| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAABZP2z=ESWA1EYf1LGS40ipJxcVOAUkvJHA-rdDP6_0Oqjgsg@mail.gmail.com>
Date: Wed, 26 Jan 2022 00:19:58 +0800
From: Zhouyi Zhou <zhouzhouyi@...il.com>
To: "Paul E. McKenney" <paulmck@...nel.org>
Cc: Paul Menzel <pmenzel@...gen.mpg.de>,
Josh Triplett <josh@...htriplett.org>,
rcu <rcu@...r.kernel.org>, linux-kselftest@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: Problems with rcutorture on ppc64le: allmodconfig(2) and other failures
Hi Paul
On Fri, Jan 21, 2022 at 8:44 AM Zhouyi Zhou <zhouzhouyi@...il.com> wrote:
>
> Thank Paul for your guidance!
>
> On Fri, Jan 21, 2022 at 5:06 AM Paul E. McKenney <paulmck@...nel.org> wrote:
> >
> > On Thu, Jan 20, 2022 at 03:30:54AM +0800, Zhouyi Zhou wrote:
> > > On Thu, Jan 20, 2022 at 2:21 AM Paul E. McKenney <paulmck@...nel.org> wrote:
> > > >
> > > > On Tue, Jan 18, 2022 at 08:46:49PM -0800, Paul E. McKenney wrote:
> > > > > On Wed, Jan 19, 2022 at 10:07:42AM +0800, Zhouyi Zhou wrote:
> > > > > > Thanks Paul for looking into this
> > > > > >
> > > > > > On Wed, Jan 19, 2022 at 7:46 AM Paul E. McKenney <paulmck@...nel.org> wrote:
> > > > > > >
> > > > > > > On Tue, Jan 18, 2022 at 09:29:04AM -0800, Paul E. McKenney wrote:
> > > > > > > > On Tue, Jan 18, 2022 at 08:56:24AM +0100, Paul Menzel wrote:
> > > > > > > > > Dear Zhouyi,
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thank you for your quick response.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Am 18.01.22 um 08:34 schrieb Zhouyi Zhou:
> > > > > > > > >
> > > > > > > > > > I have studied the rcu torture test recently. I am also interested in
> > > > > > > > > > this topic.
> > > > > > > > > > But I can't open
> > > > > > > > > > [1]: https://owww.molgen.mpg.de/~pmenzel/allmodconf-Make.out.txt
> > > > > > > > > > [2]: https://owww.molgen.mpg.de/~pmenzel/rcutorture-log.txt
> > > > > > > > >
> > > > > > > > > Sorry, about that. I should have checked those. I had put them into a
> > > > > > > > > directory:
> > > > > > > > >
> > > > > > > > > [1]: https://owww.molgen.mpg.de/~pmenzel/rcutorture/allmodconf-Make.out.txt
> > > > > > > > > [2]: https://owww.molgen.mpg.de/~pmenzel/rcutorture/rcutorture-log.txt
> > > > > > > > >
> > > > > > > > > I am going to try to test your suggestions at the end of the day.
> > > > > > > >
> > > > > > > > On x86 rcutorture builds successfully. However, allmodconfig
> > > > > > > > on semi-recent -next got me "Can't open perl script
> > > > > > > > "./usr/include/headers_check.pl": No such file or directory".
> > > > > > > > Which might well be a local problem or might well be fixed by now.
> > > > > > >
> > > > > > > Not fixed as of next-20220118. Chasing it down... ;-)
> > > > > > I can do allmodconfig on -next,
> > > > > > $git describe
> > > > > > next-20220118
> > > > > > $tools/testing/selftests/rcutorture/bin/torture.sh --duration 10
> > > > > > --- tools/testing/selftests/rcutorture/bin/torture.sh --duration 10
> > > > > > --- Results directory: 2022.01.19-09.14.39-torture
> > > > > > $ ps -aux|grep qemu-system
> > > > > > zzy 470309 773 0.3 1876544 153936 pts/0 Sl+ 09:55 31:27
> > > > > > qemu-system-x86_64 -enable-kvm -nographic -smp 16 -net none -machine
> > > > > > q35,accel=kvm -cpu kvm64 -serial
> > > > > > file:/tmp/linux-next/tools/testing/selftests/rcutorture/res/2022.01.19-09.14.39-torture/results-rcutorture/TREE03/console.log
> > > > > > -m 512 -kernel /tmp/linux-next/tools/testing/selftests/rcutorture/res/2022.01.19-09.14.39-torture/results-rcutorture/TREE03/bzImage
> > > > > > -append debug_boot_weak_hash panic=-1 selinux=0 initcall_debug debug
> > > > > > console=ttyS0 rcupdate.rcu_cpu_stall_suppress_at_boot=1
> > > > > > torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000
> > > > > > rcutorture.onoff_interval=200 rcutorture.onoff_holdoff=30
> > > > > > rcutree.gp_preinit_delay=12 rcutree.gp_init_delay=3
> > > > > > rcutree.gp_cleanup_delay=3 rcutree.kthread_prio=2 threadirqs
> > > > > > tree.use_softirq=0 rcutorture.n_barrier_cbs=4
> > > > > > rcutorture.stat_interval=15 rcutorture.shutdown_secs=420
> > > > > > rcutorture.test_no_idle_hz=1 rcutorture.verbose=1
> > > > > > zzy 755865 0.0 0.0 17676 2876 pts/2 S+ 09:59 0:00
> > > > > > grep --color=auto qemu-system
> > > > > > $ ls -l vmlinux
> > > > > > -rwxrwxr-x 1 zzy zzy 69349872 1月 19 09:55 vmlinux
> > > > > >
> > > > > > Could you please try the following command ?
