * So choose pll2_pfd2_396m as enfc_sel's parent.
-	 */
-	clk_set_parent(hws[IMX6QDL_CLK_ENFC_SEL]->clk, hws[IMX6QDL_CLK_PLL2_PFD2_396M]->clk);
-
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(hws[IMX6QDL_CLK_USBPHY1_GATE]->clk);
 		clk_prepare_enable(hws[IMX6QDL_CLK_USBPHY2_GATE]->clk);
@@ -975,5 +968,25 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	}
 
 	imx_register_uart_clocks(2);
+
+	/*
+	 * The gpmi needs 100MHz frequency in the EDO/Sync mode. We can not get
+	 * the 100MHz from the pll2_pfd0_352m. So choose pll2_pfd2_396m as
+	 * enfc_sel's parent.
+	 *
+	 * gpmi_io and ipt_clk_io clocks may have been enabled by the boot
+	 * loader. All children of enfc_clk_root must be gated in order to
+	 * prevent glitches during parent change. The task of re-enabling
+	 * gpio_io is left to the gpmi-nand driver.
+	 */
+	if (clk_hw_is_enabled(hws[IMX6QDL_CLK_GPMI_IO])) {
+		clk_prepare_enable(hws[IMX6QDL_CLK_GPMI_IO]->clk);
+		clk_disable_unprepare(hws[IMX6QDL_CLK_GPMI_IO]->clk);
+	}
+	if (clk_hw_is_enabled(hws[IMX6QDL_CLK_ENFC])) {
+		clk_prepare_enable(hws[IMX6QDL_CLK_ENFC]->clk);
+		clk_disable_unprepare(hws[IMX6QDL_CLK_ENFC]->clk);
+	}
+	clk_set_parent(hws[IMX6QDL_CLK_ENFC_SEL]->clk, hws[IMX6QDL_CLK_PLL2_PFD2_396M]->clk);
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler