linux-kernel - Re: earlyprintk=xdbc seems broken

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f1ac3163-d005-9b0b-b9f1-f4e98b9798d5@linux.intel.com>
Date:   Tue, 25 Jan 2022 19:13:03 +0200
From:   Mathias Nyman <mathias.nyman@...ux.intel.com>
To:     Sven Schnelle <svens@...ux.ibm.com>,
        Peter Zijlstra <peterz@...radead.org>
Cc:     Greg KH <gregkh@...uxfoundation.org>,
        Dave Hansen <dave.hansen@...el.com>,
        Lu Baolu <baolu.lu@...ux.intel.com>, x86@...nel.org,
        linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        Chunfeng Yun <chunfeng.yun@...iatek.com>
Subject: Re: earlyprintk=xdbc seems broken

On 25.1.2022 16.01, Sven Schnelle wrote:
> Peter Zijlstra <peterz@...radead.org> writes:
> 
>> On Tue, Jan 25, 2022 at 02:09:18PM +0100, Sven Schnelle wrote:
>>> Peter Zijlstra <peterz@...radead.org> writes:
>>>
>>>> Now the documentation states we need this super speed A<->A cable, but
>>>> could you also update the documentation for usb-c ? There's a fair
>>>> number of usb-c only devices out there now.
>>>
>>> Stupid beginners question: Would every USB3 A-A cable work, or are the
>>> debug cables special? I've read the RX/TX pairs have to be swapped, but
>>> to me it looks like that's always the case?
>>
>> I'm using a random USB3 A-A cable (it came with an HDMI frame grabber of
>> of AliExpress). The official one has a wire missing I think, to avoid
>> ground loops or something like that.
>>
>> The easiest thing to do is try the runtime DBC option:
>>
>>   echo enable > /sys/bus/pci/devices/0000:00:14.0/dbc
>>
>> If that works you can see what it takes to make the earlyprintk one
>> working. This thread seems to have much of that covered.
> 
> Thanks, the sysfs test works for me. I have two A-A cables, one is from
> a cheap PCI-e extender, the other one from a KVM switch. Both work,
> which is great. So i assume that most A-A cable would work. I'm building
> a new kernel now with the patch on top, lets see.
> 

I enabled runtime dbc on a Tigerlake 0000:00:0d.0 xhci, and connected the
USB-C port to a host using a USB-C to A adapter, and a cheap USB3 A-to-A cable.
Worked for me, but can't make any official recommendation.

I'm guessing the USB-C port works as long as the USB-C TX/RX pins are muxed
to a xhci.

With additional dbc patches it's possible to have dbc connected on both xhci
controllers at the same time (runtime via sysfs).

-Mathias