> > > > > > linux-next$ perl ./usr/include/headers_check.pl usr/include x86
> > > > > > usr/include/rdma/hfi/hfi1_user.h
> > > > > > linux-next$ echo $?
> > > > > > 0
> > > > > > The headers_check.pl in linux-next
> > > > > > (https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/usr/include/headers_check.pl)
> > > > > > is used to check the validity of head files in ./usr/include
> > > > >
> > > > > I am currently bisecting, but once that finishes I will give this a
> > > > > try, thank you!
> > > >
> > > > And the bisection converged badly due to there being more than one build
> > > > failure.
> > > Sorry to hear the bisection is not successful.
> > > >
> > > > So I ran the command above and then the build succeeded.
> > > I'm very happy that the command works.
> > > >
> > > > Though it would be good if the build worked from "make distclean"...
> > > I would be very honored if I could join the efforts to make the -next better.linux-next/tools/testing/selftests/rcutorture/res/2022.01.25-23.10.36-torture/allmodconfig
> >
> > One approach would be to download the -next kernels as they appear and
> > run tests on them. Reporting bugs is good, and of course fixing them
> > even better.
> This provides a nice way of participating the efforts to make -next
> better, and provides me a good way to learn new knowledge in -next!
>
> >
> > You can clone -next from here:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> >
> > Individual -next releases are tagged, for example, "next-20220118".
> I will clone -next from the tree, and will download the -next releases from
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
I cloned -next, and try to test rcu:
$git clone https://kernel.source.codeaurora.cn/pub/scm/linux/kernel/git/next/linux-next.git
(kernel.source.codeaurora.cn is Chinese mirror of git.kernel.org)
$cd linux-next
$git describe
next-20220125
$tools/testing/selftests/rcutorture/bin/torture.sh --duration 10
$cd linux-next/tools/testing/selftests/rcutorture/res/2022.01.25-23.10.36-torture/allmodconfig
$cat Make.exitcode
2
$grep Stop Make.out
make[2]: *** No rule to make target
'arch/x86/kvm//home/zzy/Program/linux-next/linux-next/tools/testing/selftests/rcutorture/kvm_main.o',
needed by 'arch/x86/kvm/kvm.o'. Stop.
I tried the above two times in two different machines today, they all failed.
Meanwhile I can config and build the kernel successfully by invoking
the build commands by hand:
$git clone https://kernel.source.codeaurora.cn/pub/scm/linux/kernel/git/next/linux-next.git
$cd linux-next
$git describe
next-20220125
$make allmodconfig
$make -j 16
Kernel: arch/x86/boot/bzImage is ready (#2)
GEN Module.symvers
$echo $?
0
I am very interested in this problem and I am eager to try to dig out
what happened and fix it before this Sunday. And it is more delightful
to me that other developers can solve this problem because they are
more mature than me ;-)
Many thanks
Zhouyi
> >
> > Me, I run torture.sh on them from time to time, depending on how much
> > other testing I am doing. So maybe once or twice a week. ;-)
> You are the example worth learning in my life, to be honest , I will
> do the same way as you do!
>
> Sincerely
> Zhouyi
> >
> > Thanx, Paul
> >
> > > Many thanks
> > > Zhouyi
> > > >
> > > > Thanx, Paul
> > > >
> > > > > > > > Either way, it looks like I need to upgrade the torture.sh script's
> > > > > > > > checks for failed builds. Thank you for reporting this!
> > > > > > >
> > > > > > > Does this make torture.sh more reliably report build failures?
> > > > > > I studied this commit line by line several times and benefited a lot. Thank you!
> > > > > > >
> > > > > > > Thanx, Paul
> > > > > > >
> > > > > > > ------------------------------------------------------------------------
> > > > > > >
> > > > > > > commit 0d302830515307ceb58e89d5fb91e81b6d22e0bf
> > > > > > > Author: Paul E. McKenney <paulmck@...nel.org>
> > > > > > > Date: Tue Jan 18 15:40:49 2022 -0800
> > > > > > >
> > > > > > > torture: Make kvm-find-errors.sh notice missing vmlinux file
> > > > > > >
> > > > > > > Currently, an obtuse compiler diagnostic can fool kvm-find-errors.sh
> > > > > > > into believing that the build was successful. This commit therefore
> > > > > > > adds a check for a missing vmlinux file.
> > > > > > >
> > > > > > > Link: https://lore.kernel.org/lkml/36bd91e4-8eda-5677-7fde-40295932a640@molgen.mpg.de/
> > > > > > > Reported-by: Paul Menzel <pmenzel@...gen.mpg.de>
> > > > > > > Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
> > > > > > >
> > > > > > > diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh
> > > > > > > index 2e9e9e2eedb69..7d3e11a6b8290 100755
> > > > > > > --- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh
> > > > > > > +++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh
> > > > > > > @@ -30,10 +30,15 @@ editor=${EDITOR-vi}
> > > > > > > files=
> > > > > > > for i in ${rundir}/*/Make.out
> > > > > > > do
> > > > > > > + scenariodir="`dirname $i`"
> > > > > > > if egrep -q "error:|warning:|^ld: .*undefined reference to" < $i
> > > > > > > then
> > > > > > > egrep "error:|warning:|^ld: .*undefined reference to" < $i > $i.diags
> > > > > > > files="$files $i.diags $i"
> > > > > > > + elif ! test -f ${scenariodir}/vmlinux
> > > > > > > + then
> > > > > > > + echo No ${scenariodir}/vmlinux file > $i.diags
> > > > > > > + files="$files $i.diags $i"
> > > > > > > fi
> > > > > > > done
> > > > > > > if test -n "$files"
> > > > > > Thanks
> > > > > > Zhouyi
Powered by blists - more mailing lists