[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220125085634.17972-16-yong.wu@mediatek.com>
Date: Tue, 25 Jan 2022 16:56:14 +0800
From: Yong Wu <yong.wu@...iatek.com>
To: Joerg Roedel <joro@...tes.org>, Rob Herring <robh+dt@...nel.org>,
"Matthias Brugger" <matthias.bgg@...il.com>,
Will Deacon <will@...nel.org>
CC: Robin Murphy <robin.murphy@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Tomasz Figa <tfiga@...omium.org>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<iommu@...ts.linux-foundation.org>,
Hsin-Yi Wang <hsinyi@...omium.org>, <yong.wu@...iatek.com>,
<youlin.pei@...iatek.com>, <anan.sun@...iatek.com>,
<xueqi.zhang@...iatek.com>, <yen-chang.chen@...iatek.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@...labora.com>,
<mingyuan.ma@...iatek.com>, <yf.wang@...iatek.com>,
<libo.kang@...iatek.com>, <chengci.xu@...iatek.com>
Subject: [PATCH v4 15/35] iommu/mediatek: Add SUB_COMMON_3BITS flag
In prevous SoC, the sub common id occupy 2 bits. the mt8195's sub common
id has 3bits. Add a new flag for this. and rename the previous flag to
_2BITS. For readable, I put these two flags together, then move the
other flags. no functional change.
Signed-off-by: Yong Wu <yong.wu@...iatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
drivers/iommu/mtk_iommu.c | 26 ++++++++++++++++----------
drivers/iommu/mtk_iommu.h | 2 +-
2 files changed, 17 insertions(+), 11 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 548fa8448a6e..47d5f34f4db0 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -105,6 +105,8 @@
#define REG_MMU1_INT_ID 0x154
#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7)
#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3)
+#define F_MMU_INT_ID_COMM_ID_EXT(a) (((a) >> 10) & 0x7)
+#define F_MMU_INT_ID_SUB_COMM_ID_EXT(a) (((a) >> 7) & 0x7)
#define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
#define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
@@ -116,13 +118,14 @@
#define HAS_VLD_PA_RNG BIT(2)
#define RESET_AXI BIT(3)
#define OUT_ORDER_WR_EN BIT(4)
-#define HAS_SUB_COMM BIT(5)
-#define WR_THROT_EN BIT(6)
-#define HAS_LEGACY_IVRP_PADDR BIT(7)
-#define IOVA_34_EN BIT(8)
-#define SHARE_PGTABLE BIT(9) /* 2 HW share pgtable */
-#define DCM_DISABLE BIT(10)
-#define NOT_STD_AXI_MODE BIT(11)
+#define HAS_SUB_COMM_2BITS BIT(5)
+#define HAS_SUB_COMM_3BITS BIT(6)
+#define WR_THROT_EN BIT(7)
+#define HAS_LEGACY_IVRP_PADDR BIT(8)
+#define IOVA_34_EN BIT(9)
+#define SHARE_PGTABLE BIT(10) /* 2 HW share pgtable */
+#define DCM_DISABLE BIT(11)
+#define NOT_STD_AXI_MODE BIT(12)
#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
((((pdata)->flags) & (_x)) == (_x))
@@ -290,9 +293,12 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
fault_pa |= (u64)pa34_32 << 32;
fault_port = F_MMU_INT_ID_PORT_ID(regval);
- if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM_2BITS)) {
fault_larb = F_MMU_INT_ID_COMM_ID(regval);
sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
+ } else if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM_3BITS)) {
+ fault_larb = F_MMU_INT_ID_COMM_ID_EXT(regval);
+ sub_comm = F_MMU_INT_ID_SUB_COMM_ID_EXT(regval);
} else {
fault_larb = F_MMU_INT_ID_LARB_ID(regval);
}
@@ -1033,7 +1039,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
static const struct mtk_iommu_plat_data mt6779_data = {
.m4u_plat = M4U_MT6779,
- .flags = HAS_SUB_COMM | OUT_ORDER_WR_EN | WR_THROT_EN |
+ .flags = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
NOT_STD_AXI_MODE,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = single_domain,
@@ -1071,7 +1077,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
static const struct mtk_iommu_plat_data mt8192_data = {
.m4u_plat = M4U_MT8192,
- .flags = HAS_BCLK | HAS_SUB_COMM | OUT_ORDER_WR_EN |
+ .flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
WR_THROT_EN | IOVA_34_EN | NOT_STD_AXI_MODE,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = mt8192_multi_dom,
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index c10f5630e55d..82c51a034e6b 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -20,7 +20,7 @@
#include <dt-bindings/memory/mtk-memory-port.h>
#define MTK_LARB_COM_MAX 8
-#define MTK_LARB_SUBCOM_MAX 4
+#define MTK_LARB_SUBCOM_MAX 8
#define MTK_IOMMU_GROUP_MAX 8
--
2.18.0
Powered by blists - more mailing lists